How to use airplay with wifi dongle?

My mac's wifi adapter was broken, so I bought a wifi dongle - ASUS USB-N10.
It wasn't work until I installed the driver: http://www.wireless-driver.com/realtek-rtl8192su-adapter-macos-drivers-ver1082/
And however it seems to be a wifi assistant to help me using my wifi dongle more than a simple driver, and my mac recognize the wifi dongle as a lan connection, so I just cannot use airplay anymore!
The question is: how can I make my mac recognize the wifi dongle correctly (as a wifi)?

AirPlay is only compatible with AirPort base stations.
The dongle is not compatible with AirPlay.

Similar Messages

How to use Airplay with AE and ATV with no internet connection?

I am currently at a resort that only has the AT&T Wi-fi. Unelss someone knows how to hook an AppleTV into an AT&T network and get past their acceptance of terms screen I need to figure out how to get this to to work.
I have an airport Express set up as it's own network. I had the Apple TV join that netowork as well as my iPad. When I start to play a movie the Airplay icon comes up and I tell it to use the AppleTV. On the TV a notification comes up in the corner that has the movie name but then that's it. It never plays. The AE was unhappy about not having an internet connection but I told it to ignore not having one and it turned green.
As far as I can tell I should in theory be able to have the AE be it's own network without internet and use Airplay between my iPad and the ATV. It's just a no go and I can't tell why.
Thoughts? Settings I may not be aware of? I can't figure it out.

AirPlay is only compatible with AirPort base stations.
The dongle is not compatible with AirPlay.

How to use airplay with pandora on macbook

I'm trying to use airplay to play a browser based player over airplay speakers. I can do this with my iPhone but i can't figure out how to do it on Macbook. Please help

AirPlay is only compatible with AirPort base stations.
The dongle is not compatible with AirPlay.

How to use bbm with wifi?

please help.thx

Try posting more detail of your issue.
BBMessenger works fine on WiFi -- AS LONG AS you have a BlackBerry Data Plan on your mobile provider account.
AND, next time post in an appropriate section of the forum, not the Forum Feedback and ideas section.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do i know if my macbook can use airplay with apple tv?

how do i know if my macbook can use airplay with apple tv?

AirPlay Mirroring needs an Early 2011 or newer MacBook Pro, so your computer supports AirPlay Mirroring. Make a backup, open App Store and purchase OS X Mountain Lion

How can I use airplay with Macbook Pro 9,2 Mid 2012/ Mac OSX Lion 10.7.5

What do I need to do to play Airplay on Apple TV from my computer. The option is not in my display setting, so, obviously, I do not have the capability. Do i need to upgrade my software?

You can't.
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

I have an Iphone 4S on ios7.0.3 and am attempting to use airplay with an airplay enabled AV receiver from Pioneer (VSX-53). I also recently upgraded my wireless router. I no longer get the airplay icon on my iphone? Any suggestions?

I have an iphone 4S on ios 7.0.3 and am attempting to use airplay with an airplay enabled AV receiver (Pioneer VSX-53). I also recently upgraded my wireless router and the roouter is working fine with the five elements on the network. Prior to the upgrade to 7.0.3 and the router upgrade the airplay feature working fine and i was able to consistently use airplay to stream music th the AV receiver. After the upgrades the airplay icon no longer appears on my iphone or on my macbook running itunes. Any suggestion on how to trouble shoot the missing airplay icon is much appreciated.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Is airdrop is avaiable on iphone4g n how to use airplay ... n something playing game like sufers subways its get stuck middle .. y is it so .. help me out..

is airdrop is avaiable on iphone4g n how to use airplay ... n something playing game like sufers subways its get stuck middle .. y is it so .. help me out..
n which is best app to saver battery life... n how to make ma phone run smootly..
pls help me >>>
<Email Edited by Host>

Hi ChrisBell,
my Pixi shows me the missed calls in a list of its own? I don't have many, so maybe I'm missing something. But I agree with your half-ranting to some degree. As a long-time Palm-user (my last phone was a Treo 680, terrible form factor, good UI), I am really disappointed with the standard software on this phone. Memos and Tasks, which AFAIK were there and useful even on the first Newton's, have regressed beyond the point of usefulness now (solution: Toodledo and Done!, at least for now).
But ChrisBell: if you feel up for it, you could start tinkering. Many people love these phones so much they have started developing patches to solve the obvious problems skimmed over by developers. Try looking up "webosquickinstall" and "preware", and you will find over 300 patches and a lot of free software to help you out. I am not a computer wizard myself, but I am not scared of them either, and I have been able to make good use of all these extras made available by the community.
just a thought, might help you out on a few of your half-rants

Use safari with wifi

When I use safari with wifi, my ipad always reopen
I do not know what is the problem with ipad?
someone can help me to solve the promblem!!

Update: worked fine with free hilton wfi. Splash/redirect page loaded fine
Then failed to work again, this time with reagan airport wifi. After 30 mins on phone with apple support just mindlessly reading me through the generic support tips i already tried that didnt work, they gave up.
Now at marriott and redirect page worked and free wifi running with no problems.
How is it that i can be sitting next to someone at the airports that also has an ipad2 and they can connect fine and i cant??????? Are there really no solutions available?
And why is the final apple support suggestion from help desk to have the network router admin reset their router? 1) obviously not going to happen at public access points and 2) shouldnt apple design a product that can access these basic wifi interfaces that will commonly be encountered when using wifi without the need for network admin intervention????

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to use variables with

I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).

Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya.

How to Use Gmail With Apple's Mail?

Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tml

I notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky?

Can I use airplay with lion

Is it possible to use airplay with lion? I would like to display the content of my Macbook on my HDTV via Apple TV. Thank you!

Sadly, only music and videos saved in itunes can be streamed to the appletv. Hopefully this will change soon!

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

How to use Count with Date Parameters

Hello,
I am having issues using the Count() function in conjunction with date parameters.
This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
Anyone have a suggestion on how to use Count() with date parameters?
Thanks.

Any chance you can get the date formats in the correct format from siebel?
I don't know Siebel - so I can't help you with that. If you get the correct format it is just
<?count(row[(FromDate>=date) and (date<=ToDate))?>
Otherwise the approach would probably need to use string function to get year/monthd/day from the date
and store it into a varialbe and compare later the same way
<?variable@incontext:from; ....?>
<?variable@incontext:to; ...?>
<?count(row[($from>=date) and (date<=$to))?>
Potentially you can use the date functions such as xdofx:to_date to do the conversion
[http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
But I am not sure if they are available in your siebel implementation.
Hope that helps

How to use airplay with wifi dongle?

Similar Messages

Maybe you are looking for