How to use AP Express while my TC is being repaired

I have a Time Capsule (Mk 1) network with an Apple Express MB321LL/A extension. But now the Time Capsule 500GB HD has failed and I need to take it to then nearest Apple Store (50 miles away) for HD replacement. When I disconnect Time Capsule, I lose the network. What do I have to do to be able to run a network from the Apple Express alone while the TC is in the shop?

I suppose that means that I'll be setting up a new network with it's own name and PW.
If you review my post, you will see that I said that you can assign the same wireless network name and password that you used before if you wish. Or, you could assign a new name and password if you wish.
And when I get the TC back, will it have forgotten the original network
That depends on what repairs are needed to your TC. If only the hard drive is replaced, then the TC will remember its previous settings. If other repairs are involved, you should expect to have to reconfigure the TC again, just as you did when it was new.

Similar Messages

How to use SQL() function while writing scripts in BODS 4.0

How to use SQL() function while writing scripts in BODS 4.0

Hello,
I think you want to post your question to the [Data Integration and Data Quality Management|Data Services and Data Quality; forum. This forum is for other BusinessObjects SDK development questions.
Sincerely,
Dan Kelleher

Mac Rental While My Mac is Being Repaired?

I can't seem to find the answer to this question anywhere so I'm guessing it's not available... but I just want to make sure. Does AppleCare provide a rental Mac while your Mac is being repaired? Thank you.

Not a rental but AppleCare does provide a loaner while your computer is being repaired. _*However, it depends on the situation.*_ Are you a student or use your computer for busines purposes?
You can make arrangements through Customer Relations for a loaner/replacement 1-800-767-2775.
!http://i45.tinypic.com/jl0z95.jpg!

How to use regular expression to delete a character?

Hello,
I have a query,
select partition_name from dba_tab_partitions where table_owner='xxx'and num_rows <>0 and table_name = 'xxx';
P5
P6
P7
P12
P13
P14
P17
P18
P19
P20
P24
How can I use regular expression in above SQL query to get result without letter 'P', like..
5
6
7
12
13
14
17
18
19
20
24
thank you

I find answer...
select regexp_replace(partition_name,'P','')
thanks anyway

How to use Regular expression

Hi,
I have a file that contains this format (separated by ;(semicolon) ):
user id;user name;email address;password;integer;list of integer(separated by ,(comma))
below is the example data :
abc;Abc;[email protected];password1;1;1,2
def;Def;[email protected];password;2;1,2,3
ghi;Ghi;[email protected];password;2;1
my question is how to verify the valid input for each row using regular expression..? TQ

@Op. Doing a correct validation of e-mailaddresses
is very hard using regular expressions (doingbasic
validation is however easy)
http://www.regular-expressions.info/email.html
I like the RFC 822 compliant regexp :)

How to use regular expressions to generate test data ?

Hi
Someone can help me on what I have to do in order to create test data with regular expressions ?
For example, I want to introduce a random telephone number (XXX-XXXX) in the phone number Form Field, I want to create the phone number using regular expressions in order to test different values in each playback of the script.
I don't want to use VB or vbscript in e-tester, I'm just trying to do this with e-load nav editor and e-load
Thanks a lot

Hi and thanks for your answer!, it's a great trick ^_^
I'm doing a research on how to improve the execution speed of the scripts in e-load, so actually I'm trying to avoid the use of databanks and VB code also.
I was expecting that maybe e-load, e-load nav editor or e-tester can automatically generate test data via Regular Expressions. Someone Knows if this is possible ?
Also can anyone tell me what the option "Automatically Generated (complex)" means ? I think that this will help me a lot
*you can find this option in e-load Nav Editor when you select a parameter in the tree view, then go to the "type" listbox in the properties pane, there you will find this option and some more options like :"Databanked variable", "Custom Dynamic Value", "Function".. etc.
Thanks again

How to use Airport Express as a sound output device

Guys,
Is there a way that I can use Airport Express as a sound output device? So, I can play all the sound on my HIFI.
thanks in advance

In order to listen to the non-iTunes audio streams through your Airport Express you will need to use the third party software Airfoil.
http://www.rogueamoeba.com/airfoil/
iFelix

Can u just tell me how to use leap motion while using lappy & other apps also

I hv bought HP envy leap motion few months back and i m not able to understand leap motion features.I've seen many videos about the features but i m not able to do it.Plzz help me

Hi
>> U need to go through documents and also videos
>>the first link that i have mentioned is how tio use
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03981766&lc=en&jumpid=reg_r1002_us...
>>the second link a review of video which ill help u
https://www.youtube.com/watch?v=478LbUj_zvs
>>hope these documents helps u to find how to work with leap motion
I am an HP employee

How to use 'IN' expression for SQL in DB adapter

Hi,
I am working on BPEL PM 10.1.3.3 and need to configure db adapter to get multiple values for one parameter similar to " where deptid in ('1,2,3)".
While configuring the adapter I am not able to find any such option. Also I need to use custom SQL. I have already tried SQL given below
select deptname from dept where dept in (#deptID)
This type of SQL generates an error. I am sure there should be a way to achieve this but donot know how to :(
-AAg

This is not possible. You should program on advance the amount of IN paramaters
IN (#p1, #p2, #p3, #p4)
or
IN (#p1, NVL(#p2, #p1), NVL(#p3, #p1), NVL(#p4, #p1))

How to use a Parameter while polling a table (DB Adapter)

Hi
BPM 10.1.2.02
my bpel process polls a table for changes. i need to trigger the process only for specific data.
ex - i need to pickup data only which have a modified date of today (ie sysdate), how do i accomplish this ..the only 2 options im getting in EDIT EXPRESSION is Literal and query key.
if this is not supported by BPEL the work around for this is to create a view on the table but i saw the following in HELP but could not figure out where its comming from ....i dont see the "Parameter " option in the db adapter config.
Choose the expression and enter data in each field: First ArgumentClick Edit and select the query key for the first argument. See "Adding Arguments" for more information.OperatorSpecify how TopLink should evaluate the expression. Valid operators include:Equal Not Equal Equal Ignore Case Greater Than Greater Than Equal Less Than Less Than Equal Like Not Like Like Ignore Case Is Null Not Null Second ArgumentSpecify the second argument:Literal - Click Edit and choose a literal type and value. Query Key - Click Edit and select the query key.Parameter - Choose a previously created parameter argument.

Mahima.
You have almost same statement as Sundar has. This is not Bind variable as William said you can not use bind variable for structral name. this dynamic sql but withid bind variable (that is not USING the USING clause)
somthing like this
excecute immediate 'select * from emp
where empno=:1' using 10;here :1 is bind variable

How to use Airport Express to extend range in conjunction with Belkin N Wireless Router

I would like to know how I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express? I saw a similar post to this question but the results talk about using this in conjunction with time capsule - I only have a Belkin router and the Airport Express.
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

Thank you for your quick reply. Can you please expand upon how to set up the 'bridge' mode?
I tried connecting the AE via Ethernet from the Belkin router but was not successful in being able to get any additional coverage. I feel like I am missing a vital set of instructions with set-up/configuration details.
Thanks again.

How to use regular expression to find string

hi,
who know how to get all digits from the string "Alerts 4520 ( 227550 ) ( 98 Available )" by regular expression, thanks
br, Andrew

Liu,
You can use RegEx as
d+
Whether you are using CL_ABAP_REGEX class then
report zars.
data: regex   type ref to cl_abap_regex,
      matcher type ref to cl_abap_matcher,
      match   type c length 1.
create object regex exporting pattern = 'd+'
                              ignore_case = ''.
matcher = regex->create_matcher( text = 'Test123tes456' ).
match = matcher->match( ).
write match
You can find more details regarding REGEX and POSIX examples here
http://www.regular-expressions.info/tutorial.html
a®

How to use regular expression using pattern and match concept for this scenario?

Hi Guys,
I have a string "We have 7 tutorials for Java, 2 tutorials for Javascript and 1 tutorial for Oracle"
I need to replace the numbers based on the below condition.
if more then 5, replace with many
if less then 5, replace with a few
if it is 1, replace with "only one"
below is my code, I am missing the equating part to replace the numbers could any one of you please help me out fixing this.
private static String REGEX="(\\d+)";
private static String INPUT="We have 7 tutorials for Java, 2 tutorials for Javascript and 1 tutorial for Oracle";
//String pattern= "(.*)(\\d+)(.*)";
private static String REPLACE = "replace with many";
public static void main(String[] args) {
// Create a Pattern object
       Pattern r = Pattern.compile(REGEX);
    // Now create matcher object.
       Matcher m = r.matcher(INPUT);
       //replace the value 7 by the replace string
//How to equate the (\\d+) greater than a number and use it the below code.
              INPUT = m.replaceAll(REPLACE);
       //Print the final Result;
        System.out.println(INPUT);
Thanks and Regards,

Hi,
Try the following which makes use of "appendReplacement" instead with the "start" and "end" methods to locate and check the searched "regExp" string before dynamically setting the "replace" string:
String regExp = "\\d+";
String input = "We have 7 tutorials for Java, 2 tutorials for Javascript and 1 tutorial for Oracle";
String replace;
Pattern p = Pattern.compile(regExp);
// get a matcher object
Matcher m = p.matcher(input);
StringBuffer sb = new StringBuffer();
while (m.find()) {
   Integer x = Integer.valueOf(input.substring(m.start(), m.end()));
   replace = (x >= 5) ? "many" : (x == 1) ? "only one" : "few";
   m.appendReplacement(sb, replace);
m.appendTail(sb);
System.out.println(sb.toString());
HTH.
Regards,
Rajen
P.S: Please mark the post as answered/helpful if it resolves your issue for the benefit of all community members.

How to use AirPort Express over a dorm network

Hi,
I used my AirPort Express at home to add wireless to my existing home network and it worked well.
However, I can't get it to work here so I'll give you every detail possible in order for you to explain me how to configure it. A million thanks in advance. (I'm giving you the specific address just to illustrate it better)
I can only use one IP address on the network which is 192.168.1.25
The subnet mask is 255.255.255.0
The default getaway is 192.168.1.1
The preferred DNS is: 195.235.113.3
The alternate DNS is: 80.58.32.97
Do I have to put the AirPort Express IP address as 192.168.1.25? And can I use any range of DHCP IP addresses or I must use 192.168.1.x?
Thanks for helping me guys

You need to use NAT in order to share the single IP address.
If you had two (one for the AX and one for your computer) then you wouldn't need to use NAT.
On the Internet Tab use the following.
Connect using Ethernet
Configure Manually
IP address 192.168.1.25
Subnet mask is 255.255.255.0
Router Address 192.168.1.1
DNS 195.235.113.3
80.58.32.97
On the Network Tab
Check Distribute IP addresses
Share a single IP address using DHCP and NAT
I would use 10.0.1.x addressing
On the Airport Tab
Change Wireless Security
Use WPA
Use a password like this
45fs6ue6v1d5fg7d55dsg555
You may need to add the DNS addresses to the clients in order to access the internet.
This may not work, and I would in fact advise talking to your campus network people instead.
iFelix

Anyone know how to use airport express to bring internet to a powermac G5 model power PC G5 using airport express?

I bought an airport express and was told that I can configure it, and then move it to the G5 and connect it with the ethernet cable giving the G5 access to the network. But the laptop I first configure it to loses the connection once I remove the ethernet cable between the airport express and the modem. When I connect the G5 to the airport express nothing happens. Any ideas?

Hello Ed,
Is this how you set it up?
http://www.apple.com/airport-express/
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

How to use AP Express while my TC is being repaired

Similar Messages

Maybe you are looking for