How to use an SWF file generated by Flex as a Stand Alone file

Whenever we compile an MXML file, there is an SWF file
generated. This file is not a standalone file and will not work on
any other computer expect on the computer where there is a Project
file created by the Flex builder.
Why am I not able to use that SWF file as a stand alone file?
If I want to use that SWF file alone as in the SWF generated
by Flash what do I have to do?
Regards,
Rashmi

The swf file will run from anywhere. What's it doing when you
try to open it on another machine?
The only thing I can think of is if you're getting a security
violation in which case you would need to read about Flash Player
trust files and security.
-Mac

Similar Messages

How to use built in dictionary in Mac OS X lion on PDF file?

Hi there,
Does anyone know how to use built in dictionary in Mac OS X lion on PDF file with out using trackpad? Thank you.

I don't know what to tell you, it works perfectly for me...
My expertise ends here... Hopefully someone else comes along with useful suggestions and tips.

Any tutorials on how to use the daily build of the Flex SDK to create Flash Player 10 content?

Is there a tutorial on Adobe on how to use the daily build of
the Flex SDK to create Flash Player 10 content?

The approach you take might depend on a few things, but it boils down to using mouse interactive coding to trigger whatever effect you eventually realize. The code you use will depend on the version of Actionscript you plan to use.
You could make this as a movieclip that is normally stopped at its first frame and when you mouseover or click the movieclip, it animates along its own timeline to its enlarged state. If the thumbnail is very small and the larger version is substantially larger, and both need to be clear images, this might be the better approach.
If this only involves enlarging something, you could also probably realize it just using Actionscript Tween coding rather than timeline animation.

How to use a swf file in java

plz any body tell me about this
that how to use SWF in java (JFrame)

I suggest you look in google http://www.google.co.uk/search?q=SWF+java

How to use application builder to generate installation disk without compiling the the support files?

Hello,
What I am trying to do is to use LV application builder generating an installation disk without compiling the support files. I mean:
the support fils like the help files are located on a different directory , for example, installation disk is D drive, help file directory is: D:\Help\..., not compiled in the installation Data set.
So, when the installation disk is running, it only copy this directory file into the destiny directory. Of course, we can write a different bat file to do this. However, beside this method, is there any way, like using LV application builder to do this without writing a batch file. Any suggestion will be appreciated.

For LabVIEW 7.1, this can be done in a few short steps. First, add your help file as a support file in the Application Builder. Then go to the Installer tab, choose to create an installer and click on the Files button at the bottom. From this dialog (shown below), you can specify the destination for each component in your install package. If you have added your help file as a support file, it will show up in the Files in Installation list. Click on your help file to highlight it. You can now choose where to install the file to by specifying an installation destination and a subdirectory. The default subdirectory is called data, but if you want to change that, just type in a new subdirectory name as I have done below:
Hope this helps!
Message Edited by Jarrod S. on 01-23-2006 10:17 AM
Jarrod S.
National Instruments
Attachments:
Support Files.JPG ‏31 KB

Any one know how to use "custom" option present under the data access tab in XLS file format of Data Services

Hi Experts,
Any one know how to use or what is the purpose of "custom" option present under the data access tab in Excel workbook file format of Data Services
Thanks in Advance,
Rajesh.

Rajesh, what is the Custom Protocol you are trying to use? It should be something like PSFTP, etc.,
Cheers
Ganesh Sampath

How to embed a swf in Catalyst. (don't know where to associated files etc.)

I'm trying to embed a 'canned' swf package on one of my FC states. No problem dropping the swf on the
page (I did find out AS2 doesnt work, but AS3 does )
When I run the project I get a message saying it cant find an associated xml file.
The package has the swf, an image folder, an index.html, a .js file and an xml file. I don't know where to put these to get it to work. Tried it locally and on my server. I'm running panini and burrito.
Thanks,
Andy

You are going to need to recreate the directory structure that 'canned' swf is looking for beneath the Flash Catalyst output. If I am not mistaken, the swf will be inside an assets directory. Try placing the xml file in there.
Good luck.

How can I publish a stand-alone file with Captivate 8?

I have just downloaded the new Captivate 8, but I an not sure how to publish a stand-alone, interactive file now. In previous versions, one could publish an .exe file that didn't require a browser to work. In the new version, there appears to be two options: HTML 5/SWF or video. The video option publishes a .mp4. Is there still a way to publish a .exe?
Thank you!

Frankly I am a little tired of Adobe stonewalling on the issue of removing exe and dmg publication facility from Adobe Captivate 8. What a load of flimsy excuses from Adobe!!!! In Cap 7 I exported to exe and dog all the time and I truly miss this facility. Why does Adobe remove a perfectly good facility when upgrading?
It all makes me believe that Captivate 8 was rushed out without much thought other than to get a 'not working correctly' responsive design bit built in. Did they not think about customer research?
And so, I've just paid over £300 to upgrade to a version of Captivate (8) I won't be using much. This disgusts me and I am sure I am not alone.
And yes, why is Captivate not part of Creative Cloud? I ask this question and I have asked it before. Adobe will NEVER answer this question.
Adobe. Please try and LISTEN to what your customers are saying.
Richard Broom

I have a BT home Hub 3 with standard BT broadband(no infinity), how do I set up an Apple AirPort Extreme without a stand alone modem? Can I use my current Home Hub

I want to use an Apple AirPort Extreme as my home router but at present I have standard BT broadband using the BT Home hub 3. Can I connect them in some way so I don't need to buy a stand alone modem.
IS THIS POSSIBLE???
1. Would Apple AirPort Express be better and easier?
2. What modem would be suitable if I can't do it any other way?
I AM CURRENTLY USING MY INTERNET WITH PS3,WINDOWS 7 LAPTOP, IPAD AND IPHONE!!!
Any help would be greatly appreciated.
Thanks
John smith

You said that you wanted the layout to look like this:
AT&T 2WIRE Router (wireless off) ---> AirPort Extreme ---> NetGear 16-Port Gigabit Desktop Switch ---> ethernet cabling to ports in most rooms --->
So, we took that at face value....,.but it could look like this if things are more convenient this way, if you prefer:
AT&T 2WIRE > Ethernet Switch > AirPort Extreme and other devices.
- If we include an AirPort Extreme in the overall network setup, are there any potential issues with the 2WIRE router and the AirPort Extreme router "competing" with one another?
No, if you leave the wireless function off on the 2WIRE. If you do want the utilize the wireless on the 2WIRE and the AirPort Extreme, then you want to keep them physically separated by 6-8 feet, or a few meters.
- Do I really need an AirPort Extreme in the final setup?
No, if the AirPort Express will provide enough range for the network.
Or if I just want an extra WAP, can I operate two AirPort Express units (with the same SSID) downstream of a 2WIRE router?
Yes, if both of them are configured to operate in Bridge Mode. If you are using the "wizard" setup utility in AirPort Utility 6.x, the wizard will do this for you automatically.
That is to say, could we have a setup that looks just like the image above, but with an extra AirPort Express tacked on to one of the unused ethernet ports?
You can have as many AirPort Express devices (or AirPort Extreme devices) as you want, as long as each has an Ethernet connection back to the switch.

Code behaves different when SWF is in browser as opposed to stand alone player, why?

In ActionScript, I have some code that dispatches a
MOUSE_OVER event when a tween is complete. I am using Tweener for
the tween. On my Mac OSX machine, I preview the SWF file in a stand
alone player spawned from my Flash IDE, and the event is dispatched
and the behavior works as expected, but when I preview the SWF file
as embedded in a MacOSX browser, the event is not dispatched. On a
Windows machine, however, the event is dispatched both in a stand
alone player and within the embedded SWF file in a browser. The
problem seems to come particularly from the Mac OSX player.
Has anybody ever experienced this? Is the OSX implementation
of the Flash player different in a stand alone and browser setting?
Here is the code that I am using:

HMMM! Verrrrrry interesting.
Yes file size is an issue, it's a large project.
Exterenally host it?
Where could I go and do that?
I'm not familiar with this process. Can you please tell me exactly how it works?
And....that means both servers need to be up and running? Kinda sounds a bit shakey. This project needs to be strong and stand alone to go here and there. Durable.
I feel safer if its all in one piece. Bam.
You know, I noticed "FAST" and "BEST" does not make a difference to file size or quality.
Could I be wrong?
Thanks.

How to use pdf annotation data generated by Digital Edition to different Pdf reader?

Hi,
I am working on an application which is suppose to use Adobe Digital Edition PDF annotation data in another pdf reader.
Using Digital Edition Annotation Data we need to generate highlights and notes.
My question is : How we can read this Adobe Digital Edition annotation data to generate highlight and notes in different reader.
E.g of annotation data:
http://codebeautify.org/xmlviewer/32b3b7
Thanks
Mrityunjay

HI,
Try this Standard program
RSTXLDMC --> Uploading TIFF Files to SAPscript Texts
Regrads,
S.Nehru

How to use the ITS Theme generated by ITS Theme generator of Portal

Hi,
I have generated an ITS Theme using ITS Theme generator of Portal. I exported the theme . It is a zip file containg some xml files and two zip files - Portal and ITS. When I unzip ITS.ZIP I have webgui folder under which there is ma and sa.These folders have various images.
Now how do I apply the generated theme.
Regards,
Harish

Hi Edgar,
Thanks for responding. Yeah I looked at that documentation earlier and these are the activities we have done so far:
1. Using ITS theme generator in portal, generated ITS theme for our custom portal theme.
2. Verified from theme export that ITS.zip contains all relevant images, stylehsteets etc for our custom theme.
3. Even after this, when we preview transaction iViews from portal to execute a transaction on ECC system those iViews pick up default SAP theme but not our custom theme.
4. After looking at the OSS notes mentioned in help documentation, we used ~webTransactionType, ~design & ~designBaseUrl parameters in iView properties but no luck. Actually these parameters get ignored - even if we put invalid host name in designBaseUrl it doesn't throw any error.
We use EP 7.0 SP 17 and ECC 7.01 Ehp4 with integrated ITS. When we generated the theme using ITS theme generator in portal, we tried with service as webgui and also sap_generate but the iViews pick up only default SAP theme. How do we point ITS webgui and transaction iViews to custom portal theme?
Thanks for your help!
Veda

How to use the column names generated from Dynamic SQL

Hi,
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
Please find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
OPEN insert_csr FOR CASE
WHEN v_where IS NOT NULL
THEN 'SELECT '
|| v_select
|| ' FROM '
|| v_table
|| v_where
|| ';'
ELSE 'SELECT ' || v_select || ' FROM ' || v_table || ';'
END;
LOOP
v_ins_query :=
'INSERT INTO '
|| v_ins_tab
|| '('
|| v_insert
|| ') VALUES ('
|| How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
Please help me out with the above problem.
Edited by: kumar0828 on Feb 7, 2013 10:40 PM
Edited by: kumar0828 on Feb 7, 2013 10:42 PM

>
I Built the statement as required but i need the column list because the first column value of each row should be inserted into one more table.
So i was asking how to fetch the column list in a ref cursor so that value can be inserted in one more table.
>
Then add a RETURNING INTO clause to the query to have Oracle return the first column values into a collection.
See the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/returninginto_clause.htm#sthref2307

How to use the function module which i mentioned, to store the pdf files

hi,
SO_NEW_DOCUMENT_ATT_SEND_API1
I am using above function module to send employ details through mail in pdf format, if i want to store that pdf files in a local computer too, then how should i catch hold off those individual pdf files of all employees, plz help me out with a sample code

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

How to use Javascript, C#, or Java to automatically fill out a PDF file using ACROBAT PRO

Hi.
I have purchased a copy of acrobat pro and am currently using it to try to create a method of populating certain fields in a PDF file.
This particualar scenerio is a printable cerficiate, it has a spot for the persons First Name, Last Name, and other basic info.
So we have an exisiting editable PDF, a database with the user's info, and a ASP.NET web server, and of course Acrobat Pro.
How can I use these components to create an auto fill script?
Ideally, we'd genereate these certs on the fly, and allow users to download them.
A code sample would be awesome.
Thanks!
--shawn

I've discovered that you can create a "PDF Form" and edit that form with Javascript.
My question now is, what is the prefered method for controlling the pdf form?
I would like to include the PDF file in an HTML page and edit the form fields using javascript in that HTML page.
I think that this is how developers are meant to work with dynamic pdf files.
In the acrobat javascript reference, it only shows an example using the acrobat javascript console.
If anyone has used Javascript with PDFs, I would highly appricate some input.
Thanks,
-- shawn

How to use an SWF file generated by Flex as a Stand Alone file

Similar Messages

Maybe you are looking for