How to use a third party automation server

I would like to use the methods of another application. The application exposes the methods through an automation server. How can I use this automation server in Labview?
Do or do not, there is no try

Well, I am referring specifically to an application called RapidFET from FetCorp. The rapidFet probe is a box they sell that allows the user to access (SRIO) networks, "serial rapid IO". There is a large API with many methods that can used with SRIO and once you start the application I guess they run a automation server that exposes the methods for use in programs written in languages like visual basic, visual c++ and others; is that considered active x?
Do or do not, there is no try

Similar Messages

How to use the third party apps?

I see Apple has put some third party apps on their site, but how do you download them and use them for itouch?

I think you are talking about WebApps?(http://www.apple.com/webapps/). If you are they cannot be downloaded, but can be bookmarked to your homescreen if you purchased the update. If you didn't purchase the update they can be added to your Bookmark section. To access them you will need an internet connection.
Message was edited by: connorbj

How to use a third party datasource in java se use toplink jpa?

because i am working on a desktop app, i don't have a container.So i can't use a JNDI provider;
but i want to use proxool or dbcp connection pool instead of toplink's connection pool.
how can i handle this?
thx for your help

Define a SessionCustomizer that assigns your data source::
public class MySessionCustomizer implements oracle.toplink.tools.sessionconfiguration.SessionCustomizer {
public void customize(Session session) throws Exception {
session.getLogin().setConnector(new oracle.toplink.jndi.JNDIConnector(myDataSource));
}Pass it to createEntityManagerFactory method as a property
Map props = new HashMap();
props.put("toplink.session.customizer", "MySessionCustomizer");

How to use a Third Party DAQ evaluation board/ module

Hi to everyone,
This question may have occuerd earlier but I have never got a clear and direct answer for this.
ISSUE : I have a High Speed DAQ module DC1371A evaluation board from Linear technology [ http://cds.linear.com/docs/Demo%20Board%20Manual/dc1371A.pdf ].
Question: Since DAQ/DAQmx allows only Ni devices to be interfaced, how can I configure this module to work with labview.This module has a software Pscope [ http://www.linear.com/designtools/software/ . How do I proceed.
Thank you guys,
Abhi
Labview 11
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

I asked her and she told Linear Technology wont provide any kinda drivers to communicate with LV. If needed I have to use their PSCOPE program that displays the signals etc.
This is bad.
Can you guys please suggest any other DAQ module with ADC ( 14 bit and 250 msps) and a DSP board with it to process the data, Both of which I can communicate with LV without any hassle.
I am tired of waiting for other companies to offer some way to communicate with LV. or Please advice HOW TO GO ABT SETTING UP A HIGH SPEED ADC AND DAQ MODULE. I think its better I start from scratch.
Thank you
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

How to use a third party jar, which is added to classpath at runtime.

Hi
I'm using the classpathhacker posted on the forums somewhere, and want to use the jexcel driver.
What I want is to be able to use the excel functions only if the excel driver is availlable.
The problem now is that to be able to use the excel functions the driver has to be in the classpath, and it has to be imported when compiling.
That way the app will crash at startup if the driver isn't availlable...
Is there a way around this?

Wouldn't it be possible to catch the error thrown when the JVM can't find the used classes? That would prevent the program to exit, or not?
e.g.:
try {
// things that aren't available...
} catch (Exception ex) {
// error occured
}

How do I add video to be hosted directly on my MUSE site without using a third party site like Vimeo / You tube etc ?

How do I add video to be hosted directly on my MUSE site without using a third party like Vimeo / You tube etc ?

Hi,
You can consider html video tag to do this. You will need to add it in Muse using, Object-insert as html. Detailed instructions can be viewed here
HTML video Tag

I used a third party programme called Mackeeper UGHHH,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??how can i manually put these files back where they belong?SO upset!!

I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
how can i manually put these files back where they belong?
i know i should have used time machine but i have not set it up and its too late for that now
i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shane

hello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!

How can I force the close of a third party ActiveX server.

We have a third party ActiveX executable that refuses to shut itself down once in a while. And when I say once in a while, I mean one out of every 20-30 times it's attempted. All termination commands are being sent and recieved properly, and all refnums are being closed. No errors are ever generated, all operations report successful, but the thing just won't die. Problem is of course, that if we attempt to restart our software after the ActiveX app fails to terminate, it generates server execution errors when trying to open a new instance. We are not expecting a speedy resolution from the third party, but it is becoming a great inconvenience for our customers. I would like to be able to kill the process thro
ugh the OS as a last resort. Problem is, to do that I need a ProcID. Is there any way to retrieve a ProcID for the ActiveX server through LabVIEW? Alternatives and suggestions are welcome.

Hello codeman,
Thank you for your inquiry regarding closing a third party ActiveX server. It sounds like the third party application is having trouble closing. There are several Windows Utility VIs available that could help in this case. One of the Utility VIs is called Get Window Refnum and should return an instance of a Windows window. The following links are great resources when dealing with this issue.
http://digital.ni.com/public.nsf/websearch/136F6B1F34CBB76E852563FC007AEFC7?OpenDocument
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3EF4556A4E034080020E74861&p_node=DZ53008&p_submitted=&p_rank=&p_answer=&p_source=External
Other responses similar to these can be found on the ni.com website by clicking the support tab at the top
of the home page. Then search for �refnum instances� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
Shea C.
Applications Engineering

Ability to use external third party ETL tools removed?

Hi,
have just been looking the possibility of using a third party tool (Informatica, Business Objects Data Integrator) with NW2004s.
It appears that there is no longer a suitable source systyem type or at least there isn't in my Ramp Up system (SP7).
Does anyone know if the functionality required for this has been retired? Or is it still there behind the scenes and just needs to be used in a different way.
Many thanks,
Mike

Hi Andreas,
thanks for this.
It used to be that you needed an RFC destination from BW to the third party ETL RFC server, and a dedicated Source System for this and then the BAPI loader was used.
Not sure if I understand how this will be achieved with the 3.5x data sources as aren't these SAP only?
In the External Systems area of the source systems tab, there are some entries for:
RA 115     Oracle Applications 11i
LF 205     Tealeaf 2.05B
PD 020     SAP xPD
So it sounds like I create these as a SAP source system having previous done the RFC config?
Thanks for your help and a little more would be great!
Regards,
AB

DMS document migration from Third Party DMS server(Omnidocs)

HI guys,
I would like to migrate document from Third party DMS server to sap DMS server.
What is the apporach.
1. The thir party dms server is protected with login name and password.
How i can extract data from the software.
Please spread your thoughts on this.
what is the function module to download the contents of the server. by passing the url.
with regards
Giri

use ALE scenario to send the documents

Report export to third party syslog server

Hi all,
Is there a way to send the Cisco ACS secure server report to third party syslog server?
Example: for audit purpose, i need the data extract from Monitoring & Reports > Reports > Catalog > AAA Protocol
I trying by create new remote log targets, the IP is pointing to third party syslog server.
and at the logging categories > global, i apply the new create log collector to all logging categoires.
Am i doing it right?
please comment, thanks
Noel

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How SAP handles AFS Third Party Orders in ECC system?

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Basically when the Dierct ship Sales Order is created, corresponding PR is created for it and using this User exit certain fields in this corresponding Purchase Requisition is filled from Sales Order but this user exit is missing in ECC system.
Could anyone please let me know how SAP handles the Third party Orders in ECC AFS system?
Thanks,
Ameesha

Hi Ameesha,
Did u find out any solution for it? bcoz, am also hving the same issue!!
thanq

ADF mobile: How to pack a third party jars into apk

Hi Expert,
I am using Jdeveloper + ADF mobile 11.1.2.4 to develop an android application. In this application, I need to call some functions in the third party jar files. I need to add the third party jars into my apk so that those classes can be found during runtime.
I followed section 17.1.1.1 to add the libraries into my project. However, after I deployed my app to the emulator and tried to run it, it reported "encountered error: classes not found". And I also found that the third party jars don't exist in libs/ directory of the apk. Do you know how to solve the problem: How to reference a third party jar files in my app and make sure it works?
Thanks,
Yan

Create a /libs directory within Android project directory and copy the JAR files to /libs.
To build.properties add
external.libs.dir=libs

How will i configure third party sales order

pls tell me how will i configure for third party sales order

dear,
prasanta,
the configuration of third party sales order is given below
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
i think it will fulfill your requirement if so plz reward point.
ambarish

How to use a third party automation server

Similar Messages

Maybe you are looking for