How to use amount control for multiple sliders in the basic adjustments window

In a webinar an instructor (Chris Orwig) demonstrated how to make multiple adjustments in the basic panel in the develop module.  He then showed how to close the basic module by clicking on the small triangle at the top of the module.  When this was done a single control bar and slider appeared in place of the closed basic module. Moving this slider allowed the instructor to adjust all previously set basic module settings at the one time.  I tried to do this.  But when I close the basic module no control bar and slider appear.  Any suggestions why this is the case?
I use Lightroom 5.4 and OS 10.9.2.

He evidently wasn't in the Basic panel, but in the Adjustment Brush:
Clicking on the triangle at the end of the red arrow yields this:
And there is your Effect slider.
Hal

Similar Messages

  • "How to use CWIMAQ control for delphi 6.0 professional?"

    I'm using frame grabber card PCI-1424 of yours and i'm developing my application in Delphi 6.0 Professional. So can anyone guide me how to use the NI controls in delphi application? Thanks in advance.

    Hello,
    Are you using ComponentWorks IMAQ Vision? If so, there is a chapter of the ComponentWorks IMAQ Vision manual that deals with the development of applications for Delphi.
    Getting Results with ComponentWorks IMAQ Vision
    http://digital.ni.com/manuals.nsf/webAdvsearch/118D3E816C49EF06862566C5006CC7E7?OpenDocument&vid=niwc&node=132100_US
    National Instruments no longer supports the development of applications in Delphi, but Chapter 5 of that manual should get you started. The instructions in the manual may need to be updated depending on what functions you use. This is due to upgrades that have occurred since that manual was created.
    Take a look at the manual and let me know if you have any additional questions on this issue.
    Regards,
    Scott R.
    Ap
    plications Engineer
    National Instruments

  • Using 1 dataset for multiple tables in the report

    All,
    Say I have a stored procedure with some parameters and the result set looks like this:
    State   ACount    BCount     Description
    VA           10            20           Category1
    TX           15            25           Category1
    VA           30            40           Category2
    TX           40            50           Category2
    NY           5              5             Category3
    NJ           10            10           Category3
    Now, what I want is 3 separate tablixes (tables) in my report using my stored procedure (just 1 dataset for all these tables). I want the result to be dispalyed something like this:
    Category1 (1st tablix)
    State   ACount    BCount     Description
    VA           10            20           Category1
    TX           15            25           Category1
    Category2 (2nd tablix)
    VA           30            40           Category2
    TX           40            50           Category2
    Category3 (3rd tablix)
    NY           5              5             Category3
    NJ           10            10           Category3
    I want Category1, Category2 and Category3 to be 3 different tablixes in my report using the same stored procedure.
    How can I accomplish that? Let me know if you have any questions.

    Hi SqlCraze,
    I also design the report using Report Designer. So you can directly do the same steps as I post.
    In the fourth step that "Insert the corresponding fields to the second table" means directly insert State, ACount, BCount and Description fields. Please note that the list control is used to split one table into several tables based on the
    Description group: one table only displays the values when Description=Category1, one table only displays the values when Description=Category2, another table only displays the values when Description=Category3. We needn't add filters in the table, just add
    the list.
    For more information about the list control in Reporting Services, please refer to the following blog:
    http://blogs.technet.com/b/microsoft_in_education/archive/2013/03/09/ssrs-using-a-list-item-to-display-details.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • How do I customize firefox for multiple users on the same device?

    Sometimes my wife uses my computer to surf the web. I'd like to have it set up so she can have her bookmarks, etc. when she's using it and I can have mine when I'm using it. Is this possible? If so how do I do it?

    hello arack, the easiest way would be to create different user accounts for you both on the mac on the level of the operating system: [[How do I share Firefox between people on a computer?]]
    or you could use the firefox profile manager to create separate profiles: [[Use the Profile Manager to create and remove Firefox profiles]]

  • How to Use Image Processor for Multiple Sizes

    I'm trying to use Image Processor to work on a folder of images and to create several sizes of .jpg's . I find an option to Save as JPEG in one size only. Is there any way to set up Image Processor to save JPEG to multiple sizes?
    Thanks in advance for your help!!!

    Hi Mehtap,
    Using the script will give you multiple selections.
    This is how I did it and it works well. It just separated the values by semicolon ";" .
    TEXT_1.setText(DS_1.getFilterText("0CUSTOMER"));
    When selected only one value:
    When selected more than one value:

  • How to use Browser Control for displaying String Results..

    Hi All,
    I m new to java. I am developing desktop application for java getting problem at some stage , i hav some string Results which i got some how by searching in some text files. Now i want to show / format this string in Browser control.
    Please help me in this...
    Thanks in Advance
    Nicky

    i m sonu could u piz tell me how to read integer from keyboard

  • How to use jampack loops for multiple accounts

    I have one computer but there are two people that will be using it. I have the jampack loops and added them to my account...but when the other person logged into their account those loops weren't in their GB library...do we have to ad them into each accounts libraries for seperatly or is there a way to do it once for both??? (it would save more HD space, wouldn't it?)
    thanks

    OK I FEEL STUPID, before i did was i said i was going to, i look in the pref for GB and noticed under the loops tab, at the bottom there is a box to be able to choose user only or all users...so i took out the loops from the library folder and trashed them, the checked the box for all user and repulled the loops back into the GB loop browser as instructed, logged into the other users account and as if by magic, the jampack loops where there!!!
    Thank you very much for trying to help me HangTime, i appreciate it!
    I guess next time i'll look for the obvious.

  • How to use a sapscript for multiple languages ? (english,

    hi ,
             i am new to sap-ABAP can any one clarify my doubt .
              and i have few more doubts,  transaction code for logo uploading ?
              standard program used for uploading the logo to  script?  .

    Hi
    To create a logo in SAP printouts just do the following
    1. Save a Logo using Imaging, Paint shop Pro or Corel Draw as Tiff file.
    2. Run  program <b>RSTXLDMC</b> and enter the following parameters
       Enter file name                     C:\COMPLOGO.TIF
       UOM                           CM
        Line width for text                132
        Text name                     ZHEX-MACRO-COMPLOGO
        Text ID                          ST
        Text language = E
        Number of Tiff gray levels (2,4,9) 2
    3.  Then Create a new window 'COMP' with attributes;
    Window COMP description Company Logo
    Left margin 7.00 CH window width 10.00 CH
    Upper margin LN window height 8.00 LN
    Finally in the text element, mention
            /: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
    Please note that if object name is not indicated as 'ZHEX...’ the logo may not be printed!
    You will not be able to see the logo in a test print. The same will be printed in actual printout.
    <b>
    Reward points for useful Answers</b>
    Regards
    Anji

  • How to use MatrixLayout control for Images in UI5

    I am trying to use MatrixLayout for my images but not able to do that....
    I have Grid Layout in that i have added  four images and that should be display like
    image_1           image_2
    image_3          image_4
    I used Horizontal Layout but think it is not best approach.
    Please help me if anyone know this....
    Message was edited by: Michael Appleby

    Hi Prashant,
    You can use matrix layout with number of columns pre-defined and create rows according to your images.
    var oLayout = new sap.ui.commons.layout.MatrixLayout({
    layoutFixed : true,
    columns: 2,
    Create row from you content like:
    oLayout.createRow(image1,image2);
    oLayout.createRow(image3,image4);

  • Using a form for multiple entries in the same year

    I am wondering if a form can be saved/submitted and added to throughout the course of a year? I want to collect quarterly data all in the same form.I am wondering if a form can be saved/submitted and added to throughout the course of a year? I want to collect quarterly data all in the same form.

    Hi, Sumit
    The Sample code for the Control Break Statement is as follow,
    loop at it1_eobi_ded into wa_it1_eobi_ded.
        at new year.
          check_year = 'X'.
          clear wa_year_total.
        endat.
        if check_year = 'X'.
          clear check_year.
        else.
          wa_it1_eobi_ded-year = ''.
        endif.
        add: wa_it1_eobi_ded-p_staff to wa_year_total-p_staff,
             wa_it1_eobi_ded-p_ded to wa_year_total-p_ded,
             wa_it1_eobi_ded-dw_staff to wa_year_total-dw_staff,
             wa_it1_eobi_ded-dw_ded to wa_year_total-dw_ded,
             wa_it1_eobi_ded-total_ded to wa_year_total-total_ded.
        append wa_it1_eobi_ded to it2_eobi_ded.
        at end of year.
          wa_year_total-month_name = 'Year T'.
          append wa_year_total to it2_eobi_ded.
        endat.
        at last.
          sum.
          wa_it1_eobi_ded-month_name = 'Grand T'.
          append wa_it1_eobi_ded to it2_eobi_ded.
        endat.
      endloop.
    Please Replay if you need more help regarding Control Break Statement.
    Kind Regards,
    Faisal.

  • How to create send connectors for multiple sites in the same domain?

    Current Scenario:
    We have 2 offices, 1 in London and 1 in India. Both are in the same domain and are connected via VPN. Both have their own separate Exchange 2003 server. Each location sends out their mail via the Default SMTP Virtual Server on their exchange server through
    their local ISP. There are no Send connectors created currently.
    We have now installed an additional Exchange 2010 server with Hub, CAS and Mailbox roles at the London site. Internal mail flow between the sites seems to be working fine.
    I believe the Exchange 2010 needs a Send connector to send out mail to the internet. However as soon as we create a Send connector on Exchange 2010, mail from the older 2003 servers at both sites start to flow out from the exchange 2010 server. This is not
    optimal for our India site since their outgoing mail now has to flow via the VPN to London and out via the new server.
    How can we configure it so that each server sends outgoing mail independently?
    Thanks

    Hi,
    In India site, you can create a SMTP connector which point to the local ISP.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • How to use print control in Sap script

    I would like to use print control in Sap script.Actualy my problem I have security font Troy ECF. Using this font I would like to print amount field in Check printing.
    we count download this font with sap .we talked to customer care they told we should hard code in sapscript. pls can any1 help on this how to do and how to use print control for this fonts.

    call this funcation. crate_text.
    CALL FUNCTION 'CREATE_TEXT'
             EXPORTING
               FID               =
               FLANGUAGE         =
               FNAME             =
               FOBJECT           =
             SAVE_DIRECT       = 'X'
             FFORMAT           = '*'
             TABLES
               FLINES            =
           EXCEPTIONS
             NO_INIT           = 1
             NO_SAVE           = 2
             OTHERS            = 3
           IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.

  • How to use User exit for MM_MATBEL

    Hi
    I want to exclude some material documents while archiving a range of material document through archive Object MM_MATBEL.
    Can you please suggest how to use user exit for this to exclude the material document while archiving.
    Please brief me details.
    Thanks,
    Debadatta

    Hi Debadatta,
    Welcome to SDN.
    Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
    Hope this will help.
    Regards,
    Ferry Lianto

  • To use one SessionInfo for multiple frames

    how to use one SessionInfo for master frame and other frame the detail
    Thanks for your reply.

    You can instantiate the SessionInfo and other dataproducer objects in frame1 and bind them to controls in the first and second frames.
    If you plan to change/execute queries pass the sessionInfo instance to the second frame.
    Hope this helps.
    Sathish
    null

  • How to use custom control in Dialog Programming?

    How can I call a subscreen using custom control in Dialog Programming?
    The required subscreen contains a calender. Any class or something available for this purpose. Please suggest.

    As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
    Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
    Regards,
    Raymond

Maybe you are looking for

  • Setting colors for item labels in JFreeChart (WaferMapRenderer)

    Hi, first of all, sorry for posting a JFreeChart related posting on this forum, but I didn't get a solution right now (I even didn't find anything useful on the JFreeChart website/forum). Here's my question... I'm trying to set the color for item lab

  • Unable to start Oracle Process manager (instance1) service.

    When I try to start this service I get the following error in Event Manager: Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fa

  • [MFGAnalytics]What value should I set on BUCKET_RANGE_NAME, MIN_RANGEetc

    Hi grus, I configure the Manufacturing Analytics on BI-Apps7.9.6.4. And source system is EBS R12. I cann't set the proper value on the file_bucket_range_master_ebs11i.csv. The name of parameters are BUCKET_RANGE_NAME, MIN_RANGE and MAX_RANGE. This co

  • Table breaking a page

    A strange thing that has happened a few times, and I have found no remedy: When I paste text including a table in the middle of the page into another document, the table moves to the start of a new page. This happens even though there is about three

  • How to use getMetaData() method in EL?

    <%     DbUtils db = new DbUtils(); %> <c:set var="tableName" value="${param('tableName')}" /> <c:set var="idColumnName" value="${db.getIdColumnName(${tableName})}" />getIdColumnName() is a method of DbUtils class which is a help class. It seems that