How to use aggregator to create a single swf file from multiple files

Hi everyone,
I am working on the client's requirement where i have to create a SCROM 2004 based video. Its basically a PPT inside the captivate file. And it has around 175 slides in the file. Some of the slides have animations, voiceover. I am facing a problem during PUBLISHING the file into single SWF file format. Whenever I Publish the slides as SWF, it creates number of SWF files, Swf skin of the player and other manifest, Scorm 2004 files.
I want only one single SWF file in which every slide should be incorporated in it. Dont know, why it is happening? I tried aggregator for this also, but it didnt worked... The Skin.swf has been easily added and no other files are adding. It shows me an error: "Name.swf is not a AS3 Captivate file ....."
I am new to this. Please help me out as I have a very short deadline for this.
Thanks and Regards

Maybe you misunderstand: this is a user forum, not online help by Adobe staff.
Sorry, but if you are that impatient, you'll have to pay for online support. You post a question and expect to have answers within minutes?
Lilybiri

Similar Messages

Creating single .swf file without border causes control bar jump

If the goal is creating a single .swf file and the answer is
to simply uncheck the border checkbox, there's a small problem. If
there is a Captivate control bar -- in my case a full length
stretched one -- it will ride up and over the Captivate movie,
covering some of the movie. In my case the control bar is riding up
and over several buttons referenced in the project, screwing things
up considerably.
How can we keep the control bar from riding up -- or more
specifically perhaps being loaded over top of the project -- such
that it obscures part of the project?
Quick answers would be really fantastic!
Thanks!

Thanks Paul,
That did work. I use a pretty stripped down control bar so
adding in 27 pixles works. A cohort mentioned that Captivate 1
required a similar work around -- though it only produced a single
file. It'd have been nice to have known before her co-worker.
It's too bad there's not some verbage somewhere -- maybe in
the help -- that explains that adding a control bar to an exisiting
project will result in the toolbar obscuring some of the project --
how much depending on the size of the control bar.
It'd be great to have a little checkbox that would allow the
project to expand the exact number of needed pixels so that the
project and control bar were nearly mated together.
To come full circle, after I've done this and gotten the two
together, I have to resize again -- this time down -- for my
project.
So after making it bigger to fit the control bar, I resize it
again to make it smaller, make adjustments to the text -- which
doesn't seem to scale -- and to the caption boxes that don't mate
exactly anymore and publish. What I found is that the file size is
now closer to the original "larger" project file.
I find this curious, as I was finding when the control bar
was on top of the project before learning this workaround that the
file size for a smaller resolution project was actually turning out
larger. That never made sense to me.
After the workaround, it's actually close to the same size.
Thanks for your help!

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?
Email has 3 attachments--some are not pdf. I'd like all three converted into pdf files along with the email itself, and all appear in the email's pdf portfolio.

I would also like an answer to this question.
I am trying to convert an Outlook email to a PDF, then all attachment are appended to the PDF as pages instead of attachments.

How to use SNRO to create daily number range?

Dear all,
I would like to know how to use SNRO to create a daily number range.
We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again. i.e. <8-digits date><2-digit sequence>
For example, today is 22 May 2006,
2006052201
2006052202
2006052203
Tomorrow will have sequence like this:
2006052301
2006052302
2006052303
Thanks!

Thomas,
I don't there is a automated way of doing as the dates do NOT follow a numbering sequence. What you can do is to create a number range for getting the last two digits every day and manually concatenate the date with the serial number.
However, as you have to reset the counter every day that might be a issue.
Regards,
Ravi

I was wondering how to use Dreamweaver to create joomla template? Any ideas or useful resources.

I am embarking on a new project to create a joomla template. I need your ideas on how to use Dreamweaver to create the template. TQ

It's pretty much the same procedure with all your open source CMSs (WordPress, Drupal, Joomla!...)
Start with this 4 Part Tutorial:
http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to use CSS to create horizontal nav bar in Dreamweaver CS6

How to use CSS to create horizontal nav bar in Dreamweaver CS6

One of the ways to do it is this: Tryit Editor v1.9
You can also use floats to get something to the same effect.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

How to publish a single SWF file?

Hello, I need to know how can I publish a single SWF file
(like the EXE option).
I've tryied to publish many times, but the Captivate creates
many SWF files, including the skin.swf file, but this one I know
how to remove.
I'm using Captivate 3.0.
Thank you!

Hi there
Given the date I'm sure it's something that got lost in translation during the forums upgrade.
See if the link below helps.
Click here
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file?

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file? If so, how?

You can automate Acrobat using IAC (InterApplication Communications), as documented in the Acrobat SDK. Your program could loop through a collection of PDFs, load them in Acrobat, extract the form data from each, and generate a CSV file that contains the data.
Acrobat can also do this with its "Merge Data Files into Spreadsheet" function, but this is a manual process.

How does the icon get created for a saved file

In my program I allow saving files using JFileChooser and ActionListener.
In the constructor of the main class which extends JFrame I also set an icon by saying:
this.setIconImage(new ImageIcon("image.jpg").getImage());
This does not only set an icon on the title bar and the minimized window, it also creates an icon on my saved files. However, the image quality for the icon on my saved files is bad, even though the image quality for the other icons is ok. The size of the icon image I am providing is close to the size of the icon image on my saved files.
How did the icon get created for my saved files? Is it possible to improve the image quality?
Thanks for looking at this!

I just realized that
this.setIconImage(new ImageIcon("image.jpg").getImage())
did not create the icon for my saved files.
So what did create it? I did not program it!
However, I happen to have an icon file Ananya.ico where I have my java project. I use if for my installation file. Did Java use this icon?
Please help! Thanks!

Creating single SWF file

Hi,
I have several mp3 files that I use in my Flash animation but I want to publish this animation as a single SWF file. Don't want the mp3 to be also made available along with the SWF. Can you please tell me how to do this ?
-Thanks

Since I am not sure if your question was about security, you can use Sound and SoundChannel classes to stream mp3s at runtime.This way you don't need to include these files with your SWF and sound stream is more controllable.
There are many tutorials on how to do that, inclusing Adobe documentation:
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/media/Sound.html
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/media/SoundChannel.htm l
As for the security, DRM is a big expensive thing that is not affordable for the majority of us. In addition, there are tons of free stream sniffers on the web that extract media very easily.

Captivate 7 - How to publish into a single swf file?

Our Authoring tool has been designed to cater for Captivat swf files for video uploads. Now that we have upgraded to Captivate 7 the swf - is merely a 'holden cache file' the video content is saved in the .mp4 file. Our programmer tells us that it will take some time to reprogramme this. Is there a way within the Captivate 7 publishing settings to still create a .swf file which will be able to stream the entire video content when uploaded or to generate a single swf file with all content?
Thank you so much! We are trying superfast to adapt to all the different changes and really appreciate you input.
Peter

OK, only solution I've found is to use a 3rd party program - try cutePDF.
Thanks for nothing HP!

Creating a single ear file for SOAP plus wsdl architecture

Hi team,
We are supporting an application which initially supported only SOAP RPC calls to connect to other applications via webmethods. Recently we have developed another module using .wsdl approach and have deployed this module separately using a separate ear file.
The details of the application are as below:
--> Application is developed in J2EE hence a J2EE container is required.
--> Oracle 10g v9.0.4.1 is being used
--> for database we have Oracle 9i RDBMS Enterprise Edition v9.2.0.6
--> The applicationn is developed in the ODC based on Solaris 9 / Oracle 9i and Oracle 10g AS v9.0.4.1.
--> Application and SOAP are deployed in the same Oracle 10g instance.
Now that we have 2 ear files deployed on the Oracle OC4J server , we are being pushed by business to deploy a single ear file to implement both the functionalities.
Please suggest if there are any Possibilities to create a single ear file to deploy such an application supporting both SOAP calls and wsdl approach. If we can, please assist. We do not want to make changes to the existing as-is soap calls and we also want to continue using the new module using the wsdl approach.
Please also suggest the possibilities of any conflict that could arise as a result of deploying a single ear?
Note: Incase any other inputs are required from our end, kindly let us know. Thanks
Regards
Vtx team
Edited by: 976223 on Dec 13, 2012 12:58 AM

Dear experts,
Please assist. Your suggestions would be very helpful in this regard.
Thanks

How to use for all entires clause while fetching data from archived tables

How to use for all entires clause while fetching data from archived tables using the FM
/PBS/SELECT_INTO_TABLE' .
I need to fetch data from an Archived table for all the entries in an internal table.
Kindly provide some inputs for the same.
thanks n Regards
Ramesh

Hi Ramesh,
I have a query regarding accessing archived data through PBS.
I have archived SAP FI data ( Object FI_DOCUMNT) using SAP standard process through TCODE : SARA.
Now please tell me can I acees this archived data through the PBS add on FM : '/PBS/SELECT_INTO_TABLE'.
Do I need to do something else to access data archived through SAP standard process ot not ? If yes, then please tell me as I am not able to get the data using the above FM.
The call to the above FM is as follows :
CALL FUNCTION '/PBS/SELECT_INTO_TABLE'
EXPORTING
    archiv           = 'CFI'
    OPTION           = ''
    tabname          = 'BKPF'
    SCHL1_NAME       = 'BELNR'
    SCHL1_VON        = belnr-low
    SCHL1_BIS        = belnr-low
    SCHL2_NAME       = 'GJAHR'
    SCHL2_VON        = GJAHR-LOW
    SCHL2_BIS        = GJAHR-LOW
    SCHL3_NAME       = 'BUKRS'
    SCHL3_VON        = bukrs-low
    SCHL3_BIS        = bukrs-low
SCHL4_NAME       =
SCHL4_VON        =
SCHL4_BIS        =
    CLR_ITAB         = 'X'
MAX_ZAHL         =
tables
    i_tabelle        = t_bkpf
SCHL1_IN         =
SCHL2_IN         =
SCHL3_IN         =
SCHL4_IN         =
EXCEPTIONS
   EOF              = 1
   OTHERS           = 2
   OTHERS           = 3
It gives me the following error :
Index for table not supported ! BKPF BELNR.
Please help ASAP.
Thnaks and Regards
Gurpreet Singh

HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?

How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...

hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect

How to use aggregator to create a single swf file from multiple files

Similar Messages

Maybe you are looking for