How to use "Adjustment Level " in automatic adjustments rule

Now we are setting up BPC for legal consolidation.
we use BPC 7.0MS SP4 Version.
I want to use some result of automatic adjustment rules for source data, so I tried to use adjustment level in automatic adjustments rules.
I was setting up A rule's (to use source data) adjustment level is 0 and B rule's level is 1,
the result of SPRUNCONSO were "Error" CSD-150 and CSD-160.
Please let me know how to use adjustment level option.
Thanks.
Edited by: tae-youn.kim on Dec 14, 2009 3:20 AM

Hello :
CSD-150
Check the method between METHOD Table and your ownership Cube. Check your Rules between the RULES Table and The ELIM Table. Check The INTCo.
Regards,
SANJAY

Similar Messages

How to block top-level domain names in rules for EOP?

Using EOP for email filtering to/from our on-premise Exchange server. How do I block entire top-level domains in the rules section under mail flow? For example, w need everything ending with .link blocked. Right now I
have only been able to block email addresses and full domain names. I know I can setup a transport rule in our exchange, but I'd prefer EOP handle this before like it should. Thanks in advance.

If you're using EOP and your goal is to block stuff coming from a certain geographic area then you need to go to your exchange admin center select Protection>content filter>Default Policy>International Spam>Filter email messages sent from the
following countries or regions

How to use Item Level security

I am working on portal 9.0.2.6.18.
I have a folder with 1000 items. I want to grant groupA
access to 997 items and
(Group B,GroupA) access to 3 items.
How do i do this.
Here is what i tried:
1.enabled item level security on folder
2.granted folder level access to groupA and groupB
3.Changed access of 997 items to grant access to GroupA
4.Did nothing to the 3 items which i wanted to give access to GroupA,GroupB
Is there a better way of achieving this?
I am not really comfortable granting folder level access to groupB, because if i miss overwriting privileges of an item (in step 3), then groupB will have access to that item. I would love to change just 3 items because they are the exception.
How is this feature supposed to be used?
Thanks
Harish

Martin,
Thanks for the reply. I just cited 1000 items folder as an example. We have various complex combination of security requirements for folders and items. So creating sub-folders for each combination will not work for me.
Everytime the security requirements change we have to move the items around, which can confuse users. And sometimes we have to create sub-folders to workaround the item-level security problems even when there is no logical business classification to a set of items.
Harish

How to use 2 level tabs? especially parent tab

Hi all.
I use APEX 4.0 and theme 17 Sapphire.
I have two pages: A , B.
When I run page A,I want to show it like this:
||Parent Tab1||Parent Tab2||
||tab1||
When I run page B,I want to show it like this:
||Parent Tab1||Parent Tab2||
||tab2||
tab1 belongs to Parent Tab1, tab2 belongs to Parent Tab2. Show the parent tab all the time.
But now When I run page B. the parent tab disappears. Why?
I check the two pages in Tree View. I find differences in the Shared Componts -> Parent Tabs area. Page A's Tab Set is main and has two parent tabs. But B's Tab Set is the one I created and just has one parent tab. So how to change it?
Steps are the best.
Thank you all.
The second question is how to beatify parent tabs?
Edited by: AndyChou on Feb 28, 2011 5:45 PM

Hello -
http://proskudin.blogspot.com/2007/06/two-level-tabs.html check out this blog. This is what I used to help me understand two level tabs. It is actually quite a good reference.
Austin

Rule Author-How to use own JSP screen instead of Rule Author Customization

hi' I am using Oracle Business Rules and creating Rule Repository using Rule Author however
I want to use my own JSP screen for customization of Rules instead of using Rule Author customization screen.
please tell me how to do this.
thanks
Yatan
Edited by: Yatanveer Singh on Jan 29, 2009 5:19 AM

oracle provides API to edit rule repository programmatically. To use your custom JSP pages you need to write your wrapper classes over following oracle rule API classes:
oracle.rules.sdk.editor.ruleset.Rule
oracle.rules.sdk.editor.ruleset.RuleSet
oracle.rules.sdk.editor.ruleset.Action;
oracle.rules.sdk.editor.ruleset.AdvancedExpression;
oracle.rules.sdk.editor.ruleset.Expression;
oracle.rules.sdk.editor.ruleset.Pattern;
oracle.rules.sdk.editor.ruleset.SimpleTest
Once you create wrapper you can use them as pojos to build your custom rule author screen.

How to use create & ruleExecutionSet in oracle business rules

I am trying to run the demo example of oracle business rule (car demo) using
ruleExecutionSet.
What are the changes thet i have to made in example in order to create & use the ruleExecutionSet to run the car demo .
with regards
saleem khan

you are in the Oracle Forms Forum and your question is related to JDeveloper and Crystal Reports, you think those two are linked to Oracle Forms in anyway??
Please post your questions in the appropriate Forum.
Tony

How to implement row level security?

Hi all,
There is a database which is for 3 companies to use it and how to use row level security to make sure that they can only manipluate their own data? For example, "employee" table, for each company they just can see their own employees information. How to use dynamic view to do it?
Many Thanks
Amy

Here are two options to achieve what you want.
A. You can do this by coding, that's if you are ready to. Are you? If yes then try the steps below:
1. create a security codes table. Say for example
001 - company a
002 - company b
2. create a security table that will list all users and which company they should have access to. You can also implement this by roles.
3. alter all tables in the application schema to add a security code column. This will be a foreign key reference to table created in 1 above.
4. update all data in the tables according to which company they belong to.
5. write a procedure or package that does a validity check whenever a user requests for data. This procedure/package determines which company data the user has access/rights to.
With this, you should be able to achieve what you want if you do not want to spend on VPD and FGAC. The problem comes where there are users who would have cross access to data from both companies. In this regard, then you have to modify your security table a little bit to handle this.
B. This option i will admit is not so clean. You can also achieve this by two different views for every table in the application schema. And on each of these views, create a private synonym for every user. For illustration purposes:
Table name = Employee.
Create a view employee_a on employee
create a view employee_b on employee
Let's say you have users x and y. X has access to employees of company a and y has access to employees of company b. You can now create private synonyms for each of these users as follows:
create synonym employee on employee_a in x schema.
create synonym employee on employee_b on y schema.
This i have not tried but believe should work.
Hope one of these options serve your purpose.

JClient/ADF How to use JCLoginDialog to change user

Hi,
can anyone give me a clue how to use JCLoginDialog that is automatically generated during design time ?
I`d like also to add there database name and sid to change also database not only user during run-time.
thx in advance,
Jacek

i,
JCLogin Dialog is a JAAS based authentication dialog that doesn't perform database authentication or connection. We are workin on a whitepaper explaining what needs to be done to write a database login screen instead
Frank

HT5569 i don't know how to use my 3g on my iPhone 4 how do i turn it on an use it.

Need to use 3g because i am out alot and i dont know how to turn on the 3g and i dont know how to use it.

3G is a speed of cellular data connection. To turn on cellular data, go to Settings > Cellular and set Cellular Data to on (green). Immediately below that setting, there may be an additional setting for 3G or LTE depending on your phone/carrier. That second setting allows your phone to use the fastest cellular data available -- if it is available at the location you are attempting to use it.
Regarding, how you use it -- it is automatic once the above settings are made and will be used whenever anything on your phone needs to get data over the cellular network (e.g., when you use Safari, check the weather, use any app that needs to retirieve data via the internet).

Automatic adjustments - Adjustment level not working

Hi all
I have got some basic consolidation rules using the rules tables but as soon as i try and control the order in which the rules are executed using the Automatic adjustments - Adjustment level field, the stored procedure produces the error below:
Any help would be appreciated
Byron
TOTAL STEPS 1
1. Execute formulas: Failed in 6 sec.
2. Legal Consolidation: completed in 6 sec.
[Selection]
(Member Selection)
Category: ACTUAL
Time: 2010.P16
ConsoScope: C_ENGEN
[Messages]
Execute formulasError
SPRunConso Version 7.0.116
Warning : Nothing Extract From Ownership for OPENING Period
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
*ERROR* CSD-150 Problem extracting Data : C_REPART
*ERROR* CSD-160 Problem extracting Data : C_CONSO
10000015 - 2498 Rows Calculated
10000015 - 0 Rows Updated

Hi Nilanjan
I have 2 rules in the Automatic adjustments table:
In short, Rule 1 should be executed first as Rule 2 should be based on the results of rule 1.
Rule 1: Non Group part cancellation for Proportionate units
Adjustment level = 0
Adjustment type = Proportional
Rule 2: Inter-company elimination
Here the adjustment level = 1
Adjustment type = Generic
When i run the following stored procedure:
*RUN_STORED_PROCEDURE = SPRUNCONSO(%APP%, %CATEGORY_SET%,%CONSOSCOPE_SET%, %SCOPETABLE%,%LOGTABLE%)
The correct results are posted but the package displays as failed with the error message as per the first message in this thread.
The help states the following, which is exactly what i need:
Adjustment level
This field must contain an integer value ranging from 0 to 99 and can be used to order the sequence of execution of the various ELIM rules, if desired.

How do I adjust the levels of multiple images at once?

CS6 user, I recently scanned a few pages of an old black and white comic, which thanks to the passage of time are now more black and beige.
I know how to adjust levels using the eyedropper tool but is there a way to apply the same effect to several images in one go (i.e. adjust the levels of one image then apply the same effect to the others as a batch of files), rather than pressing ctrl+alt+l and saving each image individually?
Thanks

You can also select all of the images in bridge, go to Tools, Photoshop, Load files into layers. Then select all layers, put them into a group (Cmd G), add layer mask to the group and do the levels there.

Extending useful life without automatic adjustments

Our Assets department would like to extend the original and remaining life of all assets but DO NOT want the system to automatically adjust depreciation; they want to adjust this manually somehow.
Is a change in useful life without automatic adjustments possible? The only thing I could think of is to temporarily change the GL account that is assigned for depreciation so at least all the adjustments would be gathered in different GL accounts for prior periods so the changes can be dealt with manually.

Hi,
you could change to a depreciation method which would NOT consider the useful life of the asset, such as stated percentage rate, or manual depreciation.
If your depreciation method is based on useful life (or remaining useful life) this would be contradictive if it wouldn´t change / be adjusted.
Regards,
Markus

How to Use Transient View Objects to Store Session-level Global Variables

hi
Please consider section "40.8.5 How to Use Transient View Objects to Store Session-level Global Variables"
at http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcstatemgmt.htm#ADFFD19610
Based on this documentation I created the example application
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.01.zip
It behaves as show in the screencast at http://screencast.com/t/qDvSQCgpvYdd
Its Application Module has a Transient View Object instance "MyEmployeesContextVOVI", as master for the child View Object instance "EmpInCtxJobVI".
On rollback the Transient View Object instance keeps its row and attribute values.
Also when passivation and activation is forced (using jbo.ampool.doampooling=false ) the Transient View Object instance seems to keep its row and attribute values.
questions:
- (q1) Why does the expression #{bindings.MyEmployeesContextVOVIIterator.dataControl.transactionDirty} evaluate as true when a Transient View Object instance attribute value is changed (as shown in screencast at http://screencast.com/t/qDvSQCgpvYdd )?
- (q2) What would be a robust approach to make a Transient View Object instance more self-contained, and manage itself to have only one single row (per instance) at all times (and as such removing the dependency on the Application Module prepareSession() as documented in "5. Create an empty row in the view object when a new user begins using the application module.")?
many thanks
Jan Vervecken

Thanks for your reply Frank.
q1) Does sample 90 help ? http://blogs.oracle.com/smuenchadf/examples/
Yes, the sample from Steve Muench does help, "90. Avoiding Dirtying the ADF Model Transaction When Transient Attributes are Set [10.1.3] "
at http://blogs.oracle.com/smuenchadf/examples/#90
It does point out a difference in marking transactions dirty by different layers of the framework, "... When any attribute's value is changed through an ADFM binding, the ADFM-layer transaction is marked as dirty. ...".
This can be illustrate with a small change in the example application
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.02.zip
It now shows the result of both these expressions on the page ...
#{bindings.MyEmployeesContextVOVIIterator.dataControl.transactionDirty}
#{bindings.MyEmployeesContextVOVIIterator.dataControl.dataProvider.transaction.dirty}... where one can be true and the other false respectively.
See also the screencast at http://screencast.com/t/k8vgNqdKgD
Similar to the sample from Steve Muench, another modification to the example application introduces MyCustomADFBCDataControl
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.03.zip
public class MyCustomADFBCDataControl
extends JUApplication
@Override
public void setTransactionModified()
    ApplicationModule vApplicationModule = (ApplicationModule)getDataProvider();
    Transaction vTransaction = vApplicationModule.getTransaction();
    if (vTransaction.isDirty())
      super.setTransactionModified();
}Resulting in what seems to be more consistent/expected transaction (dirty) information,
see also the screencast at http://screencast.com/t/756yCs1L1
Any feedback on why the ADF Model layer is so eager to mark a transaction dirty is always welcome.
Currently, question (q2) remains.
regards
Jan

I want to know what's the conference call in community level and how to use it

i want to know what's the conference call in community level and how to use it

Welcome to Apple Support Communities
Conference calls are got when you reach level 4. Sometimes, ASC hosts may do a conference call about something related to Apple Support Communities. You will be notified through mail or through the "Using Apple Support Communities" forum.
The last community calls were only for level 6 and higher users, so it's possible that you don't get invited to any until you reach level 6

How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

Field name : PRREG
fcheck more details on f1 help...
check_group defines the checking procedure to be used for availability check in individual applications.
along with the checkg group, checking rule specifies the final procedure for chkg..
eg:
ST for stock transport order
AQ for SD order project srock
also chk this help doc.
http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
search the forum for sample code..
How to use BAPI_MATERIAL_AVAILABILITY Function Module....

How to use "Adjustment Level " in automatic adjustments rule

Similar Messages

Maybe you are looking for