How to use a variable made inside a movie clip from outside

I have been searching for ages and just cant find out how to do this!
i have set a boolean variable inside a movieclip and would like something to change outside the movieclip, using an if statement, depending on whether the variable is true or false, but cant find out how to do it anywhere!
this may be a nob question but any help will be greatly appreciated

Your movieclip will need to have an instance name assigned to it (via the Properties panel). Then you should be able to use that name to target the variable...
mcName.boolVar = etc....

Similar Messages

How to use common event handler for selected movie clips?

I have a 50-state map in a flash movie. Each state is a movie
clip.
Goal: when mouse moves over a state or is clicked in a state,
the state will be highlighted in a bright color and a small box
will pop up near the state and display some information about the
state.
Question: I know I can add mouse event handler for each state
movie clip. But this is simply not good since this has to be done
50 times and codes thus scattered different places. Ideally, I only
want to have one script that determines where the mouse position is
when events trigged and then do right things (highlight the state
and display info. in a pop-up). How can this be implemented?
Thanks!

There are a number of ways. Which way is best depends on how
you have things set up so far.
E.g. If they have an enumerable naming convention:
e.g. each clip is like state_0 , state_1 etc.
Then you can loop through them and assign them all to the
same mouse event handler via the loop. You would need properties
other than the name of the clip to identify the state. E.g. each
clip could contain its own data or the index could be a pointer to
the state data (objects with state name and info properties) in a
separate array.
//state clips named
for (var i=0;i<50;i++) {
this["state_"+i].stateindex=i;
this["state_"+i].onPress= statePressHandler;
var stateData:Array = [{name:"StateName,info:"this state
Info"}, name:"StateName,info:"this state Info"}, etc...]
function statePressHandler() {
trace(this);
trace(stateData[this.stateindex].name+"="+stateData[this.stateindex].info);
Other ways are possible too but the best approach depends on
how you have named the clips and whether you're creating them with
code or whether they're already on stage from authoring (my guess).
If they're already on stage and they're called "Alaska" etc, then I
would be inclined to put them all inside a container clip that
contains nothing else other than states. It would avoid the need
for an array of clip names or for checking some other specific
property of each clip to determine if its a 'state' clip and not
something else in a for..in loop.

How can i change the date of imported movie clips from mini dv?

i imported 1 hour of video from the same tape and created 1 event for all of them.but the date of it is today so imovie is showing it under 2011 when it is 2008? i tried the terminal command touch -t 200806061200 and then draging the event from movies-imovie events to the terminal, i also tried the touch -mt but its not working The folder itself changed dates but not all the clips inside it?

Hi Karsten
Me just adding in - tried this date and time change and as I get it
• iMovie'08 - can't be done - Right-Click or Shift-Click or whatever-Click - just don't work
• iMovie'09 (and most probably iM'11) - Exactly as describet - BUT one must ctrl-Click on one CLIP at a time - Can't be done to a full Event in one stroke (at least I can not figure out how)
(Now I did figure it out - Select Clip one - keep Shift-key down and select last clip in Event - then when all is selected ctrl-Click in one of them and Change Date & Time and all will change)
Yours Bengt W

Shipment of external archive inside of movie clip, is outside of the place

Neste caso não quero criar um movie clipe apartir de código. o movie clip , já existe no palco.
o traço que aparece no canto inferiro da tela indica o arquivo externo, mas como referência o traço está no centro do arquivo.
a referência é o quadro cinza.
Código:
stop();
alvo1.loadMovie("conforto.swf");
o movie clipe esta instaciado como " alvo1" .
estou ultilizando o action script 2.0.
In this in case that I do not want to create one movie clip to apartir of code. movie clip, already exists in palco. the trace that appears in it I sing inferiro of the screen indicates the external archive, but as reference the trace is in the center of the archive. the reference is the gray picture.
stop (); alvo1.loadMovie ("conforto.swf"); movie clip this instaciado as " alvo1" .
I am ultilizando action script 2.0 the reference is the gray picture.

victor, tudo bem?
Eu também estou aprendendo AS só que é a versão 3.
Ai não entendi algumas coisas. No título do tópico você diz que é em AS3, depois, no corpo do tópico você diz que é em AS2?
Também não sei se entendi direito o problema que você está tendo. Dentro do seu arquivo conforto.swf você só tem aquele traço branco ou todo o quadro cinza? Já tentou "brincar" com as propriedades .x e .y do seu movieClip?
Abraço!

How to use the variables used in the message mapping

Hi ,
In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
Please guide me how to use the variables declared in the JAVA section in the message mapping .
Thanks
Anita Yadav

Anita,
I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
If you declare a variable in the Declaration Section ,
int i;
then in any udf you can use if directly. No need to re declare the variable in the UDF. If you do this, then it becomes a local variable.
Regards,
Bhavesh

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

How to use bind variables in this procedure

Hi Experts,
How to use bind variables in this procedure for static queries.
PROCEDURE DELETE_MER_PROC (M_id IN NUMBER)
IS
BEGIN
V_date DATE;
SELECT PD_DATE INTO v_date FROM PD_MAINTAIN;
    DELETE FROM MER_CLEAR
    WHERE MER_DT < v_date
    AND ID = M_ID;
COMMIT;
END;
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
Please help me.
Thanks.

976208 wrote:
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
You cannot avoid hard parsing - as the 1st time a SQL statement (like the SELECT or DELETE statements in your code) is encountered, it does not reside in the server's Shared Pool, and needs to be added into the pool via a hard parse.
Bind variables does not prevent hard parsing. Hard parsing happens when the SQL statement (with or without bind variables) is a brand new statement encountered by the server.
Bind variables enables the same SQL cursor to be reused, by simply changing the bind variable value.
Not using bind variables means that each SQL statement is unique and not shareable - as the value is hardcoded into the statement and cannot be changed via a bind value. This typically means LOTS of different SQL statements (where the only difference is the changed value in the statement) are created - with each statement being a new statement not seen before in the Shared Pool and needing to be hard parsed.
One does not design one's code not to be hard parsed. There ALWAYS will be a hard parse in order to get a SQL statement into the Shared Pool. One designs one's code to REUSE cursors in the Shared Pool.

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to use bind variable

Hi,
I have the below cursor 1 which is working already.For my requirement i want to use bind variable like second cursor.But its telling Bind Variable "p_col_list" is NOT DECLARED.Please any onehelp me on this.
How to use bind variable Here.
Cursor1:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql ;
END;
Cursor2:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(:p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql using p_col_list;
END;

hello,
the reports parameterform capabilities are limited. if you want
to create sophisticated parameterforms, you should do that with
oracle forms or html forms.
regards,
the oracle reports team --pw

How to use ADF variables in C:when test?

I have a <af:iterator in my page fragment as follows
<af:iterator id="i1" value="#{queryModel.currentDescriptor.conjunctionCriterion.criterionList}" var="criterion" varStatus="vs">
Within this iterator, I want to make a decision absed on the index of the iterator. To do this test, I am using jstl as follows
<c:when test="${vs.index == '0' or vs.index == '2' or vs.index == '4'}">
This test is however always evaluating to false. I have tried cahnging my code using various combiantion as below ...
<c:when test="#{vs.index == '0' or vs.index == '2' or vs.index == '4'}">
<c:when test="${vs.index == 0 or vs.index == 2 or vs.index == 4}">
<c:when test="${vs.index == '0' || vs.index == '2' || vs.index == '4'}">
But nothign seems to be working fine.
Can some one help me with what I am doing wrong?
Thanks.

How to use ADF variables in <C:when test?

How to use a variable on columns using Oracle Data Integrator

How to use a variable in oracle Data Integrator expically on colums.

yes exactly,i selected update on new column,if i didn't select update on new colum then error is not coming regarding update.
but this time error is coming on "insert new rows".
java.lang.NullPointerException
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskPreTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source).
Can u please tell me what stpes i have to follow to solve this

How to use h:selectOneRadio tag inside h:dataTable tag

Hi All,
Can any one tell me how to use <h:selectOneRadio> tag inside <h:dataTable> tag and how to get selected radio button value in bean ?

JSF<h:selectOneMenu value="#{myBean.selectedItem}">
    <f:selectItems value="#{myBean.selectItems}" />
</h:selectOneMenu>MyBeanprivate String selectedItem;
public String getSelectedItem() {
    return selectedItem;
public void setSelectedItem(String selectedItem) {
    this.selectedItem = selectedItem;
public List getSelectItems() {
    List selectItems = new ArrayList();
    selectItems.add(new SelectItem("key1", "value1"));
    selectItems.add(new SelectItem("key2", "value2"));
    selectItems.add(new SelectItem("key3", "value3"));
    return selectItems;
}String selectedItem should contain the key (key1, key2 or key3) when selected. The values (value1, value2 and value3) are the options as shown in the list.

How to use shared variables?

Hello..
Can anybody please guide me in using shared variables... I'm learning LabVIEW 8.5.... But did not understand how to use shared variables... I tried to read web pages regarding shared variables but got confused.... So anyone can please help me...?
Thanks for any help from you...

You will have to give us the whole picture. What is your client computer; a PAC, desktop etc? What are you running on the client computer; a VI or an executable? Where are you going to deploy your library? On the host machine or the client machine?
If I assume that you are running a VI on the client machine and are depolying the library on the host, all you have to do is to create another shared variable and bind it to the variable on the host machine. You can do this by checking the Bind to Source option when creating the variable and browsing to the network item in options. Be sure to have the library deployed on the host side before you attempt to do this otherwise you won't be able to find the variable.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How to use string variable onside quotes

Hi,
i would like to know how to use string variable onside quotes. what i mean is if i have a LOV variable P_STATUS as character string.
and in my PL/SQL function i give a query as
Q AS VARCHAR2(1000) := 'SELECT * FROM EMP
WHERE STATUS = :P_STATUS';
Is this correct. I Know that the above statement works when the LOV is an integer, but when i use a character LOV return value the above statement does not work. how can i get in the character LOV value.
Can someone help me please.
Thanks,
Philip.

916753 wrote:
Yes I tried binding all the values separately. It is working, but, I am trying to pass all values by variableBut you can't. The variable is holding a single string value.... that is just 1 value. Your binding are expecting multiple values. You can't bind 1 string value and expect Oracle to magically know how to break your string up into seperate values for the bind variables. What if one of your bind variables actually needed e.g. a comma seperated string as it's value? How would Oracle know that?
You must bind each thing seperately. That's the way cursors work.
, because i have more than 150 tables in which data will be load. that's why i m trying to create a unique procedure to load data one by one table. Otherwise I have to write individual procedures for per procedures.It's a hard life being a software programmer, but somebody's got to do it. Unfortunately there are too many people who try and write "generic" procedures and expect them to just work. I mean why don't Oracle just implement some SQL command so you can do...
execute immediate 'load all my tables';save us all the hassle eh!? ;)
when i write all the columns like
execute immediate (insert_string) using rc1.TOLL_ID, rc1.LANE_ID, rc1.RECEIVED_DATETIME, rc1.LANE_QUERY, c1.EXECUTED_DATETIME
but it is not possible to generate runtime variable thats why I m trying to assign all values to a single variable and use it like
execute immediate (insert_string) using (v_string)
how can I separate the values and ho to use it .Don't use execute immediate. Use the DBMS_SQL package instead and bind your values dynamically with loops to cover all the columns you need etc.

How to use a variable made inside a movie clip from outside

Similar Messages

Maybe you are looking for