How to use AE for wireless printing with Ethernet Printer?

Hi all,
I have been using my AE connected to a printer via USB for printing but have now replaced my printer with another model that only has Ethernet connections.
Can someone please explain how to set up the AE so that I can print? I can get so far but seem to be doing something wrong somewhere. Here's my setup:
Mix of Macs and PC's using Airport Time Capsule for wireless network. Currently setup as 'Create a Wireless Network'
1 x b/g Airport Express - now with Ethernet connection between AE and Printer. Currently connected as 'Join a Wireless Network'
Via 'Add Printer' I have selected 'Internet Printing Protocol - IPP' as the Protocol and added the IP address of the Airport Express '10.0.1.10' as the Address. This seems to connect OK but all I get is printer paused.
Any idea where I am going wrong please?
Many thanks, Mike

Sorry you are having difficulties.
Suggest that you first get the printer working with your AirPort Extreme in case the configuration on the Express may not be quite right.
I'm not familiar with the Epson products, but I do use an HP ethernet all-in-one device.
The basic "must do's" on the device include entering the printers MAC address and assigning a fixed IP address that the printer will always will receive using a DHCP Reservation on the AirPort Extreme. My all-in-one gets 10.0.1.25 It sounds like you may have done this.
After installing the printer software from the disc, you go into the Mac's System Preferencesj > Print and Fax and click the small + (plus) button at the bottom of the printer list. The HP printer appeared immediately as an available printer, so click it to highlight it and then click Add at the lower right. It's been flawless since it was installed about 3 months ago.
You'll need to Add the device for each Mac computer on the network. I don't use PC's but imagine that Add Printer or Add New Device would be the way to go here.
Sometimes it helps to call the manufacturer and endure the hold for 15-20 minutes waiting for the manufacturer's tech support people.

Similar Messages

  • How to use itunes for making video with software Studio

    How can I use my downloaded music files with my video making software?

    Purchased music from the iTUnes store is in a "AAC protected" format. It can only be used in iTUnes. Any music you buy online these days will have some protection on it where you can only use it in there program.
    The way around this is to burn the purchased songs to a CD in iTUnes. Then goto edit>preferences>advanced tab>Import sub tab and set your import settings to something like MP3.
    Now put the burned CD back in the PC and "Re"import it into iTunes so its imported in a MP3 format so you can use it in any program. Before importing it tho you need to manually add the name of the song, artist album ect ect

  • How to use AX1 for wireless audio and Time Capsule simultaneously?

    I am trying AirFoil to Stream Pandora (Safari) to an amplifier and speakers in the next room connected to an older Airport Express.
    I can play iTunes 11.0.1 (on a MacMini 2.26 GHz running 10.6.8) to this older Airport Express 802.11g (before N came out  - Is this called AX1st?) with the audio out the Express connected to my amplifier and speakers and wirelessly play my music. To do this I have to choose the Airport Express as my network device which means I loose my Time Capsule, which is the device with my internet connection.
    Can you tell me how to stay on the internet with Time Capsule and stream to this Airport Express?
    If I try to extend to this Airport Express I get an error message: "The Network You Selected cannot be extended." (I don't know if that is a "g" "n" thing or what?)
    Do I need a newer Airport Express, or a Netgear or how to get Pandora to an amplifier in a different room, wirelessly?  Then the question will be, how to do this to three different amplifiers in three different rooms.

    How do I
    Make your Express 'join' your Time Capsule's WiFi network in AirPort Utility. This will work wirelessly however your Express will not function as an extender in this mode.
    I'm Using Airport Utiity 5.6.1
    In AU in "Aiport / WIreless tab" I hoped it would be as simple as the word 'Join' showing in the Wireless Mode drop down. But it does not.

  • Using iphone 5 and 5c on ios7.0.4 and would like to use these on wireless only with no carrier service for voip apps.    how to i prevent the Iphone is not activated contact your carrier?

    Hi i am using iphone 5 and 5c on ios7.0.4 and would like to use these on wireless only with no carrier service for voip apps.    how to i prevent the error Iphone is not activated contact your carrier?

    tnguyen9 wrote:
    when i remove the sim card it gives me errors that there is no sim. 
    You should only need a SIM in it to actually activate it in iTunes.  Once activated, leave the SIM in or remove it, it should not matter.
    Then, turn on airplane mode.  And then, go into wifi settings and re-enable wifi (this leaves the cellular radio in airplane mode = powered off).
    Now your iPhone is effectively no more than a (wifi only) iPod Touch.

  • How do I use a previous email address with my printer?

    How do I use a previous email address with my printer?  I reset my printer and want to use the same email address as before.Thanks

    At this time the printer's email address will not be available for for re-use for 6 months. This is a security measure once an email has been disabled. After that time, one can go into their account and then change the customized email address for the printer. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?

    Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?

    Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • I have an IMAC that runs OS 10.6.7.  I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

    I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my  5200 modem directly up to my desktop , and the  network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
    I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
    Any suggestions?
    Thanks, Vicki

    Imac graphics fireware.
    Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
    As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
    cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

  • HT4623 How to use epson iprint after connected with iPad help

    How to use epson iprint after connected with iPad help.

    When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).

  • How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

    How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
    We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
    How can we remove @abc.com
    We are using OID 11g and OAM 11g
    Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
    We are in OID 11g.
    Any help on this greatly appreciated.

    I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
    Thanks,
    Hussein

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

  • How to use i for if condition in a for i in loop?

    Hi friends,
    I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
    cursor is
    select c1,c2,c3 from table1; -- 100 rows returned.
    open cursor
    loop
    fetch c1,c2,c3 into v1,v2,v3;
    for i in 1..3 loop
    if 'v'||i between 90 and 100 then
    v_grade := 'Excellent';
    elsif 'v'||i between 80 and 89 then
    elsif 'v'||i between 50 and 59 then
    end if;
    end loop;
    close cursor;
    This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
    But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
    Thanks for any advice in advance!

    user508774 wrote:
    Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
    So do not underestimate what can be done in SQL.
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
    SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
    The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
    These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
    Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
    Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
    Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
    The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
    Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
    To create a SQL program with parameters is done by using bind variables. Instead of
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    The following SQL source code should be created:
    v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
    The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
    The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
    In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
    UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
    Where v1 and the others are PL/SQL variables.
    That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
    The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

  • How to use the eventing and databag with a WAS 6.20 ?

    How to use the eventing and databag with a WAS 6.20 ?
    Is what there is a good guide for these services?
    Thank's

    In the raise event you can pass the value
    like below.
    <SCRIPT>
    function raiseEvt(value1){
    if(window.document.domain == window.location.hostname){
    if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
       EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
      // alert('tree domain'+document.domain);
    </SCRIPT>
    and in the
    subscribe event you can get the values like below.
    <script language="javascript">
    if(window.document.domain == window.location.hostname){
    document.domain = document.domain.substring(document.domain.indexOf('.')+1);
        EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
    function myreceiveEvent( eventObj ) {
          document.forms[0].gp_hidden.value = eventObj.dataObject;
    </script>
    Also look at the following link for a complete documentation.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
    Regards
    Raja

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

Maybe you are looking for