How to use an external webcam instead of the built in on Sat A215-4757

I would like to connect a Genius webcam instead of the built in camera as to get better capture angles. Could intall Genius soft but the images still come from the built in camera. Tried to disable built in camera but enable Genius camera, but no images was shown.
Please any help, thank you.
Edgardo, buenos aires

Hi
What applications did you use to use the other external webcam?
Generally if more then one device was installed you have to choose and activate the right one.
The same happens if more printers are installed on OS. You have firstly to activate one and assign it as default.
Check if you can mark your external installed webcam as default webcam.

Similar Messages

  • I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

    I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

    A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
    I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
    Regards.

  • G'day.  I am using iMovie 11 and need to clear disk space.  How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

    G'day.  I am using iMovie 11 and need to clear disk space.  How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

    The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
    If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
    If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again.

  • How to use a bluetooth dongle instead of built-in BT?

    Just got an "Ultra Long Range Industrial" bluetooth dongle (BTD Bluetooth Dongle BT-6610).  I want to use it instead of the built-in bluetooth because it has a much longer range.
    How do I disable the built in bluetooth and enable the BT-6610?
    The dongle shows up:
    USB Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0aa7
      PCI Revision ID:          0x00b1
      PCI Vendor ID:          0x10de
      Bus Number:          0x06
    Bolutek BTD-6610:
      Product ID:          0x0001
      Vendor ID:          0x0a12  (Cambridge Silicon Radio Ltd.)
      Version:          59.41
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Bolutek Technology Co.,Ltd.
      Location ID:          0x06200000
      Current Available (mA):          500
      Current Required (mA):          200
    BRCM2046 Hub:
      Product ID:          0x4500
      Vendor ID:          0x0a5c  (Broadcom Corp.)
      Version:           1.00
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0x06100000
      Current Available (mA):          500
      Current Required (mA):          0
    Bluetooth USB Host Controller:
      Product ID:          0x8217
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:           1.80
      Serial Number:          xxxxxxxxx
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0x06110000
      Current Available (mA):          500
      Current Required (mA):          0
    Here are my bluetooth setting:
      Apple Bluetooth Software Version:          2.4.0f1
      Hardware Settings:
      Address:          xx-xx-xx-xx-xx-xx
      Manufacturer:          Cambridge Silicon Radio
      Name:          billbarnes
      Firmware Version:          5941
      Bluetooth Power:          On
      Discoverable:          No
      Vendor ID:          0
      Product ID:          0x1
      HCI Version:          4 (0x4)
      HCI Revision:          5941 (0x1735)
      LMP Version:          4 (0x4)
      LMP Subversion:          5941 (0x1735)
      Device Type (Major):          Computer
      Device Type (Complete):          Macintosh Portable
      Composite Class Of Device:          3670284 (0x38010c)
      Device Class (Major):          1 (0x1)
      Device Class (Minor):          3 (0x3)
      Service Class:          448 (0x1c0)
      Requires Authentication:          No
      Services:
      Bluetooth File Transfer:
      Folder other devices can browse:          ~/Public
      Requires Authentication:          Yes
      State:          Enabled
      Bluetooth File Exchange:
      Folder for accepted items:          ~/Downloads
      Requires Authentication:          Yes
      When other items are accepted:          Ask
      When PIM items are accepted:          Ask
      When receiving items:          Prompt for each file
      State:          Enabled
      Devices (Paired, Favorites, etc)
      Manufacturer:          Cambridge Silicon Radio (0x3, 0x10db)
      Incoming Serial Ports:
      Serial Port 1:
      Name:          Bluetooth-PDA-Sync
      RFCOMM Channel:          3
      Requires Authentication:          No
      Outgoing Serial Ports:
      Serial Port 1:
      Address:
      Name:          Bluetooth-Modem
      RFCOMM Channel:          0
      Requires Authentication:          No

    Hi X42:
    Your last paragraph intrigued me as I had the same impression:
      I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
    Actually, 30 feet is 10 meters. 
    Anyway, I researched and found this as part of a Wikipedia item:
    Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
    Class
    Maximum Permitted Power
    Range
    (approximate)
    mW
    dBm
    Class 1
    100
    20
    ~100 meters
    Class 2
    2.5
    4
    ~10 meters
    Class 3
    1
    0
    ~5 meter
    The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
    Apparently there are BT devices that will transmit about 300 feet.  I did look at the FCC site, but quickly became confused in the technbabble.
    Barry

  • How to use JOptionPane in jsp, instead of javascript message alert box?

    HI,
    How to use JOptionPane in jsp,
    instead of javascript "message alert box"?
    I hate javascript,
    I'd like to only use java in jsp. don't use javascript.
    javascript is client side,
    jsp is server side. i know that.
    how to... instead of javascript box?
    how to use ... message box in webpage?
    don't use applet,,,, don't use javascript,,,
    hm...zzzZzz
    I hate javascript..T.T
    <SCRIPT language=JavaScript>
    alert("hate javascript");
    </SCRIPT>
    ===>>>>
    In this way,,
    JOptionPane.showOptionDialog(null,"I love java")
    I'd like to only use jsp and java and html...in webpage.
    don't use javascript....
    Why? don't sun provide message box in jsp, instead of javascrip box?
    Why?
    Edited by: seong-ki on Nov 4, 2007 8:38 PM

    Drugs are bad, m'kay?

  • How do you get to use an animated finger instead of the cursor?

    Hello. I've seen in a screenshot video that a developer was showing how his app works by using an animated finger instead of the regular arrow (cursor). Does anybody know what's the name of that finger program/app?
    Thanks!

    Actually, i just found it. It's called PhoneFinger: wonderwarp.com/phonefinger/

  • Can I use an external Drum Machine with the drum sounds in Express?

    New to Logic Express and Midi. Can I create drum track patterns and whole songs using an external drum machine and the drum sounds in Logic Express? I'm sure I can, but I have no clue as to how. Can anyone point me in the right direction?

    shanec805, wttdaWelcome to the discussion area!
    Remember that Time Capsule is a hardware device.
    Time Machine is a software feature of OS X 10.5.5.

  • Is there an external webcam made for the original iPad?

    Is there an external webcam made for the original iPad?

    There was an iClops project for awhile, but the folks abandoned the idea, I heard for possible legal reasons.
    There is an app, Camera for iPad, that lets you use the iPhone's better resolution camera to take photos for other iOS devices. But it does not work with any video apps. I am not sure why I would take photos with an iPhone for the iPad, unless it was for later viwing on the larger display.

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

    I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

    Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
    If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
    If CS6, download at Other downloads and enter your serial number when prompted
    Again... your 1st resource is your school

  • Is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ?

    is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ? because i dont have that much memory and i wanted my external hard drive to be the source for my music files and not my computer.

    Many users keep their iTunes libraries on external drives. You just have to remember to connect and power up the drive before launching iTunes.
    iTunes for Mac: Moving your iTunes Media folder:
      http://support.apple.com/kb/HT1449 

  • If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

    If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

    yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

  • [svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

  • How to use setFireActionForSubmit with parameters and capture the parameter

    Hi,
    Can anyone explain how to use setFireActionForSubmit.
    I am extending the Controller of ShoppingCartPG. In the extended controller processRequest method I am adding a button to the table and setting up the setFireActionForSubmit, so when the button is pressed it raises the event associated with the setFireActionForSubmit.
    I need to pass the RequisitionLineId as a parameter which is present in the VO associated with the ShoppingCartPG.
    I have used the following code in processRequest
    =================================
    public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
    super.processRequest(paramOAPageContext, paramOAWebBean);
    OATableBean otbRN=(OATableBean)paramOAWebBean.findIndexedChildRecursive("ItemTableRN");
    OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
    oasb.setID("addnInfo");
    oasb.setUINodeName("addnInfo");
    oasb.setText("Additional Info");
    String pageName = paramOAPageContext.getRootRegionCode();
    Hashtable params = new Hashtable (1);
    params.put ("param1", pageName);
    Hashtable paramsWithBinds = new Hashtable(1);
    paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL(oasb, "${oa.encrypt.current.RequisitionLineId}"));
    oasb.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);
    otbRN.addIndexedChild(oasb);
    =================================
    And in processFormRequest method I am capturing the event "addnInfoEvent" and trying to capture the RequisitionLineId which I have passed it as a parameter.
    This is the code I have used in processFormRequest.
    =================================
    public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
    super.processFormRequest(paramOAPageContext, paramOAWebBean);
    OAApplicationModule localOAApplicationModule = paramOAPageContext.getApplicationModule(paramOAWebBean);
    String strEvent= paramOAPageContext.getParameter(EVENT_PARAM) ;
    if ("addnInfoEvent".equals(strEvent))
    Number localNumber = 0;
    try {
    localNumber = new Integer(ClientUtil.getDecryptedParameter(paramOAPageContext, "param2"));
    catch (Exception e) {e.printStackTrace();}
    String outmsg="Line ID : " + localNumber + ":" + strEvent;
    throw new OAException(outmsg,OAException.INFORMATION);
    =================================
    But I am not able to capture the RequisitionLineId which I have sent as a parameter.
    Can anyone let me know what I am doing wrong.

    Hi,
    This is the requested HTML Code
    ===============================
    <button id="N3:addnInfo:0" class="x7g" style="background-image:url(/OA_HTML/cabo/images/swan/btn-bg1.gif)" onclick="return _chain('submitForm(\'DefaultFormName\',1,{\'param1\':\'${oa.encrypt.current.RequisitionLineId}\',\'serverValidate\':\'1\',\'param2\':\'${oa.encrypt.current.RequisitionLineId}\',event:\'addnInfoEvent\',source:\'N3:addnInfo:0\'});return false;',*'submitForm*(\'DefaultFormName\',1,{\'_FORM_SUBMIT_BUTTON\':\'N34\'});return false',this,event,true)" type="submit">Additional Info</button>
    ===============================
    Hi I am not able to paste the HTML Code..some parts of HTML gets removed automatically when I paste it in the forum.
    Regards,
    Rohit

  • How to use common resource bundle across all the development components ?

    Hi,
    I am working on SAP NetWeaver Developer Studio - JAVA
    How to use common resource bundle across all the development components ?
    Description :
    I have a requirement of creating a resource bundle (resource.properties) and use that common resource bundle in all the development components.
    Can we create a  development component (war and ear both) and create only resource.properties in this development component( DC ) and create the dependency of the same DC  in all the other DCs ?
    Thanks,
    Neha

    Hello Neha 
    This question is more NWDS related.
    You may have a better chance of someone answering the thread under
    SAP Netweaver -> SAP NetWeaver Development Infrastructure (NWDI, formerly known as JDI) forum
    Thanks
    Kenny

Maybe you are looking for