How to use a Wifi connection with a Bluetooth and BB Curve 8320 with a laptop.

Hello All from Paris - France-
First soory for my poor english writing.
My question is simply, I already use my BB Curve 8320 as a modem.
But what I'm looking is to use my BB Curve 8320 by Bluetooth and use my WIFI connection.
I did many search but all resultats is using the "modem provider" and not Wifi connection.
In advance many thanks and regards.
Jean-Achille

Please go to the wireless tab for all the information you need. Click the link below for instructions. Let us know how it goes.
Checking the Wireless Settings on a Linksys Router
Connecting a Wireless Computer to go Online Using a Linksys Router

Similar Messages

How to make the wifi connection with Ipad in china since it requires user's name and password.

How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
If I connect directly to the computer I have a good connection so it is not my ISP
I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
And just so you know . . . I have a smart TV and it is connecting to the net okay!

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How TO use configurable Database connection with ADF BC

I have developed a simple JSF/ ADF BC web application that connects to a database and read/display data from the db tables. I have successfully deployed the application to Tomcat 5.5.17. However, now i need to change the database the application is connecting to. My question is How can I change the Database connection without having to change the application modules or rebuild the war file ??? In other words, is there a specific file (xml) where the database connection can be changed?

If you set up the application with a data source (I am not sure if this is possible using another app server, I use OC4J), then you would just change it there. However if you created a database connection in the JDEV and pointed your data model to that, then you will have to change and rebuild.
You might be able to edit the xml file that contains the setttings, I am not sure my CM guys dont allow this, all of our changes have to go through our code repository.

Cant use iphone4 wifi connect with home network

Updated iphone4 version 4.3.2 the phone still cant connect with home network via wifi! When before updated was everything normal!
Could anyone help?
I switched the rounter on and off and the securty ps from the rounter is correct! But it keeps sayin cannot connect with xxx network, and i have to keep "dismiss" it!
Please help, is the iphones problem or my rounter?

ive tried that also, completely disconnecting the modem and router but still same problem, updated iphone software, reset factory and network settings.. still nada thanks for your input tho

How can i fix my wifi connection with my router

how can i fix my wifi connection with my router?

I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA.
I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad. I'm unable to use the trackpad(bluetooth) and wifi at the same time. If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine. This configuration was working fine prior to upgrading to Yosemite.
I experienced the same problem at home and at the office.
Additional test:
I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA. The wifi disconnected as soon as I paired the headphones with the MBA.
I have had no problems with the MBA's keyboard or integrated trackpad.
Rick

BlackBerry Curve 8320 : How to setup the Wifi connection like a modem with a laptop.

hello All,
I have a BB Curve 8320 and It's already setup tu use the modem throught my provider : Tethered modem capability
What I ant it's use the Wifi connection like a modem with my Laptop.
Do you know how i can do that.
In advance many thanls and sorry for my poor english.
Regards,
Jean-Achille.

Instructions for using your BlackBerry as a Tethered Modem can be found here.
You should check with your Carrier before doing this as many charge very high fees for this use without a plan, and it's pretty expensive even with a plan.
Jerry

How can I fix an intermittent wifi connection with my MacBook laptop

I have experienced intermittent problems with the wifi connection on my MacBook (2006, 10.6.5 OSX) computer and noticed that other users have commented about this same issue. Not sure if the problem revolves around the updates from Apple or my wifi card but I only seem to loose my wifi connection with the MacBook. I have other Apple products, Iphones, Ipads and IMac and they all retain the wifi connection. Additionally, when I connect the internet cable directly to the MacBook, there is no loss of signal and I have no problem connecting to the Internet.
Does anyone have a solution to this problem?

After several unsuccessful attempts to resolve my intermittent wifi connection with a 2006 MacBook (I had service techs from Apple store, PeachMac and Computer Advantage check the intermittent wifi problem in store and they could not recreate this issue), I broke down and bought a new wifi card and installed it myself. The intermittent problem was resolved and my wifi connection works fine everywhere in my home. Ifixit's website has a great video that explains in detail how to remove and install a new wifi card and you will need the right tools and patience. Thanks to everyone that posted comments about this issue because the comments proved helpful in solving my problem.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to use digital av adapter with iphone4

How to use digital av adapter with iphone4

you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
the iphone4 don't support mirror though so only apps which support tv out will work with it

Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Using Juniper Network Connect with Lion

Has anyone had an luck using Network Connect to connect to a Juniper VPN with Lion? When I try to connect to secure network using Safari, Network Connect does not install and launch.

What version of Juniper are you folks running? We are still on 6.x (I'll have to check on what X is, I think its 5)
I enabled the java "enable applet plug-in and web sstart applications" and it still gets stuck on our host checker screen.   I set the developer Safari 5.0.6 and it actually gets past host checker, but does not present an option for network connect.
This tells me that host checker is running but no longer seeing what it needs to see (?) for the network connect option to be presented.   I was told by Juniper that an update needs to happen but it won't be availble until September.
Can someone verify they can actually get a network connect session working using Lion and safari 5.1 and how they got it to work, and what version of Juniper they are on?
If we need to get to 7.x we can do it on a test box but moving production there will take a good long time.   We *just* enabled the Mac VPN service at our company, and now those upgrading to Lion are finding themselves once again without VPN capabilities.    This is a real problem as we don't control weather they upgrade or not, and everyone wants to get to the latest OS.
Juniper is on its last legs at our company. This is probably the straw... they should have had this tested by now.

How to extend mobile wifi LTE with 2013 AirPort Time Capsule 2TB

At my home Im using HUAWEI E5776 4G/LTE mobile wifi for the internet/wifi connection and its working perfectly
Recently I bought 2013 AirPort Time Capsule 2TB, and Im trying to extend HUAWEI E5776 4G/LTE wifi connection with this Airport Time Capsule
Im using iMac airport utility but it seems there was a "crash" when I had choose the extending option, As it went nowhere
Does this airport can only be used with internet cable ?
I also have an old version of Airport Extreme which i can actually extend HUAWEI E5776 4G/LTE mobile wifi connection
I assume perhaps there is something need to be updated?
Other questions are
- iPhoto, would it be possible or "wise" to have all of my pictures in this airport and all of my Apple products can access it?
- iTunes, the same questions As above
because i get tried to have "double/triples or more" iPhoto/iTunes libraries in every of my iMac, MacAir, Macmini etc
Thanks for your help

The instructions for upgrade install of DD-WRT are very clear.. and simple although you should always take care. I read the instructions and follow them.. It might seem like obvious but 90% of the issues people get themselves into is caused by not reading the instructions.
DIR-632 has a set of specific instructions.
http://www.dd-wrt.com/wiki/index.php/D-Link_DIR-632
Follow them to the letter deviating neither to the left or the right.
And good results will follow.
As with any products in the domestic realm.. some are excellent .. some average and some stink real bad.
I have dealt with rotten products from all the major companies. Netgear still have plenty of stinkers out there.
Any universal wireless repeater should work.. be careful though with some products are actually not UNIVERSAL. I do take great care again to find out if people can use the Netgear with products from another brand. All wireless is voodoo .. wireless across brands is like voodoo plus plus.
My current Asus router is one of the best I have owned .. RT-AC66U.. far superior to what went before.
And I usually avoid dlink like the plague, but it is important to realise that amongst the dross there can still be specks of gold.

How to use a Wifi connection with a Bluetooth and BB Curve 8320 with a laptop.

Similar Messages

Maybe you are looking for