How to use a WebService Model with String Arrays as its input parameter

Hi All,
I am facing the following scenario -
From WebDynpro Java i need to pass 2 String Arrays to a Webservice.
The Webservice takes in 2 input String Arrays , say, Str_Arr1[] and Str_Arr2[] and returns a string output , say Str_Return.
I am consuming this WebService in WebDynpro Java using WEB SERVICE MODEL. (NWDS 04).
Can you please help out in how to consume a WSModel in WD where the WS requires String Arrays?

Hi Hajra..
chec this link...
http://mail-archives.apache.org/mod_mbox/beehive-commits/200507.mbox/<[email protected]>
http://www.theserverside.com/tt/articles/article.tss?l=MonsonHaefel-Column2
Urs GS

Similar Messages

How to use Adaptive WebService Model with CAF WebService and Complex Type

Hi All,
I am trying to use the Adaptive Web Service Model and call a WebService generated by the CAF. The return type of the WebService is a Complex Type.. I receive an exception when trying to instantiate the Model Node.
Does anybody know how to use the Adpative Web Service Model with CAF WebServices and Complex Types as return type?
Help is appreciated..
Thanks, Johannes

Thanks Mukesh.
It is not possible to apply the Service Controller Template on Enterprise Java Bean Models as described in the Document. When I try to aply the template on the EJB Model, NWDS says: Only Webservice Models and RFC Models are supported...???
I did not find any information about how to return complex types in AWS.. in this document???
Is there such information available? Has anybody ever done that? There must be a way to do that.. Is is the standard approach, isn't it...? Please help me out there.. I need to get this running..
Thanks, Johannes

How to use a menu model with a dynamic region and a task flow parameter

I am using JDeveloper/ADF 11.1.2.1
I have a menu model that changes which task flow is displayed in a given dynamic region using a backing bean. That works fine. I would like to be able to pass parameters to that task flow based on which menu item is clicked. For example: i have a task flow which shows a page where input fields are used to filter a table. Depending on the value of the task flow parameter I want to change which input fields are displayed. So i will have multiple menu items which refer to the same task flow but have a different set of parameters. I have tried using request scope variables and setting them in the backing bean for the dynamic region which works until the query is submitted at which point the request scope has changed and the value is no longer available. I have tried a number of other 'creative' approaches but have not gotten anything to work. Anyone done this before? Or have an idea on how to solve it?

Frank,
I did a fair bit of digging based on your suggestions and some things I found in your Oracle Fusion Developer's Guide book and I came up with something that works really well. It is fairly elegant but requires code. It would be nice if something like a setPropertyListener could be rolled into the menu model. That would make my solution completely declarative.
Here is my solution:
My task flow requires a the value #{pageFlowScope.type} to be set. My application has a dynamic region that is changed on the fly using a menu model. The region uses a backing bean (mainRegionManagerBean) which is in the viewScope to manage what taskflow is shown in the region. There are multiple menu items in the menu model that point to the same task flow but pass different values to the #{pageFlowScope.type} parameter. So i wired the menu items up to different methods in the mainRegionManagerBean which set the value for me. See the relevant code below.
I would be very interested in the feedback from someone with more experience than I on my solution. Maybe there is a more elegant way...
In the backing bean there is a primary method that was created by generating a dynamic region link which sets the task flow id and then other methods which call it and set the relevant parameters. (JSFUtils is a helper class i wrote to centralize some common tasks):
public String shipmentTraceMasterTaskflow()
taskFlowId = "/WEB-INF/taskflow/master/shipmentTraceMasterTaskflow.xml#shipmentTraceMasterTaskflow";
JSFUtils.setValue("pageFlowScope.type", "");
return null;
public String shipmentTraceProNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "pronumber");
return null;
public String shipmentTraceBOLNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "bolnumber");
return null;
In the menu model (notice that these reference the different methods from above):
<itemNode id="itemNode_ProNumberTrace" label="ProNumber Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceProNumber}" focusViewId=""/>
<itemNode id="itemNode_BOLNumberTrace" label="BOL Number Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceBOLNumber}" focusViewId=""/>
On the page:
<af:region value="#{bindings.dynamicRegion1.regionModel}" id="r1"/>
In the pagedef:
<taskFlow id="dynamicRegion1" taskFlowId="${viewScope.mainRegionManagerBean.dynamicTaskFlowId}" activation="deferred" xmlns="http://xmlns.oracle.com/adf/controller/binding" Refresh="ifNeeded">
<parameters>
<parameter id="type" value="#{pageFlowScope.type}"/>
</parameters>
</taskFlow>
Edited by: Adam Stortz on Nov 22, 2011 11:10 AM

How to use list of data in an array as an input?

Hi,
I had an array with quite a number of complex data in it. I wanted to use it as an input to a function and plot it. I want the data in the array to be input one by one start from the top of the array till the bottom and feed it to the function accordingly. I'm having problem to do this. I tried 'for loop' but it will only output it after the loop finish running which not really desirable as the output from the function are to be use in other function and this introduce lagging. Any other method?

Yeap.. thats the problem. I used this for loop before but it only update the value within the loop.. To use the transfer function I need to use another loop called Control and Simulation Loop. Attached is the modified file. I tried using global or local variable but it wont update until the for loop finish all the iteration which only gives out the final value in the array to the transfer function.
Attachments:
chart[1].vi ‏57 KB

How to use ora:parseEscapedXML() Function with String Content

Hello,
I am receiving a ResponseMessage that returns a string, but the content of the string is actually XML. I have tried to use the ora:parseEscapedXML() function to parses the string (see XML Fragment below) to return structured XML data that can be assigned to typed BPEL variables. The documentation is very limited for this (I've looked in the Developer Guide draft that is available at the OraBPEL site).
2 customer records from XML literal fragment copied from string result:
<?xml version="1.0" encoding="ISO-8859-1"?>
<recordset>
<customer>
<CustNum>AROUT</CustNum>
<CustLName>Hardy</CustLName>
<CustFname>Thomas</CustFname>
<CustEmail>[email protected]</CustEmail>
<CustAddress>120 Hanover Sq.</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>WA1 1DP</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
<customer>
<CustNum>BSBEV</CustNum>
<CustLName>Ashworth</CustLName>
<CustFname>Victoria</CustFname>
<CustEmail>Victoria.Ashworth@B's.com</CustEmail>
<CustAddress>Fauntleroy Circus</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>EC2 5NT</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
The copy rule for assigning CustNum to accountnumber that fails:
<copy>
<from expression="ora:parseEscapedXML(bpws:getVariableData('DataService_OutputVariable','invokeSpecMsgReturn','/recordset/customer/CustNum'))"/>
<to variable="outputVariable" part="payload" query="/client:QueryResult/client:customer/client:accountNumber"/>
</copy>
Any help would be greatly appreciated.
Thanks,
Sean

Hello,
I am attempting to provide more information in order to hopefully get some better guidance here.
1) The BPEL process I built receives input from a client that is one of city name or region name or postal code or country name and returns a list of customer records with their AccountNumber, LastName, FirstName, Email, Address, City, Region, PostalCode and Country. The BPEL flow invokes a packaged integration Web Service that retuns the records in a string whose content is XML (see XML fragment below).
2) The string content returned is vaiable based on the input (i.e. city name="London")
Two customer records from XML literal fragment copied from string result:
<?xml version="1.0" encoding="ISO-8859-1"?>
<recordset>
<customer>
<CustNum>AROUT</CustNum>
<CustLName>Hardy</CustLName>
<CustFname>Thomas</CustFname>
<CustEmail>[email protected]</CustEmail>
<CustAddress>120 Hanover Sq.</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>WA1 1DP</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
<customer>
<CustNum>BSBEV</CustNum>
<CustLName>Ashworth</CustLName>
<CustFname>Victoria</CustFname>
<CustEmail>Victoria.Ashworth@B's.com</CustEmail>
<CustAddress>Fauntleroy Circus</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>EC2 5NT</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
I want to <assign> each record from the packaged integration service result (the string whose content is XML) to a complexType variable defined within the BPEL Process WSDL (see example below).
XML fragment from BPEL WSDL:
<element name="QueryResult" type="client:recordType"/>>
<complexType name="recordType">
<sequence>
<element name="customer" type="client:customerType" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="customerType">
<sequence>
<element name="accountNumber" type="string"/>
<element name="lastName" type="string"/>
<element name="firstName" type="string"/>
<element name="email" type="string"/>
<element name="address" type="string"/>
<element name="city" type="string"/>
<element name="region" type="string"/>
<element name="postalcode" type="string"/>
<element name="country" type="string"/>
</sequence>
</complexType>
I have read through the tutorial and reviwed the XPath Funtion example in the reference (C:\OraBPELPM_1\integration\bpelpm\orabpel\samples\references\XPathFunction), but I am stsill very unclear as to how to handle this. I would appreciate any and all help.
Thanks,
Sean

How to use a complex model with levenberd-marquardt vi

I am trying to use the Levenberg-Marquardt vi. My problem is that I have a model that predicts a complex valued impedance spectrogram. The model requires for input the 3 parameters as well as a collected complex valued data vector also as input to produce a prediction for a complex valued impedance spectrogram vector. I want to use the LM vi to curve fit the 3 parameters against a seperately collected experimental impedance spectrogram. Can this be done or is this a limitation to LabView V6.02 at the present. I have looked all over the website and found no reference to using a complex valued model in conjunction with either of the 2 LM vi's supplied.
Thanks many,
jim

Jim,
I looked into the Levenberg-Marquardt VI and it does not appear to support complex numbers. The X and Y arrays are doubles, not complex numbers; therefore you will not be able to use the VIs as they are.
The code is all open source so you could attempt to modify it so it would support the complex numbers. Another idea I had was to try to break the complex number up into either real and imaginary, or r and theta, and feed those arrays into the algorithm, however it only accepts 1-D arrays as inputs, so again you would have to modify the code to handle 2-D arrays as inputs.
I am not sure if there is any way to do it , but if you could convert the complex data set into a single dimension number and modify the model to handle the change in the data you coul
d use the VIs as is. Like I said I am not sure if this is a possible solution but it is an idea.
Happy Coding
Evan

How to use the JE database with other data types than byte arrays?

Hi! I searched the javadoc of Berkley DB JE, for a way to introduce entry (but I need also retrieve) data with other type than byte arrays, e.g. String, or anything else, as int may be, etc.
Still, I didn't find any such way, because the main (only?!) method to entry data into an open database - according what I found in javadoc - is:
"public OperationStatus put(Transaction txn, DatabaseEntry key, DatabaseEntry data) throws DatabaseException"
and both this and the corresponding method for retrieves, are based on the same DatabaseEntry type, which allow only entry data on byte[] support.
What if I need to use Strings or int, or even char? I must do a special conversion from these types, to byte[], to use the database?
Thank you!

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

How to use a Webservice (deployableproxy) within a portal component?

hi,
i need to know how to use a webservice using a deployable proxy within a portal component?
i've created the proxies and they work (with servlets).
i know how to use them in servletes (context lookup, jndi mapping, application references) but i cant find a way to use them in a portal component.. tried the context lookup way but cant figure out which jndi mapping to use.
any help?
thanks in advance,
constantin

i've found this document:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/cb2e29578c0262e10000000a11466f/frameset.htm
but it doesn't help...
i should add a privatesharing resource...
<property name="PrivateSharingReference" value="SAPJ2EE::rh21.de/pca~wsproxy"/>
which works
this is my code
public void doContent(IPortalComponentRequest request,IPortalComponentResponse response) {
 try {
 Context context = new InitialContext();
 WSPhonebook obj = (WSPhonebook) context.lookup("/wsclients/proxies/rh21.de/pca~wsproxy/de.rh21.wsproxy.phonebook.WSPhonebook");
 WSPhonebookViDocument phonebook = (WSPhonebookViDocument) obj.getLogicalPort("Config1Port_Document", WSPhonebookViDocument.class);
} catch.....
now the lookup works (i guess, no messages about that anymore), but i catch ClassNotDefFoundError-Exceptions, but the classes are there, i can strg+click them in the editor, they are in the used dc's etc.
any help? its quite uurgent :/

How to use replace(CharacterSequence, CharacterSequence) in String class

Need simple java program using the following
how to use replace(CharacterSequence, CharacterSequence) in String class
Kindly help

From http://java.sun.com/j2se/1.5.0/docs/api/java/lang/String.html#replace(java.lang.CharSequence,%20java.lang.CharSequence)
replace
public String replace(CharSequence target,
CharSequence replacement)Replaces each substring of this string that matches the literal target sequence with the specified literal replacement sequence. The replacement proceeds from the beginning of the string to the end, for example, replacing "aa" with "b" in the string "aaa" will result in "ba" rather than "ab".
Parameters:
target - The sequence of char values to be replaced
replacement - The replacement sequence of char values
Returns:
The resulting string
Throws:
NullPointerException - if target or replacement is null.
Since:
1.5

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to use digital av adapter with iphone4

How to use digital av adapter with iphone4

you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
the iphone4 don't support mirror though so only apps which support tv out will work with it

How to use a iPad mini with a projector

How to use a iPad mini with a projector

Use an AirPlay compatible device, such as an AppleTV or an AirPlay compatible AVR.

How to use a WebService Model with String Arrays as its input parameter

Similar Messages

Maybe you are looking for