How to use airport

I have been travelling a lot and I would like to take advantage of hotspots around the world. How do I equip my Powerbook?
I found an Airport set up assistant, but it says there is not the hardware, is that the 'Airport card', which I need to purchase separately?
I have read other postings where it explains to look for the Airport icon in network, I do not seem to have one.
Thank you for any help
Cristina

You need to make sure your Powerbook is Airport ready. You will need to check you specs on your Powerbook.
You can also check your hardware by going to the system profiler. This will show you what hardware you have installed.
If you have an Airport called installed you can configure it by going into preferences and then networking. It might be turned off.
The airport assistant is a tool to setup an Airport Express or Extreme base station. It isn't for the airport card on a system.
If you don't have an Airport card and it is Airport ready then just go to the Apple store and purchase an Airport card.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/1.RSLID?mco=3 93BD37&nplm=M8881LL%2FA

Similar Messages

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use Airport Express as a sound output device

Guys,
Is there a way that I can use Airport Express as a sound output device? So, I can play all the sound on my HIFI.
thanks in advance

In order to listen to the non-iTunes audio streams through your Airport Express you will need to use the third party software Airfoil.
http://www.rogueamoeba.com/airfoil/
iFelix

How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

Hi,
I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
Can anyone help in how to get the 'double NAT issue' resolved?
Thanks!

So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
If they can see the HD connected to the AirPort Extreme, will they be able to access it
Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
or will they still need the password needed to get onto the AirPort Extreme network?
The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
Once again, in very simple terms, you have two doors (access points) that open into the same room (network). One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

How to use airport time machine

i am from germany an i dont know how i have to install the time machine

I presume you are talking about Time Capsule (TC) since this discussion area is the hardware Time Capsule.
Time Machine (TM) is the backup software on your computer. The two are not actually related.. TC is a target backup location for TM.
Read the setup guide.
http://support.apple.com/manuals/%23airport
The airport utility is supposedly automatic now.. I never believe in automatic because there will always be 10% of cases it gets wrong at least.
Reset the TC to factory if it doesn't show up and start over.
You must be using wireless in your MBP and please remember to set ipv6 in wireless section of network preference to link-local.
Let the airport utility make the choices for you.. they are generally correct.. start with the TC plugged into your main router by ethernet.. WAN TC to LAN modem/router.
If you cannot figure out how to setup the TC after that normal routine, tell us exactly what you are using for modem router and where you get to in the setup so we can help you with manual settings.

How to use Airport Time Capsule as a wireless hard drive?

I have purchased the Airport Time Capsule 3TB but I really don't need a backup disk, so I want to use it as a wireless hard disk to be used in my network, how can I do this? Can someone give me a clear step by step guide of how I can do this?
I appreciate your help and support.

There is no difference between using the TC as a backup or as a network disk.
Mount the disk in finder.
Copy files to it and from it.. in exactly the same way you copy files between disks in a Mac.
As a file store the TC is not good.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

Here is how to use Airport AirDisk with Time Machine

I haven't tried this myself yet (I will give it a go this weekend), but since a lot of people are complaining about this, here is a link with instructions on how to do it.
http://www.macosxhints.com/article.php?story=20071026075201634
for your convenience, here is an abstract of the instructions:
First connect your AirPort disk directly to your Mac, and set up Time Machine to use it. If you want to let it back up now, that's fine. Alternatively, you can stop it and let it back up when it's plugged back into the Airport Extreme Base Station (AEBS).
Time Machine creates a file in the root directory of the disk called .1234abc5678 -- the exact name will differ on your Mac. It appears this file has to be in the root of the network shared directory. In my case, I use user accounts to manage my AirPort disk, so the directory that it actually shares out is called /Shared on my disk. So I simply move the hidden .1234abc5678 file, or whatever it may be called, to the /Shared directory. If you let Time Machine back up while plugged in locally, you will also have to move the .sparsebundle file to the /Shared directory.
Eject the disk and plug it back into the AEBS and mount it via AFP, and Time Machine should pick it right up. This method should work for any AFP share, not just AirPort disks.

I assume that this is a new AirPort Express and you have not tried to configure it previously.
Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the AirPort Express and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
You should be all set.

How to use Airport Express to extend range in conjunction with Belkin N Wireless Router

I would like to know how I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express? I saw a similar post to this question but the results talk about using this in conjunction with time capsule - I only have a Belkin router and the Airport Express.
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

Thank you for your quick reply. Can you please expand upon how to set up the 'bridge' mode?
I tried connecting the AE via Ethernet from the Belkin router but was not successful in being able to get any additional coverage. I feel like I am missing a vital set of instructions with set-up/configuration details.
Thanks again.

How to use AirPort Express over a dorm network

Hi,
I used my AirPort Express at home to add wireless to my existing home network and it worked well.
However, I can't get it to work here so I'll give you every detail possible in order for you to explain me how to configure it. A million thanks in advance. (I'm giving you the specific address just to illustrate it better)
I can only use one IP address on the network which is 192.168.1.25
The subnet mask is 255.255.255.0
The default getaway is 192.168.1.1
The preferred DNS is: 195.235.113.3
The alternate DNS is: 80.58.32.97
Do I have to put the AirPort Express IP address as 192.168.1.25? And can I use any range of DHCP IP addresses or I must use 192.168.1.x?
Thanks for helping me guys

You need to use NAT in order to share the single IP address.
If you had two (one for the AX and one for your computer) then you wouldn't need to use NAT.
On the Internet Tab use the following.
Connect using Ethernet
Configure Manually
IP address 192.168.1.25
Subnet mask is 255.255.255.0
Router Address 192.168.1.1
DNS 195.235.113.3
80.58.32.97
On the Network Tab
Check Distribute IP addresses
Share a single IP address using DHCP and NAT
I would use 10.0.1.x addressing
On the Airport Tab
Change Wireless Security
Use WPA
Use a password like this
45fs6ue6v1d5fg7d55dsg555
You may need to add the DNS addresses to the clients in order to access the internet.
This may not work, and I would in fact advise talking to your campus network people instead.
iFelix

Anyone know how to use airport express to bring internet to a powermac G5 model power PC G5 using airport express?

I bought an airport express and was told that I can configure it, and then move it to the G5 and connect it with the ethernet cable giving the G5 access to the network. But the laptop I first configure it to loses the connection once I remove the ethernet cable between the airport express and the modem. When I connect the G5 to the airport express nothing happens. Any ideas?

Hello Ed,
Is this how you set it up?
http://www.apple.com/airport-express/
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

How to use Airport Extreme as a wireless hub

I just switched ISPs and decided to move the location of the modem. Bought a new Airport Extreme and set it up next to the modem. I get good WiFi through out the house (30-50Mbps). However, I have a location (in the entertainment center on opposite side of the house) that needs wired connections. Running wires to this location is not an option. I thought I could repurpose an older (~5yrs) Airport Extreme for this purpose. I reset the old Airport Extreme and then set it up using the Airport Utility to "Extend" existing network. Setup goes fine but then network performance drops to almost nothing (download speeds of <1Mbps). I suspect the two routers are interfering with one another. Not sure what to do. Is there an option to wireless connect the Old Airport to the New Airport, but not extend the wireless network, while keeping the ethernet ports on the back active?
Thanks in advance for your help.
-A

Running wires to this location is not an option.
If the area has poor wireless connection.. when you locate the airport there it will not get much signal and so will give very poor signal.
What you are asking to do.. will not help.
Is there an option to wireless connect the Old Airport to the New Airport, but not extend the wireless network, while keeping the ethernet ports on the back active?
No, there is no such option and it would not help anyway. The problem is the location of the airport is just very poor.
What about trying Ethernet over Power adapters.. called homeplug in some areas. They do not always work but when they do, will usually work better than wireless.
Otherwise you have to do some longer cords and move the old airport nearer to the new one or into a better location.. eg up higher in the room.
I thought I could repurpose an older (~5yrs) Airport Extreme for this purpose.
What model is this exactly?
Running what firmware?
You can sometimes improve things if you move the wireless link from 2.4ghz to 5ghz .. I use a similar setup and strangely discovered that although signal is better at 2.4ghz the speed is very poor.. by forcing the connection to 5ghz I actually get so much better speed.
I would also note it is extremely hard to get any useful info out of the current airport utility.. If you have a machine running older OS or even windows so you can run 5.6 utility it will show you the link speed with signal strength.. and you can use that to locate the airport in the best location.. small changes can make huge differences.. because the material it has to travel through changes.
Here is what my links look like in v5 utility. The centre one is the main router.. the ones on each side are the extenders.

How to use airport express wired and wireless at the same time

Hi,
I currently have FiOS with Verizon, they ran a coax cable to the Verizon router. I didn't ask them to switch to CAT6 cable since I have an airport extreme base station and an airport express base station (both are the newest generation). I ran a CAT6 cable from the Verizon FiOS router to my AEBS (extreme) to make it the default wireless router. The Verizon router and extreme are in one room. Now, the Airport express is in my living. I'd like to extend the wireless network from the extreme. However, I can't seem to find a way to use both wired and wireless from the airport express at the same time. It's now either via wired, or wiresless. So is there a way to get both work?

Can you tell us if you used Apple's instructions for a "roaming" network?
http://support.apple.com/kb/HT4260
Although the instructions picture a 2nd AirPort Extreme in the illustrations, the setup instructions would be exactly the same for an AirPort Express.

How to use Airport express via ethernet cabe/switch. iTunes does not detect

Can anyone help me help iTunes FIND my airport via ethernet?
My macbook is out of range wirelessly, but I have a jack that connects to the Airport (via a switch). How, please, can I get iTunes to "see" it?

Yes. Thank you.
I see the "Enable iTunes Over Ethernet" option HOWEVER, it greyed out and unselectable! Now what? I think you are on the right track, but do you know why it would be greyed out? Thanks, in advance, you people at the forum are truly cool.

How to use airport

Similar Messages

Maybe you are looking for