How to use airdrop on ipad

can ipad3 use airdrop?

No, from the bottom of http://www.apple.com/ios/whats-new/ :
5. AirDrop is available on iPhone 5 or later, iPad (4th generation), iPad mini, and iPod touch (5th generation) and requires an iCloud account.

Similar Messages

  • How tu use my mini ipad i forgot my password

    how tu use my mini ipad i forgot my password

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How to use blutooth with iPad  I don't know anything about blutooth

    How to use blutooth with iPad  I don't know anything about blutooth

    Start with the iPad User's Guide:
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    page 35.
    Regards.

  • Hi, anyone knows how to using airdrop between mac and iPhone 5? My mac was using mavericks and my iPhone was using OS 7. There is airdrop icon in my mac. And already on. But it is searching constantly. Even my airdrop in iPhone already on for everyone.

    Hi, anyone knows how to using airdrop between mac and iPhone 5? My mac was using mavericks and my iPhone was using OS 7. There is airdrop icon in my mac. And already on. But it is searching constantly. Even my airdrop in iPhone already on for everyone.

    Yes, you can use it for Mac computer > Mac computer or iDevice > iDevice. It's because they have different operating systems.

  • How to use texting on ipad mini?

    I just got my new ipad for Xmas I was wondering how to use the texting on the ipad mini

    You have to set up your iMessage account on it and then you can iMessage other people using iDevices.
    In the Safari browser on your mini there are bookmarks to the users manual.

  • Using Airdrop in iPad with mac book

    I have an iPad 4th gen and mac book pro retina display. i just upgraded os in iPad to ios7; but however best i try cannot share files via AIRDROP.
    I have kept teh Air drop on (with "everyone" selected in the control center) and also my mac book Air drop is perhaps on - have no method to find) but i cannot find my iPad on mac or the otherway round also.
    can any one help me?
    Chandra

    Thanks for your response!
    However, i dont understand.. does this mean i can use Airdrop only between two mac's or between Ipad and Iphone etc...
    not possible - say from mac book to iPhone or iPad and vice versa?
    sorry to keep asking, but i am a new user of mac so little difficult to find answers quickly!!
    Chandra

  • HT4783 I'm trying to learn how to use Airdrop between my wife's Mac and mine. We both have it, but this article did not help us learn HOW to share files.  Yippeee that we can...but HOW?

    My wife and I are trying to learn how to use Air Drop.  The "tutorial" showed us where it is.  It came up.  I saw hers (Mac).  She saw mine (Mac). But where to go after that is, apparently, in the cloud somewhere.  The description says we can share files...which is nice...but nothing tells us HOW to share those files. 
    Thanks for your help out there...
    Dennis

    1. Open a new Finder window or use one that's already open
    2. Click on Airdrop, press Shift+Command+R, or find "Airdrop" in the "Go" menu
    3. Drag your file to the icon of the person you want to send the file to (if you have mountain lion, you can use the share button).
    4. The other person has to click "save"
    5. The file will send and appear in the receiver's downloads folder
    In Mountain Lion, a new feature was added: the share button. It's a button with a picture of a box and an arrow jumping out of it. Click on it and the third (and last) option is "Airdrop" and clicking on it will allow you to send files over Airdrop without opening it in Finder.

  • HT3879 how to use iwork for ipad?

    How to use iwork with an ipad?

    The article you attached is for iWork for Mac.  Note all requirements in the article specify Mac and not iPad.
    So, as kb1951 said, if you want iWork components for iPad (Numbers, Pages, Keynote), you go to the iPad's App Store and purchase them.  You would need to pay for them regardless of whether you have them on a Mac or not.

  • TS1741 How to use airplay on iPad?

    I just got an apple tv and downloaded the remote app, but can't figure out how to have the ipadbdisplay on the tv.  Any suggestions?

    I think I figured it out, I was trying to mirror my iPad on my TV using Apple TV.  Althouth it doesn't seem to work well with games, it seems like it kickes from TV to iPad if I try to play a game!

  • How to use ePrint on iPad/iPhon​e

    I just bought an HP Photosmart Premium printer.  I have installed it and it is working wifi with my Apple computer.  Now i would like to print using my iPhone or my iPad.  I downloaded the app ePrint on my iPhone but it is asking me questions i don't understand.  Has anyone done this and can you tell me what i need to do?
    This question was solved.
    View Solution.

    Eprint asks me for my gmail address and password. Keeps rejecting the password

  • How to use LTE on iPad 4 (A1460) from US (Verizon) in the UK (EE)

    If you purchase the iPad 4 model A1460 in the US on the Verizon network, it will not connect to 4G LTE on the UK EE network - you will only get 3G.
    To enable LTE you must do a full factory reset (Settings -> General -> Reset -> Erase all Content and Settings).
    Once the iPad restarts it will connect to LTE.  Note you should backup any data first and then you can restore it afterwards and will still have LTE.
    This seems to be a recurring problem from discussions with the EE store and helpline who could not diagnose the problem.  Apple telephone support eventually suggested the above steps which are due to Verizon's LTE network settings being stored on the iPad and there seems to be no other way to switch to the UK ones other than a full erase.
    Hope this helps others!

    Hi Dave,
    Verizon is somewhat different from normal GSM/HSPA/LTE carriers in the respect that it still offers some of it's service over CDMA EVDOx1 A/B. The CDMA protocol is not usually delivered using a sim card only, and there are carrier settings in the iPad which are for this purpose.
    I do not believe the iPad is locked to Telstra as 4th generation iPads are all unlocked by default. You need to give the MEID and IMEI number to Verizon. When they have been added to Verizon's network, then insert the Verizon sim card and completely factory reset the device. You will lose everything. When the device reboots, it should come up onto Verizon. If you restore, you may lose the Verizon carrier settings.
    The 4th generation A1460 iPad seems to be a dual mode device between CDMA and non CDMA carriers. And the mode seems to be set upon the first encounter with a sim card after a complete reset.
    To confirm the device is not locked, pop a T-Mobile or AT&T sim card into it. If it is locked, you will get a message stating that it is carrier locked. If not, you should see 3G service on either of those networks.
    I would strongly recommend finding a small techie independent dealer who can probably help with this more than the staff in Verizon. Verizon is a very controlled network and BYOD is not massively supported at the best of times. They are unlikely to have experience of this and their text book response would be that they do not support it.
    I'm also unsure as to whether or not Verizon offers LTE data on Prepaid plans so if it is a prepaid plan, you would only get 3G (CDMA) which after using Telstra would not impress you much speed-wise.
    What may be an easier solution although not as desirable would be putting a prepaid T-Mobile sim card in. They now support DC-HSPA on 1900Mhz in many markets and it is nearly as fast as Verizon's LTE and quite cheap too. (With this T-Mobile solution, no reset would be required).
    Good luck.
    J.

  • How to use "Find my iPad"?

    When you locate a device using Find My iPhone app, I type a message and it sends the message to the device. It also shows on my computer the location. My question is this: Once this is done, I can move my device to another location, turn it off or keep it on but the only thing that the computer will show is the location again. How do I get to the window that allows me to send a message/sound again? As an example, if I recover the device and then lose it shortly thereafter, going to the computer only allows me to see the map from the initial time that I lost it.

    I'm glad to help,
    Here's How:
    As noted above, you need to have set up Find My iPhone on your device prior to it getting lost or stolen. If you did, go to https://www.me.com/ in your web browser (there's also a Find My iPhone app [opens iTunes link] that you can install on another iOS device to track it. These instructions are for using the web-based tool).Log in using the account you used when setting up Find My iPhone. This may be your Apple ID/iTunes account.
    When you log in, Find My iPhone will immediately begin trying to locate your device. You'll see onscreen messages as it works. If the device is turned off, the map will display its last known location, not necessarily its current location. When it's turned back on, the map will update.If it finds your device, it will zoom in on the map and show the location of the device using a blue dot. When this happens, you can zoom in or out of the map, and view it in map, satellite, and hybrid modes, like any Google Map.
    When your device is found, a window will pop up over the blue dot (if it disappears because you clicked elsewhere on the page, just click the blue dot again to get it back). Click the window and you'll see the various options you have.The first option is to send a message to the device or have it play a sound. You can send a message--for instance, letting someone know how to return the device to you--that will appear onscreen like a text message.Sending a sound to the device is best when you think you've misplaced your device in the house or office and want help finding it.
    You can also click the "lock" button. This will allow you to remotely lock the device's screen and set a passcode (even if you hadn't previously used a passcode) that will prevent the thief from using your device or accessing your personal data.To do this, click the "lock" button, enter the 4-digit lock code you want to use twice, and then click "lock" again. Your device will now be inaccessible to the thief unless they guess your code.
    For even greater security, you can also remotely delete all data from the device. To do this, click the "wipe" button. There, you'll see a warning (basically, don't do this unless you're absolutely sure you want to). Click the box that says you understand what you're doing and click the "Erase All Data" button. This will delete all your data, preventing the thief from accessing it.If you get the device back, you can restore your data from backup.
    If you think your device is on the move, click the curved arrow at the top right corner of the screen to refresh and get a new fix on your device's location.
    hope this helps!!

  • How to use celluar in iPad wifi

    Hi how to connect m'y sim to iPad 3,wifi

    If you don't have an iPad wi-fi+cellular, the iPad wi-fi doesn't include cellular connection capability.
    If your cell phone supports tethering and you have a tethering plan with your cell phone carrier, you can tether your iPad with your cell phone to share your cell phone's internet connection via your carrier's cellular network.

  • How to use Nsopenpanel in iPad applications

    How can I browse a zip file from my local sub system .I'm developing an application for iPad.
    thank you so much

    Thanks for your response.
    so, I need to implement a function to download the zip file from the website and write it into own sandbox or home directory. Then I can read the files from sandbox and save the data in one of the directories in my own sandbox.
    If it makes sense I have few questions:
    Is there any memory limit for the data in the application sandbox.
    which method is suitable to save data. SQlite or Core data. (considering my data size ranges from few mega bytes).

  • IPad and roes for national photo lab...how can use this on iPad?

    I would like to use the roes system that is required for national photo lab.  Safari will not allow this to load.  How can I make this work?

    I hope this helps:
    http://itunes.apple.com/app/roes/id533327862?mt=8

Maybe you are looking for