How to use anchoring tool in Reports 6i

Hello,
Can any one help me to how i can use the anchoring tool in 6i reports and what are the properties to be set to it.
Thanks & Regards,
Dinesh .M

Hi Dinesh,
Anchor defines the relative position of an object to the object to which it is anchoredand they are used to determine the vertical and horizontal positioning of a child object relative to its parent. Since the size of some layout objects may change when the report runs, you need anchors to define where you want objects to appear relative to one another.

Similar Messages

How to use pen tool in Adobe and Illustrator?

How to use pen tool in Adobe and Illustrator?

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How to use bind tool in flash

i'm using flash cs5.5 . i have a problem with bind tool. how to use it.i'm trying lot of times, but i can't find how to use bind tool.please any can help me with a helpful answer.

Hi Sampath,
Please use this Help article to learn how to use Bind Tool.
http://help.adobe.com/en_US/flash/cs/using/WS58BD3A02-DA25-488f-B534-AE5463A24833.html
Please let me know if you would need more help.
Thanks,
Suhas Yogin

Hi Any body Knows How to use CAT Tool for Up Loading?

Hi
If any body knows how to use CAT Tool for up loading transactions, explain the steps.
Our requirement is, we want to up load transactions like Oppor , Quotation,Order etc...we want to up load these transcations from Local system to CRM Server
how to do this? Let me know the steps.
Regards
Venkat

If you have 10,000 or less, CATT is a reasonable method, but I would suspect that you have far more than that if you're needing to load transactions.
LSMW is probably a better way to go if you have more than 10k, but I am not familiar with LSMW

Hello how to use nativetoacii tool

hi,
iam unable to display the properties file labels which are in arbic properly..i created a properties file called MessageBundle_ar_AE.properties and saved it as UTF-8 formatt..i read soeme where that we have to use nativetoacci for displayingn them correctly..can any body tell me how to use this tool..for my above file..i need synatx for this..
Regards,

Look on your computer. Under the directory where your JDK is installed you'll find a "docs" directory. Under that there's a "tooldocs" directory and in that there's a file "tools.html". Look in there.

How to use eyedropper tool?

Hi Everyone,
How to use eyedropper tool?
Please describe to me.

Hi, yes sorry I mean colour overlay.
Here's an example. If you fill a layer with the paint bucket tool using red. And then give that same layer a 'colour overlay' of blue. When you use the eye dropper tool it will give you the red colour. I was just wondering if there's a key I can press at the same time as using the eyedropper tool that will set the foreground colour (2 squares at the bottom of the tools toolbar) to blue in this case, rather than the underlying red.

How to use Xcelsius tool in Desktop applications

Hello
This is shankar, from IMS CRM4 team in SAP. We have a requirement for interactive anlalytics in our product and found that Xcelisus is the correct approach.
Can you please clarify the following
1. How to use the Xcelsius tool in desktop applications.
2. Is Xcelsius Viewer free version available which can used only to view the interactive analytics. Xcelsius designer is not required for all the users.
Thank You
Shankar

Hello Victor
Thank you for your inputs !!
Point 2 is very clear to me that we do not need any additional software to run the SWF files.
We have CRM Mobile offline product with Crystal reports integrated already. CRM Mobile Offline solution is a desktop application and there is no intutive analytics.
So i would like to know more on how to link the data (Excel or XML) to Xcelisus tool and get the output SWF file. Can it be done through the command line (without using Xcelsius designer) ??. Do we need to have any licensed version of Xcelisus for this task??
This will promote both our prodcut and BOBJ Xcelisus prodcut as well
Regards
Shankar

How to use lexical parameter in report

i want to use lexical parameter in report and pass parameter from form how it is possible in detail
A.R

Hi,
typically you fill your lexical paramter in the after-paramform-trigger out of the values of your bind-parameters (giving end users directly control over lexical parameters might not be a good idea). Inside PL/SQL a lexical parameter is referenced like bind parameters with ":". In the query it's referenced via "&" and represents a part of the query.
A simple example.
- p_deptno as bind parameter
- p_where as lexical paramter
- end user choose value for p_deptno (10,20,... or nothing)
- Trigger: if :p_deptno is not null then
:p_where := 'WHERE deptno = :p_deptno'
else
:p_where := null;
end if;
- Query select ... from emp &p_where
Regards
Rainer

How to use Value Variable in Report Painter Column defined as Formula

Hi Gurus,
In report painter, how can I add one field (exchange rate) in selection screen, so that user can provide the exchange rate to be used, then execute the report, the exchange rate will used to multiple local currency amount.
The reason for this is we want use provided exchange rate to convert the amount from once currency to the other currency.
Alternatively I am studying the functionality of "Value Variable" and found that I can perform the task from this. I have created the value variable but when I am using the variable in Report Painter columns as "&ZVALVAR", system is giving me error. I read the help and it states that use the variable with "&" and do it as it is mentioned.
Can anybody suggest what I need to do to make it workable.
Thanks

I did try using the presentation variable, but that does not work too. I am setting session variable in the dashboard prompt (select 'request variable'). When I use presentation variable, it hard codes the value of the variable name.
sql is
select date from work_order where facility = @{p_facility}
the physical log sql is
select date from work_order where facility = 'p_facility'

How to use the repository; uploading reports from DEV to PROD...

Hello...
I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0. I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report. I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD. We have BOE.
Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc.. What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD! We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc. (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc. Thanks!

Hey Markian,
Can you let me know the process you have followed to migrate from Dev to Prod.
We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
Just follow the above scenario and let us know if you are facing any error.
Try publish the reports using import wizard and run it in the crystal designer.
Regards,
Naveen.

How to use awr and addm reports

Hi,
to use awr and addm reports does we should have separate license or oracle server software license is enough.
which tool do we use to read this awr and addm reports in real time.
please give your valuable suggestions.
thank you!

Seeing as you seem to want to continue the discussion on someone else's old thread rather than your own one
AWR files in oracle
If i don't then it is difficult to find the queries thata re related to my application as most of those are the sysqueries, i just need schema specific queries in the SQL ordered by Elapsed Time section. Perhaps you are using the wrong tool?
A system-level report like AWR or ADDM is no use to you as it seems your application code is not significant at the system level.
You might want to consider tracing the sessions from your application using client_id or module to identify sessions belonging to your application then possibly use TRCSESS and TKPROF.

How to use Connection pool in Reports

Dear All,
Please help me How to create Connection pool for Reports and How to use in Reports.
Present i am using the report by passing parameter as P_JDBCPDS=username/password@databaseName. I thought this will not manage the coonection pool.
For all reports and every time i am passing userName/password, how to avoid this. Please help me.
1. How to create Connection pool for Report Server
2. How to use that Connection pool in the Reports.
Please help me.
With Regards,
Srinivas.

Until now, I have not worked unfortunately with a connection pool, but, I have found a documentation about the Creating an Internal Connection Pool.
http://download-east.oracle.com/docs/cd/B25221_04/web.1013/b13593/cpdef.htm

How to use bone tool without getting my vector/object distort?

Wish to get some help here. I drawn my human body figure using pen tool. I connect the bone tool directly without separating the part of (hand,legs and head) into symbol. After that, I try to move the hand but it get distort. Not just the hand but the body and head also getting distort as well. Do we need to necessary convert the body parts to symbol first before connecting the bone? Thanks.

> So, is it right if I say that the services available in the backend are already implemented? And just creating an endpoint for them would make them ready for use?
Yes: kind of instant services
> Also if I consume a service, say, 'CreateSalesOrder_In' for example, will it create entries in all my Sales order relevant tables (VBAK, VBAP) automatically using a BAPI internally?
The service has the task to do all necessary steps, whether with or without using a BAPI.
> Actually, I have these doubts because during my time at SAP Labs (for the composites team in BusinesByDesign), I used to create business objects in the ESR and create an implementation for the same in the backend using BOPF. But now, in the customer scenario, where a full fledged ECC implementation is used, I am unaware as to how the services would update the tables or even read the relevant data.
My consumer view on aservice is that I do not have to know how the service works, just need to know how to call it.
Regards, Boris

CS6 how to use gradient Tool for outline

Hi!
I am a graphic designer I like to work hand and not numbers. The new version of Ai CS6 gradients can be given for strokes. Great!
Please help me how exactly I can do it with a convenient tool 'Gradient Tool'?
Does not respond to changes in drag when I try to use the mouse to outline?
In advertising and instructions CS6 somehow strange is described ... I do not understand.
http://helpx.adobe.com/illustrator/using/gradient-panel-gradient-tool-overview.html
Regards!

@Ivan David: Thank you for your response. I asked for something else. How to use the "Gradient Tool" no gradient palete. Why are chceck "ON" you own answer as helpful?
As I explained I am a graphic designer will create a hands than numbers. I do not understand why no tool "gradient tool" works to fill but it does not work on outline.
If I get a chance to show off with a representative of Adobe's a bit like crying...
We need fair and real changes. According to me the most to do is to think about using Illustrator for themselves of their creators Illustrator.
* For example in work with new gradient tool.
- Why when you edit the gradient for the outline of the object is displayed slider gradient fill???. It's confusing and totally unnecessary.
- Why is the Gradient Tool Outline tool does not work???
- Why Control bar does not drop the Gradient icon??? What is the control bar when no controls? Control Bar cool idea but how would the developers were thinking of him as a stranger?
- Why still the option of working with the gradient tool to fill, when you edit a color marker, I can not turn on the Eyedropper tool to select a color from another object???
- Why does the apperance in the attributes panel stoke attribute does not appear easy gradient of a potential of gradient palette???
- Why can not I fast copy between objects only attribute gradient???
After all, it's easy and does not require a great job developers reach a solution to the function. I know that my naive questions now, and nobody I will not answer to them but sorrow grows. Sometimes I feel like a fly in pitch.
This is not normal.
So many years have passed, there was a lot of new tools but Adobe wants to use the same techniques as in his first product. Refresh in the new 64 bit version is also not so different to that in compared to regular equipment and are currently using...
http://www.youtube.com/watch?v=N3TDmvZma84
Sorry for the harsh words of criticism, But your answer is a perfect example that Adobe does not know what's going to people who work with Illustrator on a daily basis and as can be seen starting to irritate me tight.
Perhaps I have exaggerated expectations about the tools Adobe. I understand that there is so much work and needs, but I lack only a change of thinking about working with tools in Illustartor and reducing unnecessary clicks. Now, instead of tools to work with each other often exclusive and force running around.
Regards!

How to use javadoc tool?

I am new to Java, I thought you have to manually write all the java doc comments into your source code of java application. Some one told me javadoc tool can actually automatically add the comments for you. so I tried to that with my simpliest HelloWorld.java file, but got following errors:
A:\>java HelloWorld
Hello World I am back in again,
and I WILL make it this time!
A:\>javadoc HelloWorld
Loading source files for package HelloWorld...
javadoc: No source files for package HelloWorld
1 error
A:\>
Can you help me explaining how to use automatic javadoc tool?
Thanks,
Ken

This GREAT! it worked and added bunch of .html files
into my curren directory with my HelloWorld.java.
So, it will NOT add text doc comments into my
HelloWorld.java source text code correct?
Thanks, KenThat's correct - after all, how does the tool know what you want to say in your source code unless you tell it?. There are IDE's that present a GUI interface that will make it easier for you to enter your comments, but you still have to put in the comments. Also, Sun has some style guidelines on how to document your source code that might interest you:
http://java.sun.com/j2se/javadoc/writingdoccomments/index.html

How to use anchoring tool in Reports 6i

Similar Messages

Maybe you are looking for