How to use adifferent Show form to display a document created by XML forms

Hi,
I have created some XML documents using an XML form.
The XML form contains two Show forms, Show & Show2. The default is Show. When I view the XML document via a KM Docs iView the default Show form is used to display the resource.
If I wish to display the XML document using a KM Docs iView, but using the Show2 (non-default) form how is this done?
I have created Layout Sets for each of the different ways to display the XML forms, but there is no option to choose Layout Set in the KM Docs iView config.
Thanks,
  Tom
Edited by: Tom Parle on Apr 3, 2008 12:45 PM

Hi Tom,
Check out the SAP Help site [Linking Your Own List Forms into iViews|http://help.sap.com/saphelp_nw04s/helpdata/en/0e/1affa0f8c47447a164998b60025aea/frameset.htm]
I think it explains exactly what you are looking for.
Hope it helps,
Robert

Similar Messages

  • How to display attached file size in XML Forms

    Hi,
    I've created a XML form to store presentations general information like author, subject, summary and a RID field pointing to the ppt file itself.
    I'd like to show the size of the ppt file but I don't know how... Any ideas?
    When I use default:size property, the size showed is the XML size, not the ppt size.
    thanks,
    Marcelo

    Hello Sudip,
    Which is the JRE version which you are using ? Check this SAP note 1341069, which specifies that the properties will not load when JRE 1.6 is used. (Try 1.4 or 1.5 )
    For author field try giving caption $sap_user, and schema reference, creator. For created which is date try giving /Properties/default:created, and /Properties/default:createdby for created by.
    Regards,
    Vinod

  • Hi, I've checked how to use kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. For eg, Preetiya taatanige nimma muddu mommagalu maduva namaskara? How to write this?

    Hi, I've checked how to use Kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. I know how to change between the keyboards and can also view keyboard. However, For eg, 'Preetiya taatanige nimma muddu mommagalu maduva namaskara' How to write this? If anybody can answer this, very much appreciated.
    Thanks in advance for your reply.

    In general, you need to use the "f" (kannada qwerty keyboard) or "d" key (kannada) between letters to make special forms.  Also you may need to adjust the typography settings of the font, which is done by doing Format > Font > Show Fonts > Gear Wheel > Typography as shown below.  If you can provide screenshots or more detailed info on things you cannot make, I can perhaps help.
    It is important to note that MS Word for Mac does not support Indic scripts -- any other app should work OK.

  • Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

    Hi 
    Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
    The second source has a huge list of company names that can be narrrow by email work. 
    background:SP 2010 and Infopath 2010
    CRISTINA&amp MICROSOFT Forum

    I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
    http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
    Regarding filtering dropdown list then this could be done by applying form on-load rules. 
    Hope this helps

  • How to create a XML Form with confirmation Page

    Hi!
    I need to create a XML Form that have a confirmation page to enter de data and save it (into XML file).
    It's possible to make it with the XML Forms Builder, or I need to make it manual at xml & xsl??
    (Sorry about my poor english!)

    Hi Ernesto,
    there is currently no confirmation message available in the XMLForms EditForm. But you can use the "preview" button to show how it looks like, before you are using the "Save" button.
    Regards
    --Matthias

  • How to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum();

    Hi All,
    Any one know how to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum() ?
    Thank you.

    Do you ave some documentation about that dll?
    Have you looked into dll properties searching for vendor name? Maybe you can look int vendorìs site and obtain some help.
    Ultimately: are you forced to use that dll or can you use any software to calculate the checksum? There are several CRCs that you can use: provided you know which is the type used you could find an algorithm to calculate the CRC and check an existing one.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Can we include a Document into a XML Form

    Hi!
    If I want to attach a document into a XML Form is posible?
    i.e an Excell Document.
    Thanx in Advanced!
    Gerardo J

    Hi Gerardo,
    The info it's on my brain, jejeje, I have some experience with XML Forms. I really don't think you can attach (by standard/default) anything to an xml form, everything is a refence (even images).
    XML Forms generates xml files, witch are rendered thru layouts and the configuration you set in the RenderList and Show forms.
    Unless you find some kind of deployment that unifies the xml document with the file you want you will have to work with the references (link).
    Best Regards,
    Jorge M.

  • Getting started with create dynamic XML forms

    I work for a software vendor that is developing a C#.Net data entry system designed to replace a paper process.  The original forms come from a 3rd party and are paper form, such as a tax form, loan application form, etc.  The goal is to be able to enter data on the screen in a form that looks like something like the original form and then to print out the form that looks identical to the form on the screen.
    The system is designed to allow the end user to create the forms.  The process is that the end user creates the fields in the C#.Net application, then pick from those fields to build the form. During data entry, the fields are both pre populated by the C#.Net application and the results are saved back to the C#.Net application.
    The data entry and print all needs to be embedded into the core C#.Net application and NOT rely on any outside systems like the LifeCycle system.
    Is there some way to embed PDF creation in the C#.Net application (or in a traditional C/C++ application for that matter)?  I am under the impression that is what dynamic XML forms is all about.  Is dynamic XML forms an Adobe thing or an open standard?

    You are funny  I clearly state that I do *NOT* want to use LiveCycle Designer and you go tell me to post a question in that forum  Hopefully someone else will come along which can actually address my questions

  • How to use the separate symbol in the text field in the adobe form.

    Hi,experts,
    I don’t know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
    Action:
    1. config the ADS successfully.
    2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
    3. create a WDA for invoke the form and transfer the 'remark' context data.
    I use the following codes to display the paragraph in the PDF document:
    CONCATENATE
    '1、aaaaaaaaaaa；'
    '2、bbbbbbbbb '
    '3、ccccccccccc'
    '4、ddddddddd'
    INTO remark .
    lo_nd_z_hr_php_payslip->set_attribute(
    EXPORTING
    name = `REMARK`
    value = remark ).
    But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
    Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
    My email is : [email protected]
    Best regards,
    Tao
    Edited by: wang tao on Apr 8, 2008 1:58 AM

    Hi,
    If it is just a one word value then you could use this in the exist event;
    this.rawValue    
    = util.printx(">?<*",this.rawValue);
    This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
    If you wanted something more general ... if they could also enter a middle name then you could call a function like;
    function        toTitleCase(textValue)
      return  textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
    This uses a regex to change all lowercase letters following a word boundary to uppercase.
    Bruce

  • How to make use of the XFList in the Function Bar  of the XML Form Builder?

    Hello:
        Now I am creating blog using the XML Form Builder.
        In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
        I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
    lexian
    Thanks a lot!

    In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
    SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
    The first text box under Groups attribute corresponds to SCREEN-GROUP1,
    2nd text box for SCREEN-GROUP2
    3rd text box for SCREEN-GROUP3
    4th text box for SCREEN-GROUP4
    Hope this helps.
    Thanks,
    Balaji

  • How to use MacBook Screen as a Display from other VGA device?

    I have a MacBook Pro. Is there a finest way to use my MacBook Screen to display the contents from the another Computer's (or) Projector's "VGA Output" please?
    And by using some particular capture device and cables, will the port on MacBook be:
    - through USB?
    - through Thunder Bolt?
    Any suggestion please.

    https://discussions.apple.com/docs/DOC-6351

  • How to use Essbase @RETURN function to displayed messages in 11.1.2.1

    Hi,
    I found Business Rule support Essbase @RETURN function in Hyperion Planning 11.1.2.1 new feature.
    If I create a simple BR for planning app as below:
    "@RETURN("test return message" , WARNING);"
    The validation returns error and BR can not be deployed.
    Does any one how to use @RETURN function in BR?
    Thanks!

    Hi,
    From Essbase Technical Reference Guide: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
    Example+
    The following example stops the calculation and returns a custom warning message if maximum values specified in the IF statement are empty:+
    FIX("Actual")
    . "Profit"(
    IF( ("Marketing" < 0) OR ("Payroll" < 0) OR ("Misc" < 0) )
    @RETURN( @CONCATENATE(
    @CONCATENATE("The violation of data integrity : Market [", @NAME(@CURRMBR("Market"))),
    "] has a negative expenses. Calculations are interrupted")
    , WARNING);
    ELSE
    "Profit" = ("Margin" - "Total Expenses")*0.9;
    ENDIF
    ENDFIX
    Cheers,
    Alp

  • Store and display word document in database through forms

    how can i store a word document in database through forms 6i or 10g, and display it through forms from database.
    i know how to store a binary file in database through DBMS_LOB package, but i want to do it throug forms. is it possible?
    regards

    Hi Alex
    "Create a datablock and specify the item datatype as blob"
    BUT: How to bring the document to the blob?
    Hi user 611..
    Warning: It is easy if you use an OLE-Object - but OLE is a special format. The result will not be the same as with dbms_LOB.
    We have a application with documents stored via OLE - terrible!
    OLE is no longer supported by forms 10. But webutil would help.
    I asked a similar question and got a good answer:
    OLE-Container and migration to the web
    Wolfram

  • How to change dateformat of VALID FROM and VALID TO properties in xml forms

    Hi all,
                I have created a news using xml form bulider and i have given lifetime for that news ,also displaying the VALID FROM and VALID TO  in news.By default it is in mm.dd.yyyy format but i need to display the dateformat as dd.mm.yyyy in show form.Is there any possiblity to change the format in XSLT or any other solutions.
    Regards
    Bala

    Hi Bala
    Check this XML FORMS - Date Format.
    Its a quite easy way.
    Regards
    BP

  • Using  cl_gui_textedit, text blocks always display prior document.

    We have two containers and we're using two instances of cl_gui_textedit.
    On the first call to the text screen, we see the two texts that we should see.
    The user saves the data and backs out to the selection screen, which contains an ALV display of documents. 
    The user selects the next document to process.  During initialization, we attempt the FREE destructor but it does not destroy the text editor ref to cl_gui_textedit.  We can initialize with clear and free as ABAP statement.  Upon entry to the PBO, we can see that we have forcibly cleared the ref to cl_gui_textedit.  It's 0: INITIAL for both text editors.  We watch the table being built and the internal tables contain the correct text.   After our set read_only true or false, we get a beep, and then arrive at our text screen without any error message.
    What is on the screen at that point will be the texts from the prior document.  We've tried inserting lifetime parameters for our custom container.  We've tried CALL METHOD cl_gui_cfw=>flush (which appears to always be necessary in PAI when we get the unprotected portion and the indices, etc.).  Neither of these alter the behavior of the screen and the erroneous content of the text editor blocks.
    Question:  is there a method or something that anyone can suggest to "force" the text blocks to contain the data that was in the table, rather than the data that was in the table for the prior transaction?

    Did you try calling the method DELETE_TEXT of the CL_GUI_TEXTEDIT before setting up the next text.
    This is how I get rid of the existing text:
    * Delete the Text
      me->o_editor->delete_text( ).
    * Set the new text
      me->o_editor->set_textstream( EXPORTING text = iv_text ).
    Regards,
    Naimesh Patel

Maybe you are looking for