How to use/activate user exits

Hi all,
i wish to use user exit COZF0001...
however i have no experience how to do it. do i need an ABAPer or other consultant to do it or can i just activate it and make it work with minimal instructions?
kindly give procedure/overview how to activate/use user exits.
thanks in advance

Hi Ramesh,
Go to transaction CMOD . Create a project called ZVA01. Choose the Enhancement assign radio button and press the Change button. In the first column enter COZF0001.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Click on Save . Go to Components. You can now see that enhancement uses the user exit EXIT_SAPLCOZF_001. Double click on the exit and add your code.
Activate the include program. Go back to CMOD and activate the project.
-- Shivaji

Similar Messages

How to use MV45FZZ user-exits to validate PONumber

I want to detect duplicate PO numbers on sales orders. On VA01 I want to check if for the Sold-to-party is there already an Order with the some PONumber. Code to detect this is simple. The problem is what user-exit routine I should use (and how) in report MV45AFZZ.
There is a form called USEREXIT_MOVE_FIELD_TO_VBKD but how do I know in this routine that the screen field POOrder was changed, and not any other? I would like to make the check only once, after changing VBKD-BSTKD or XVBAK-KUNNR, not to any screen-field change.
Can someone give an help on this user-exit usage?
Thanks

yes. I didn't knew there were standard validations for duplicate POs
Where do I configure thais? in Sales Document types?
Thanks

MC94 - How to use the User exit EXIT_SAPMMCP6_002 to develop custom macros

Were implementing macros with the user exit EXIT_SAPMMCP6_002, but we see that the parameter table T_TAB doesnt contain all lines and columns viewed in the grid of transaction MC94 (Change Plan Consistent Planning).
Nevertheless, files and columns that are contained, arent shown in the order that they are visualized in the screen (MC94 - program SAPLMCPA screen 707).
Does somebody know how to update the grid visualized in that screen?
Thanks in advance for any help!

Hi,
Have you any luck with this yet. I am actually looking to do something similar but on the planning level.
To get the detailed level, you can try the following:
get the lines for this macro
CLEAR I_LINES. REFRESH I_LINES.
LOOP AT T_LINES WHERE KRIT1 = I_STRAT-AKT_PLOBJ
                    AND FLGIS IS INITIAL
                    AND STRUL = 'X'.
    I_LINES = T_LINES.
    APPEND I_LINES.
ENDLOOP.
get columns for this macro
LOOP AT T_COLS.
    LOOP AT I_LINES.
      READ TABLE T_TAB WITH KEY Z = I_LINES-LINE
                                C = T_COLS-COLUMN
                                BINARY SEARCH.
      IF SY-SUBRC EQ 0.
        I_COLS = T_COLS.
        APPEND I_COLS.
      ENDIF.
    ENDLOOP.
ENDLOOP.
SORT I_COLS.
DELETE ADJACENT DUPLICATES FROM I_COLS.
this should pull the values that are visually seen on the screen.
What i need is the values for ALL levels? I cant seem to figure this out.
Anyways, lemme know if the above was helpful.

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
HOW TO CREATE A USER-EXIT FOR MB31
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
 You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

How to find out user exit

Hi All,
How to find out User Exit in particular program.
I mean if you have one profile, how to find is there any user exits in that program.
Appreciate if any body tel answer.
Thanks & Regards,
Subbu

You could try searching the main program for "userexit_"
This would give you a list of all the available user exits within the application.
For Customer exits, you could search SMOD with a short description ex: order in the F4 help. Another way is to search for CUSTOMER-FUNCTION in the main program. You can then navigate to the enhancement in the customer function and use the Z Program in the enhancement.
http://www.easymarketplace.de/userexit.php - has a complete list.
More specifically, in case you're looking for SD exits - http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm.

How to find the user exits and BADIS from SPRO

Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
Madhavi

Hi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi

How to find the user exit for infotype 2013 ?

Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth P

reward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI.

How to use a user defined function module in IP

Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,

Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards

How to find the user exits called at the time of posting the IDOC?

Hi,
Could anyone please how to find the user exits while posting a idoc?

Hi,
One way to ahive this is by, be ready with IDOC postiong,
then go to ST05 transaction and activate the trace after checking Table Buffer Trace.
Now post the IDOC then deactivate the trace.
Now come back to ST05 and display trace and search for calls starts with EXIT_.
Regards,
Manoj Kumar P

How to find out user exits of t-code va03

hi all
 how to find out user exits of any t-code .
regards
deepak

Hi Deepak,
Try this code.
*& Report Z_USEREXIT *
REPORT Z_USEREXIT
NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
 tadir, "Directory of Repository Objects
 modsapt, "SAP Enhancements - Short Texts
 modact, "Modifications
 trdir, "System table TRDIR
 tfdir, "Function Module
 enlfdir, "Additional Attributes for Function Modules
 tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
 WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
 SELECT SINGLE * FROM tadir
 WHERE pgmid = 'R3TR'
 AND object = 'PROG'
 AND obj_name = tstc-pgmna.
 MOVE : tadir-devclass TO v_devclass.
 IF sy-subrc NE 0.
 SELECT SINGLE * FROM trdir
 WHERE name = tstc-pgmna.
 IF trdir-subc EQ 'F'.
 SELECT SINGLE * FROM tfdir
 WHERE pname = tstc-pgmna.
 SELECT SINGLE * FROM enlfdir
 WHERE funcname = tfdir-funcname.
 SELECT SINGLE * FROM tadir
 WHERE pgmid = 'R3TR'
 AND object = 'FUGR'
 AND obj_name = enlfdir-area.
 MOVE : tadir-devclass TO v_devclass.
 ENDIF.
 ENDIF.
Find SAP Modifactions
 SELECT * FROM tadir
 INTO TABLE jtab
 WHERE pgmid = 'R3TR'
 AND object = 'SMOD'
 AND devclass = v_devclass.
 SELECT SINGLE * FROM tstct
 WHERE sprsl EQ sy-langu
 AND tcode EQ p_tcode.
 FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
 WRITE:/(19) 'Transaction Code - ',
 20(20) p_tcode,
 45(50) tstct-ttext.
 SKIP.
 IF NOT jtab[] IS INITIAL.
 WRITE:/(95) sy-uline.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
 WRITE:/1 sy-vline,
 2 'Exit Name',
 21 sy-vline ,
 22 'Description',
 95 sy-vline.
 WRITE:/(95) sy-uline.
 LOOP AT jtab.
 SELECT SINGLE * FROM modsapt
 WHERE sprsl = sy-langu AND
 name = jtab-obj_name.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 WRITE:/1 sy-vline,
 2 jtab-obj_name HOTSPOT ON,
 21 sy-vline ,
 22 modsapt-modtext,
 95 sy-vline.
 ENDLOOP.
 WRITE:/(95) sy-uline.
 DESCRIBE TABLE jtab.
 SKIP.
 FORMAT COLOR COL_TOTAL INTENSIFIED ON.
 WRITE:/ 'No of Exits:' , sy-tfill.
 ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(95) 'No User Exit exists'.
 ENDIF.
ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
plz reward points if helpful or if it solves ur query.
Thanks
Chinmay

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How do we handle User exits in XML Publisher

Hi,
Can anyone tell me how do we handle user exits in XML Publisher ?
Thanks,
Kiran.

Do tyou mean the original Oracle Reports user exits ?
If so then the flexfield ones are handled in the data template, check the user guide. Format currency should be called in the template layer. You do not need srw.init with data templates.
Regards, Tim

How to use a user defined function in XI

Hi Experts,
I would like learn how to use a user defined function in Xi during mapping . Is there any step by step on that.
Besides during when me make communcaton channels I see the following tabs...Paramters ..Identifiers ...Module...
The module that is given here ...where and how it is used.

Hi,
You can write UDFs in java in Graphical mapping to enhance your XI Graphical mapping functionality
The steps for doing it would be:
1. Click on Create New function Button found on Bottom left corner on your XI Mapping window.
2. Write your java code.
3. Run the Mapping Test as usual.
>>The module that is given here ...where and how it is used.
The adapters in the Adapter Framework convert XI messages to the protocols of connected external systems and the other way around. When doing so, some
functionality might need to be added specific to a situation which is possible with the use of custom modules.
Typical example would be validation of file content when using a File Adapter or modification of the message payload to a common content structure which is not supported by any of the standard SAP modules.
An Adapter module is developed as an Enterprise Java Bean and is called locally by the Adapter.
An example on modules :
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/da5675d1-0301-0010-9584-f6cb18c04805">How to develop a module for reading file name in a sender file adapter XI 3.0</a>
Cheers,
Chandra

Can we add additional fields in work center creation using any user exit ?

Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiran

hi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran

As01 transaction using substitution user exit populate classificaion

Hi all,
I have a requirement, where in using the substitution user exit rule U210, I need to populate fields ANLB-NDPER, ANLB-NDJAR and ALNA-VMGLI from the values maintained in Ztable.
I am able to overwrite the SAP standard values for the fields ANLB-NDPER and ANLB-NDJAR. But not able to populate the filed VMGLI(Classification key).
For some asset classes, the classification key is not mandatory and the user without giving the value in that field if save the transaction, then I need to populate the value of VMGLI with the ztable value.
The present rule U210 is not working for classification key.
Please suggest, is there any other user exit for the scenario where we can populate VBGLI field.
regards
Rajani Yeluri

In the user exit documentation, it doesn't say anything about this exit being used for validation, therefore, it probably shouldn't be used as a validation routine, especially if its not being trigger at every PAI.
FU EXIT_SAPLAISA_001
Short text
Assign Inventory Number
Functionality
Using this user exit, it is possible to assign an inventory number when you create a new asset master record.
Notes
In the user exit, it is absolutely forbidden to use a statement that leads to an update or removal of database changes. Examples of such statements are:
'Commit Work' , 'Rollback Work' or call of function module 'DB_COMMIT'.
Parameter
I_ANLA
E_INVNR
Exceptions
Function group
XAIS
Regards,
Rich Heilman

How to use/activate user exits

Similar Messages

Maybe you are looking for