How to use Adaptive WebService Model with CAF WebService and Complex Type

Hi All,
I am trying to use the Adaptive Web Service Model and call a WebService generated by the CAF. The return type of the WebService is a Complex Type.. I receive an exception when trying to instantiate the Model Node.
Does anybody know how to use the Adpative Web Service Model with CAF WebServices and Complex Types as return type?
Help is appreciated..
Thanks, Johannes

Thanks Mukesh.
It is not possible to apply the Service Controller Template on Enterprise Java Bean Models as described in the Document. When I try to aply the template on the EJB Model, NWDS says: Only Webservice Models and RFC Models are supported...???
I did not find any information about how to return complex types in AWS.. in this document???
Is there such information available? Has anybody ever done that? There must be a way to do that.. Is is the standard approach, isn't it...? Please help me out there.. I need to get this running..
Thanks, Johannes

Similar Messages

How to use a menu model with a dynamic region and a task flow parameter

I am using JDeveloper/ADF 11.1.2.1
I have a menu model that changes which task flow is displayed in a given dynamic region using a backing bean. That works fine. I would like to be able to pass parameters to that task flow based on which menu item is clicked. For example: i have a task flow which shows a page where input fields are used to filter a table. Depending on the value of the task flow parameter I want to change which input fields are displayed. So i will have multiple menu items which refer to the same task flow but have a different set of parameters. I have tried using request scope variables and setting them in the backing bean for the dynamic region which works until the query is submitted at which point the request scope has changed and the value is no longer available. I have tried a number of other 'creative' approaches but have not gotten anything to work. Anyone done this before? Or have an idea on how to solve it?

Frank,
I did a fair bit of digging based on your suggestions and some things I found in your Oracle Fusion Developer's Guide book and I came up with something that works really well. It is fairly elegant but requires code. It would be nice if something like a setPropertyListener could be rolled into the menu model. That would make my solution completely declarative.
Here is my solution:
My task flow requires a the value #{pageFlowScope.type} to be set. My application has a dynamic region that is changed on the fly using a menu model. The region uses a backing bean (mainRegionManagerBean) which is in the viewScope to manage what taskflow is shown in the region. There are multiple menu items in the menu model that point to the same task flow but pass different values to the #{pageFlowScope.type} parameter. So i wired the menu items up to different methods in the mainRegionManagerBean which set the value for me. See the relevant code below.
I would be very interested in the feedback from someone with more experience than I on my solution. Maybe there is a more elegant way...
In the backing bean there is a primary method that was created by generating a dynamic region link which sets the task flow id and then other methods which call it and set the relevant parameters. (JSFUtils is a helper class i wrote to centralize some common tasks):
public String shipmentTraceMasterTaskflow()
taskFlowId = "/WEB-INF/taskflow/master/shipmentTraceMasterTaskflow.xml#shipmentTraceMasterTaskflow";
JSFUtils.setValue("pageFlowScope.type", "");
return null;
public String shipmentTraceProNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "pronumber");
return null;
public String shipmentTraceBOLNumber()
shipmentTraceMasterTaskflow();
JSFUtils.setValue("pageFlowScope.type", "bolnumber");
return null;
In the menu model (notice that these reference the different methods from above):
<itemNode id="itemNode_ProNumberTrace" label="ProNumber Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceProNumber}" focusViewId=""/>
<itemNode id="itemNode_BOLNumberTrace" label="BOL Number Trace" action="#{viewScope.mainRegionManagerBean.shipmentTraceBOLNumber}" focusViewId=""/>
On the page:
<af:region value="#{bindings.dynamicRegion1.regionModel}" id="r1"/>
In the pagedef:
<taskFlow id="dynamicRegion1" taskFlowId="${viewScope.mainRegionManagerBean.dynamicTaskFlowId}" activation="deferred" xmlns="http://xmlns.oracle.com/adf/controller/binding" Refresh="ifNeeded">
<parameters>
<parameter id="type" value="#{pageFlowScope.type}"/>
</parameters>
</taskFlow>
Edited by: Adam Stortz on Nov 22, 2011 11:10 AM

How i use my Ipod nano with my pc and itunes?

Hi I've been haveing problems with my ipod i just bought yesterday and i cant find out how to use i have to use my moms labtop becuse its only one that works with my ipod so if some one can give me a link or what ever i need for this thing ill be very happy thanks.

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are new to the iPod you might want to have a look at this page:
iPod nano Fast Start: The New User's Guide to iPod nano

How to use a Wifi connection with a Bluetooth and BB Curve 8320 with a laptop.

Hello All from Paris - France-
First soory for my poor english writing.
My question is simply, I already use my BB Curve 8320 as a modem.
But what I'm looking is to use my BB Curve 8320 by Bluetooth and use my WIFI connection.
I did many search but all resultats is using the "modem provider" and not Wifi connection.
In advance many thanks and regards.
Jean-Achille

Please go to the wireless tab for all the information you need. Click the link below for instructions. Let us know how it goes.
Checking the Wireless Settings on a Linksys Router
Connecting a Wireless Computer to go Online Using a Linksys Router

How to use multiple Simulink Models on on Target and One Host VI?

My ultimate goal is to run two Simulink models simultaneously from one Real Time Target PC from one LabVIEW VI. As I understand it, this is possible but I have not found a solution or example on how to do this. For debugging and demonstration purposes, I would also like to run the same setup on my windows machine. We have had SIT (and VeriStand) working with one Simulink Model for some time now. I have tried using the SIT connection manager and coping the code, but I have not had success doing this. We are using LV 2009 and Matlab 2009. Any thoughts or inputs would be appreciated. Thanks for your help.

Just dawned on me to try and open two instances of Matlab, then set the SIT server on the second instance of matlab to a different port. This worked as I got two different simulink models to run. The question is, is there a better more efficent way of doing this? Any thoughts would be welcome.

How to use an external display with Windows 7 and a Macbook Pro (Unibody)

I just set up my new Macbook Pro 15 inch with the Windows 7 beta, and noticed that I couldn't get the external monitor to be seen using Windows 7 only. I am using my Dell 30 inch monitor and it was only seeing the laptop's main display. The fix was to download the Nvidia video drivers for the 9 series (e.g. the GeForce 9600/9400), after which it was maically able to see the display.
The driver can be found here. Enjoy.
http://www.nvidia.com/object/windows7overview.html

Does Aero work?
Maybe it will fix some of my problems:
http://discussions.apple.com/thread.jspa?threadID=2088220&tstart=0

How to get the disco model with all tables and fields ?

Hello !
I have to make a document showing all the tables and fields I have in my EUL ... This would be a good documentation for our company and our clients too !
I haven't find any ways to perform this directly from disco admin and I can't make a query using the EUL tables ...
Please Help ...

Hi,
I am assuming you are using Discoverer 4.1/4i. In the Oracle Home\Discvr4 directory contains an EUL4.eex file. Import this in Admin edition, and it will create a business area on your EUL. Then you can get details on the Folders and Items and use it to create reports....
Cheers
Deepak

How to set the tables parameter to a BAPI using adaptive RFC model

Hi,
I have a BAPI ZBAPI that has a tables parameter ZPernr of type ZTable with two elements pernr and name.
I used adaptive RFC model and created model classes for the BAPI.
My question how do i set list of pernr and name to the tables parameter in the webdynpro for java.
I have the following methods available
ZBAPI input = new ZBAPI();
1.ZTable table = new ZTable();
table.setPernr(pernr);
table.setname(name);
input.addZPernr(table);
how do i set the table parameter for multiple pernr and name
2.
add all the pernr and name to list and set that list to input in the following way
input.setZPernr(list) and list of typecom.sap.aii.proxy.framework.core. AbstractList
out of two methods mentioned which one is correct.
Please let me know the solution
Thanks
Bala Duvvuri

Hi Bala,
 In your code:
List pernrList = new ArrayList();
pernrList should be declared as the type of class HROBJECT ( The structure name in the model e.g. the node PERFWARN type is Zhrecmfm_002_Perfrat_Warning_Input )
Try this:
HROBJECT pernrList = new HROBJECT();
pernrList.setPernr(pernr);
input.setPernr_List(pernrList);
// call BAPI execute method
If you want to pass list of pernrs, you can pass in alternate way
IPrivate<viewname>.I<nodeame>Node prNode = wdContext.node<node>();
IPrivate<viewname>.I<nodeame>Element prEle;
for (int i = 0; i < table.size(); i++) {
HROBJECT pernrList = new HROBJECT();
pernrList.setPernr(pernr); // Set the pernr from current record
prEle = prNode.create<nodeame>Element(pernrList);
prNode.addElement(prEle);
// call BAPI execute method
Once I execute the BAPI how do i iterate thru second table parameter PERNR_PERFRAT to get pernr and performance rating text
Say your node name is PERNR_PERFRAT
for (int i = 0; i < wdContext.nodePERNR_PERFRAT().size(); i++) {
wdContext.nodePERNR_PERFRAT().getPERNR_PERFRATElementAt(i).getPernr();
wdContext.nodePERNR_PERFRAT().getPERNR_PERFRATElementAt(i).getPerfrat();
Regards,
Siva

Problem in displaying a field in webdynpro using Adaptive RFC model

HI,
I created a webdynpro application using adaptive RFC model and i have a problem in displaying one of the output fields.
When i execute the function module it is giving the exact value for my output field in this case telephone number (of type STEXT which is char with length 40).But when i am trying to display that telephone number in webdynpro application it is taking only first 4 digits.
i deleted the model and recreated it still it doesnot work.
please let me know how to resolve it.
points will be awarded for sure
Bala

Hi Bala,
Whenever you reimport the model server restart is necessary otherwise the changes will not get reflected. You will get an error when you deploy the application.There is no go around except restarting the server as the meta data gets cached in the server as long as the server is runnig.So, Once you restart the server the cache will be cleared.
Check once again whether you are fetching data from correct BAPI field. Still problem persist try debugging.
Regards, Suresh KB

Error while using Adaptive RFC model

I am using adaptive RFC model to consume a function module from BI system. The function module expects a Boolean input. While executing the function module we need to give u2018Xu2019 for that input. When I consumed the function module in the webynpro java project , used it and give the input as u2018trueu2019 on runnig the application it gives the following error: u201Ccom.sap.conn.jco.ConversionException: (122) JCO_ERROR_CONVERSION: Cannot convert a value from type java.lang.Object to CHAR at field I_READ_ATTRu201D
There is corresponding dictionary type created called u2018BOOLE_Du2019 but I could not access the dictionary type in the controller java file.
Is there a way to rectify the same or any workaround condition?
With regards,
Sougato.

Hi saurabh,
I need to give the value from webdynpro. Hers is the sample code.
rssem_Cha_Values_Get_Input.setI_Read_Attr();
// It expects a boolean value but if i pass a value to the method the obove error is show.
Where as there is a simple type "Boole_d" generated when i consumed the RFC in the webdynpro.
but i couldn't access this simple type in the code.
With regards,
Sougato.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to use a iPad mini with a projector

How to use a iPad mini with a projector

Use an AirPlay compatible device, such as an AppleTV or an AirPlay compatible AVR.

How to use Adaptive WebService Model with CAF WebService and Complex Type

Similar Messages

Maybe you are looking for