How to Use Altiverb IR in Space Designer?

Hello, how can I use Altiverb Impulse Responses in Space Designer? Do I need to convert them? How? SD doesn't load the .C files, does it

It's my understanding that the Impulse Responses in Altverb are coded in a way that they can only be used within Altverb.
Which makes perfect sense. They certainly don't want people copying Altverb's IR responses from their friends hard drive, to use within Logic (or any other DAW) for free, right?

Similar Messages

  • How to use the Columns Hidden | space in the bottom of af:panelCollection?

    Hi,experts,
    In jdev 11.1.2.3,
    I can see a row of Columns Hidden | Columns Frozen in the bottom of component af:panelCollection - pc1 which have an af:table - t1 component inside in designer view,
    and can see there is a blank row space only with "|" inside when the page is running.
    Now I want to use this blank row space such as to display row numbers for the table, so I set the property for the panelColletion as following source code:
    ==========================
    <af:panelCollection id="pc1" inlineStyle="width:1250px; height:500px;">
    <f:facet name="menus"/>
    <f:facet name="toolbar"/>
    <f:facet name="statusbar">
    <af:group id="g4"/>
    </f:facet>
    <af:table value="#{bindings.TView1.collectionModel}" var="row"
    rows="#{bindings.TView1.rangeSize}"
    emptyText="#{bindings.TView1.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.TView1.rangeSize}" rowBandingInterval="1"
    filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
    queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}" filterVisible="false"
    varStatus="vs"
    selectedRowKeys="#{bindings.TView1.collectionModel.selectedRow}"
    selectionListener="#{bindings.TView1.collectionModel.makeCurrent}"
    rowSelection="single" id="t1" inlineStyle="font-size:xx-large; font-weight:bolder;">
    <af:column sortProperty="#{bindings.TView1.hints.GoodsStatus3.name}" filterable="true"
    sortable="true"
    headerText="#{bindings.TView1.hints.GoodsStatus3.label}"
    id="c42">
    <af:outputText value="#{row.GoodsStatus3}" id="ot33"/>
    </af:column>
    <f:facet name="footer">
    <af:group id="g3">
    *<af:outputText value="RowsNumber：" id="ot44"/>*
    *<af:outputText value="#{bindings.TView1Iterator.estimatedRowCount}"*
    id="ot43" partialTriggers="::pc1:t1"/>
    </af:group>
    </f:facet><f:facet name="detailStamp"/>
    </af:table>
    </af:panelCollection>
    =====================
    but when run the page there is no display for the row number, instead on the bottom of the table, there is only a blank row with "|" inside.
    How to use the Columns Hidden | Columns Frozen space in the bottom of component af:panelCollection ?
    Thanks!

    Hi, Arun
    It works.
    As in my use case, can draw an af:toolbar component into statusbar of Panel Collection facets in Structure view.
    There is still a small issue:
    cannot see the Columns Hidden|Columns Frozen component in the Structure view,
    and if drop more than one af:toolbar into statusbar, the sencond one will fall/wrap into second row, even though there is enough space on the first row (to occupy a second row in statusbar will be a waste of space), and cannot see how to adjust.
    Thank you very much!
    bao

  • How to use Template manager in Adobe Designer

    Hi,
    I am new to WebDynpro. I am trying to import templates in Webdynpro Adobe Designer.
    In the Interactive Form Designer, there is a Menu called "Tools", which has option "Template Manager".
    When I select a template there is only a buttion Set Selected as default after i click it but nothing happen!! Can anyone please let me know how to use the Template Manager?
    Thanks.
    Edited by: bo wang on Jan 15, 2008 9:34 AM

    Yes, here you dont have option of using standard template. In this case, just right click on the Project name shown in WD perspective on the left hand side of screen and check the Projectlocation in Properties --> Info.
    go to "Projectlocation"\src\configuration\Components. Here you can find the XDP file. Open this XDP file, in this XDP you have File option. Select the template, and save the file.
    This change will appear in WD.
    With regards,
    Amit

  • How to use the local storage space in OVM 3.2.1

    Hi
    We have installed OVM 3.2.1 in a server , which has 1TB HDD and 350GB RAM and we have installed the OVM manager in a seperate machine.
    I am able to identified the server in the manager console but how can i use the local storage space.
    Kindly help us to solve this issue.
    Regards
    Niranjan

    Hi,
    if you want to import an ISO image, why you mount it?
    after you complete your installation.
    1- discover server. (if your installation is finished good, then you found your server in Onglet Servers and VMs / unassigned servers)
    2- Go to Perspective / Physical Disk to verify that detect the second partition
    3- if it's good, then crearte a pool with no Clustered Server Pool.
    4- create a repository on your physical disk.
    5- Go to ISOs in your repository and click import iso image.
    Now, verify that your apache/httpd server it is working or not.
    1- after you install apache/httpd
    2- you shoud verify if it is running or not (pgrep httpd) if not start it (e.g. service httpd start )
    3- copy the ISO file under /var/www/html
    4- open your browser and verify.
    and at this point i think it is good.
    then copy the url to import the iso file with Oracle VM Manager
    the URL Look's like http://IP-Address/image-iso.iso
    you should verify that the IP-Address is reached from the Oracle VM Server.
    and that's it
    I tested it: and in my case:
    i have copied the windows iso image:
    cp ../windowsXP.iso /var/www/html/
    and now my URL is like * http://IP-Address/windowsXP.iso*
    I hope this can help you
    Best Regards

  • How to use Decode Function in Webi / Designer - BOE XI 3.1

    Hi All,
    I have a SQL query which needs to include in the webi report.
    Below is the query :
    SELECT
    SECURITY.SEC_CUSIP_NO "CUSIP", 
    SECURITY.STY_SEC_TY_CD "SECURITY TYPE",
    SECURITY.SEC_DERIVED_DESC_TX "SECURITY DESCRIPTION",
      SECURITY.sec_dep_teleg_de "FED DESCRIPTION",
      SEC_STND_PR "STANDARD/FACTORED PRICE",
      SEC_STND_PR_EFF_DT "STANDARD/FACTORED PRICE Date",
      SECURITY.SEC_YIELD_PR "YIELD PRICE",
      SECURITY.SEC_YIELD_PR_DT "YIELD RICE EFFECTIVE DATE",
      STND_PR_VND_VENDOR_CD "PRICE SOURCE",
      SEC_MATURITY_DT "MATURITY DATE",
      SEC_ISSUE_DT "ISSUE DATE",
                 CASE WHEN SECURITY.STY_SEC_TY_CD IN ('BA','CD','CDD','CDE','CDM','CDV','CP','CPD') THEN
                    (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * (SECURITY.SEC_STND_PR) / 100
                 ELSE
                    (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * (  (  SECURITY.SEC_YIELD_PR * DECODE (SECURITY.SEC_PRIN_FT, 0, 1, SECURITY.SEC_PRIN_FT))) / 100
                    * DECODE(SECURITY.STY_SEC_TY_CD, 'AMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'MMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'AMPT', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 1 )
                 END
            ) "MARKET VALUE"
    FROM SECURITY SECURITY
       ,   position position
    WHERE STND_PR_VND_VENDOR_CD = 'VT'
    AND SEC_MATURITY_DT > SYSDATE-1
    and SECURITY.sec_sys_id=position.sec_sys_id
    I could create a report which has selected objects and defined where condition from the above query. I have also created a variable for 'when' & 'then' condition but stuck at else part which contains 'DECODE' function.
    Please suggestions how to write the same at the report or designer level.
    Thanks,
    Rameez Shaikh

    Hi Rameez,
    Looking at the query you can create the object directly in the universe, either create two objects one for inner decode and use it in outer case logic. In report it is nothing but nested if logic. For eg.  If(a=b;1;(if(a=c;2;3))
    Thanks
    Gaurav

  • How to use ConvertWord.exe in LC Designer?

    I download the setup files (trial version) & installation is successful. And using ConvertWord.exe for converting my sample word doc into pdf format file. However, the generated PDF is not getting opened, as Adobe Reader says "it is either not a supported file type or because the file has been damaged ....". Following is the command executed in the command prompt:
    C:\Program Files\Adobe\Adobe LiveCycle Designer ES4>ConvertWord.exe in="C:\test\RESUME.doc" out="C:\test\resume.pdf" error="C:\test\error.log" log="C:\test\log.log"
    I even reviewed the error & log file, generated from above command. But didn't found any error details in the log files. Please suggest on where the issue is expected.

    This is the Adobe Reader forum; you better ask in http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es

  • How to use opentype font in output designer

    I have to use Kaufmannstd.otf font for my document but I am not able to add that in Presentment target. Any Idea?

    The presentment target will dictate what fonts can or cannot be used.  Type 1 fonts (such as open type) are typically available in a postscript presentment target.  If you are set for pdf, the fonts will only show up in the font setup if they are in fact embeddable.  Perhaps the Kaufmannstd font is not an embeddable font.

  • How to use Distribute on Web Application Designer 3.x

    guys i am trying to Distribute a report on the portal , which has already got its selection parameters, instead of bookmarking it , i want to distribute it, what actions i need to distribute it, i tried it few times but it doesnt work.
    " right click on the template click distribute and follow steps, when i schedule it, i dont receive any e-mail or anything?
    any thing i have to do before i am able to distribute the web template?

    Hi Stefan,
    Thanks for your early response.
    As you suggested i have added the image to MIME Repository successfully.
    Now i have to add the new icon to exsisting template.
    Stefan my problem here is
    I have to add new icon but i donot need to change the icon.
    you are giving the procedure how to change the exsisting icon but my problem is i have add new icon with out replacing any one exsisting in the template.
    Thanks in Advance
    Pedamarla

  • Any advice for space designer preset?

    just would like to know what's the best preset from ur point in he space design..
    my taste in term of reverb is more like lexicon 480, AMS,and real old plate.
    any goodies?just to lazy to listen to all those preset.
    will be curious to know ur habit .

    I use matches and petrol.
    I used to use any of the space designer rooms that didn't colour the sound too much - not many of those. I have since moved to Altiverb and am loving it.
    Any reverb sound has to be appropriate to the material. I understand about all the presets. I started off one afternoon intending to try them all and got as far as about 3. If you have an idea how long you want your reverb to last, then you can start auditioning only those that are within the right ballpark.
    It's a real eye opener to use Space Designer as an insert rather than an aux send effect. Balancing the wet and dry can really put the sound in a space, rather than just giving it some kind of a tail

  • Impulses loaded into Space Designer?

    Hey does anybody know how to load impulse responses into Space Designer? Just downloaded some third party stuff and wanted to try them out. They are called "Beamsonic Impulses". Thanks

    Yeah, using gates would be clumsy and buggy. What the Sonic Birth API does is is allow you to construct your own AU by instatiating actual code. But you don't have to really write the code. You drag visual modules around and link them with virtual cables. Each module is ultimately a C++ class function and you're really just building object oriented code with a GUI. There really is very little you can't do. For example, you can even attentuate output amplitudes with whatever function or equation you wish to write. Recently I wrote a fade in/fade out plug that follows exponential curves when a timing loop is started by a boolean variable switching from 0 to 1. Designing a virtual logic circuit to test the input for its amplitude is very easy and that could be used as a trigger to switch between the output of several convolutions. To the end user it would look like any other AU if you packaged the IR wave files with the plug you create and set them up as presets. The catch is that the user has to actually have the Sonic Birth framework on their machine to use it. It doesn't make a generic AU that everyone can use.
    If I get this baby working I'm gonna get real excited.

  • How can i use plugins from main stage like space designer in logic express 9.1.6

    I'm using logic express 9.1.6. today I bought Mainstage 2 in the appstore. there are a lot of powerfull plugins. some of them, like e.g. space designer, are not included in logic express.
    how can I use the in logic express? they are not listed automatically with all the others...
    thanx

    Hi
    No can do.... these plugs etc are part of the code for Logic Pro and MainStage (and not for Express)
    CCT

  • I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

    I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

    This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
    There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
    So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
    And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
    Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

  • I need to free up storage on my iPhone 4s to do an update.  I have turned off my photo stream, but when I go into Usage Settings, it says that photo stream is using 3.7gb of space.  How do I get rid of this?

    i need to free up storage on my iPhone 4s to do an update.  I have turned off my photo stream, but when I go into Usage Settings, it says that photo stream is using 3.7gb of space.  How do I get rid of this?

    iCloud is not designed to "store" photos (as in long term storage).  iCloud can be used to sync photos from one device to another (photo stream) and to store a backup of the camera roll.  But that's pretty much it.
    Camera roll is the group of all photos taken by the device (but not other photos synced to the device from another source).  Your extra storage on icloud will do you no good.  The recommended way of storing photos on a device is to sync them to a computer.
    So, your questions..
    1) You don't/can't
    2) No, because of 1.
    3) On a computer, deleting large groups of photos is relatively painless.  not so on a device.
    4) You can't access photos on iCloud because they can't be store in icloud.  You can't view/access photos in a backup on icloud unless you restore a backup to a device.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

    I bought 3 iPhone 4s and each should have 5gb of cloud. I want to only use my one iTunes ID. How can I get this storage space increased to the 15 GB?

    iCloud storage is not allocated by device. iCloud storage is allocated to your iCloud AppleID. You get 5GB of iCloud storage.

  • How do I find what's using my hard drive space

    My wife has a 14" iBook. How do I find what's using all the hard-drive space? It only has a 40GB hard-drive (it's one of the older G3 models) but there isn't a lot loaded onto the HD. There is only 3GB space left. I've gone through every application and utility and document and every folder (document, movie, etc.) and the largest space-hogging folder is iTunes which uses 15GB because of the music. I can't find any singular folder that uses any sizeable HD space. I recently loaded Tiger so I don't know if Tiger uses the rest of the space or if it's just a combo of all the other applications.

    You could download and use WhatSize to see what may be eating up the space.
    With a 40 GB hard drive, you need to keep at least 6 GB free in order to avoid problems.

Maybe you are looking for