How to use a timer in director to count down to quit

how to use a timer in director to count down to quit

Hello Christos,
I'm sorry, but I have to give you again some links, at the moment I don't have "selfmade" files for you.
First these Adobe help files:
http://help.adobe.com/en_US/Director/11.5/Beginners/WS287f927bd30d4b1f5218ba7912ff9103109- 7feb.html
http://help.adobe.com/en_US/Director/11.5/UsingScripting/WSc3ff6d0ea77859461172e0811d64c1a 1b3-7ae3.html
Second an interesting thread from the forum with a "cookbook":
https://forums.adobe.com/thread/1261561
Hans-Günter

Similar Messages

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use Real time execution trace toolkit with Dual-core processor??

hi there
the situation as follows:
i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
So, is it possible to use Real time execution trace toolkit or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for real- time hardware.???
in other words: how to use Real time execution trace toolkit in non-hardware and/or real-time scenarios???
please help me in this.
Any suggestion, comments, feedback.....is absolutely highly appreciated
thanks a lot in advance
Labview Lover

Hey,
The Realtime Execution Trace Toolkit only works for NI RT Targets.
But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
Christian

How i USe face time?

How i USe face time? But i dont have friends to try...how i fond friends for face time

To use FaceTime you must have a Wi-Fi connection to the Internet. 3G won't do it at this time.
Also, FaceTime may not be available in all countries or regions.
See page 65 of the iPhone iOS4 User Guide

How to use ftace time

how to use face time on i phone 4

iOS: Using FaceTime
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How to use the time machine?

how to use the time machine? because i don't know where to find the back up. can you please help me.. thankyou.

Time machine is a backup application and service that come with Leopard. When you plug in an external drive you can use it as a backup source. All you do is select the drive in the Time Machine control panel and start the backup. It will back up your whole drive and if you lose a file, go to the location on your drive where that file should be and open the Time Machine application. From there you will be able to migrate to all the points in "time" when the file was changed, and select the version of the file that you want. Then select "restore" and the file will be restored to the location where it last was on your drive.
For more information check out the Time Machine website:http://www.apple.com/macosx/features/timemachine.html

When watching an item ending in ebay/firefox, the time remaining doesn't count down.

When watching an item ending in ebay/firefox, the time remaining doesn't count down. However I'm sure it used too.

Just an update...
I took my computer into the Apple Store and they gave me a new battery (again). I also erased my hard drive and reinstalled Lion. I am still having the same problem with my battery icon not counting down (when i have the power cord unplugged). Another thing I may have not talked about is when I unplug my power adapter from my MacBook the screen used to dim slightly, It no longer does that. Hmm. And yes I have checked the power settings.
I am seeing a big difference in my new battery though. The 6 month old battery I was using before my replacement wasn't lasting but maybe and hour before completely turning off my laptop. SInce I got my replacement battery I am back to a regular battery life. Maybe a couple issues going on here...
As a fix, I purchased Battery Guard from the app store and placed the icon on my tool bar. It actually counts down my battery life as a percentage. So its a huge help. I just don't know why the native Mac icon isn't working properly?? One thing I have noticed is the 3rd party app will only count down using a Percentage. But, like the native Mac icon it will not count down using time. Something else to add... After using my battery, and I plug my MacBook back in, the battery icon will count up. Kinda strange that it will count up but not down.
Dstppy, any luck at the Apple Store?

Rendering pitch and time in multitrack. Counts down to 0 then restarts

rendering pitch and time in multitrack. Counts down to 0 then restarts. After stretching a clip in multitrack I then hit render. It is a big clip stretching from 45 min to 120 mins. It counts down from ver an hour then restarts. Any clues folks?

Are you sure you mean multitrack?
AFAIK, only the Automatic Pitch Correction works in multitrack--and it tries to work in real time rather than rend later. I'm not even offered Time and Pitch as an option in my multitrack effects rack.
(But I'm having a particularly dense, not enough sleep, looking after my grandson kind of day.)

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use my time capsule on my new macbook pro retina (time machine error)

Hello all,
I've been using my old mac for a while with my time capsule, but recently I bought the new macbook pro retina and I wanted to use the time capsule as the backup disk on the new one. However, whenever I try to run the backup, a message appears "The backup disk image “/Volumes/Data/XXX’s MacBook.sparsebundle” is already in use."
I wanted to override the settings so that the new macbook will use the time capsule for its backup disk instead of the old one, as I will no longer be using it.
I was wondering if anyone had this problem before and if anyone know how I can solve it?
Thank you

You could delete the old backup from your old laptop? If you need to keep it then you need to rename that folder so that your new macbook can creatie its own file in the same name.
Regards,
Ryan

How to use my Time Capsule with my Router?

My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580.
I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get my Apple Time Capsule back into my netowrk.
I would either like to understand how to use the Motorola as a switch or just as a modem so I can use the Time Capsule as my router or vica versa, use my Time Capsule as just a back up drive and leave the Motorola as my rwireless router. The onyly thing about this second configuration is that I need to connect to the Time Capsule wirelessly with one of my computers for back up, the other two are both on an ethernet port hard wired.
So this is what I have to put in place:
Motorola Wireless Cable Modem
Time Capsule
5 Port EasyNet Switch
iMac Desktop (Ethernet hardwired)
Macbook (Ethernet hardwired)
MacBook (wirelessly connected to the network)
Any thoughts great appreciated.
Henry

It's likely that your ISP will require that the Cable Modem is the first device in the chain. You do need to set the Time Capsule to Bridge mode, disabling the DHCP. Now, the Cable Modem is providing DHCP to devices that connect to it, and devices that connect to the Time Capsule.
You will be able to wirelessly connect to the Time Capsule and network.
Here is a simple article explaining:
http://www.ehow.com/how5309467bridge-time-capsule-mac-pc.html

How to use mask in adobe director 11.5 without any language(lingo), just animation in timeline

He people i have this problem i have to use mask, in adobe director, but i don't know how to do it, its kinda diferent then flash, i'm brazilian, my english isn't very good, so sorry everybody for any wrong word.
what i should do ?
don't wanna use Lingo or something like that

hmmm, i don't know how to explain so much, but i'll try, i don't know if you know flash, but in it have a thing called mask.
show just a part of the shape without code, just using the timeline

How to use 2 Time trigger UI elements

Hi Experts,
My user doesn't want to see the time out error in the webdynpro application after leaving(idle mode) the browser for hours. And one more thing is he wants a popup for every 15mnts to show a message on the screen.
So, I have used 2 Time Trigger UI elements to achieve this functionality,
      1st one(Time Trigger UI Element) is used to show the pop up message and It is working fine to show the message in a Pop Up .
      2nd one is used to handle the Time Out Error for hours and this is not working as expected, if user leaves the browser for hours .
I hope you understand my requirement and issue.
Could you please suggest me how to achieve this functionality.
1000 Thanks in advance.
Regards,
Giri

Hi,
If I set the 3 hours to 2nd Time Trigger UI element and tested after 2 hours and browser is still throwing the time out error message.
After 2hrs is the time out error throwing by the Timed trigger or the standard session time out? I believe after 2 hrs the standard session time out is throwing! You need to give the delay time less than your session time out.
You can get the session timeout using wdr_task=>server->session_timeout ( in mins ) And you can get the application server time out using
data: name type pfeparname,
        value type pfepvalue.
name = 'rdisp/plugin_auto_logout'.   " parameter
call 'C_SAPGPARAM' id 'NAME' field name
                                    id 'VALUE' field value.   " value contains time out
Regards,
Kiran

How to use real-time tracking and filing in EchoSign

Click the link to learn how to use the notification, tracking, and filing features available in the Adobe electronic signatures service, EchoSign.

Hi,
You can observe the data for executables with the RTSM. Just be sure to
first go to the Tolls>>RT Taget [x.x.x.x] Options and configure
the VI Server to use TCP. Then add your desktop machine to the Access
List on the TCP/IP Access tab. Now VI server should be able to export
the info. about the executable.
Richard
Applications Engineer
http://www.ni.com
Richard
Field Sales Engineer, New Jersey
National Instruments

HT3775 how do use quick time i click on icon and nothing

I am trying to use quick time and when click I incon it will not open

jokaro wrote:
I am trying to use quick time and when click I incon it will not open
Try posting and doing a search through the Quicktime forums.
https://discussions.apple.com/community/mac_os/quicktime?view=discussions
Good Luck
Pete

How to use a timer in director to count down to quit

Similar Messages

Maybe you are looking for