How to use AppleScript with AccountEdge for printing?
Hi all,
Can AppleScript be used to print an AccountEdge invoice to a folder, quit this invoice, then increment the number of invoice to be opened by +1 and repeat the procedure with this invoice too? I am new to AppleScript and not familiar with its limitations.
The version I'm using is AccountEdge Plus NE 2010. I also found this link to sample scriptswww.accountedge.com/updates/ but cannot unfortunately access it as I'm outside the US.
I would be very grateful for your help. Thank you very much!
When you run a script like that from Applescript the environment it runs in is not the same as when you run the command from the terminal. Specifically where the file is being written is not where you think.
Try giving a full path to the output file say -0 ~/quotes11272013.txt to force the file into your home folder.
Post back if you still have problems
Similar Messages
-
Deskjet 6988dt, how to use photo/envelope slot for printing 4x6 photo paper?
Windows 7 Home Premium 64-bit OS. Printer has the extra250 sheet paper tray. Upper and lower tray work fine. I can of course load photo paper in upper tray and print photos from there, but I was trying to load just one sheet of photo paper in the little slot since I don't want to have photo paper loaded all the time. Since I have to use the generic Windows driver for this printer as HP doesn't have a driver update for this printer and Windows 7, the only selections I'm seeing in printer properties is "automatic, upper, lower". I've tried all three of those settings and none take the paper from the little slot where I'm manually feeding the 4x6 photo paper. What am I doing wrong? Could it be that this feature just isn't enabled with the generic Windows driver?
The reference/instruction documentation that came with this printer is very sparse. I can't find any instruction on how to use the photo/evelope slot. In fact I'd say overall the documentation is very poor.
I just checked the HP site, still no Windows 7 64-bit driver available.
Thanks for any help or ideas.Found a .pdf document on line for the Desjet 6980 series printers. Much more comprehensive than what came with the printer.
http://h10032.www1.hp.com/ctg/Manual/c00591373.pdf
Follow these steps to use the photo/envelope feeder to print a single photo:
1. Insert the photo paper into the photo/envelope feeder with the side to be printed on
facing down.
2. Gently push the photo paper into the photo/envelope feeder as far as it will
comfortably go.
3. Slide the photo/envelope feeder forward as far as it will go.
4. Print the photo.
Problem was, although I was inserting the 4x6 photo paper into the feeder, I wasn't pushing the little plastic slide forward. -
How to use wsit with jeveloper for developing and testing web servises
hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
TiminBoth Axis and WSIT are not Oracle products - so I'm not exactly sure why would you post the question here.
JDeveloper has native support for JAX-RPC based Web services development in 10.1.3 and JAX-WS support in 11 - check out the online demos linked from the home page to see these in action. -
[JS][CS5] How can use 'edit with' option for link using sripting
Hi All,
I Can edit link using Link.editOriginal () if the default application is as i need it will open it from there, when I try to open it with other application instead of default application of link file I can't (usually we "use edit" with option in manually). Is there any option to do it in scripting.
Any clue will help us to update the large set of links in a single click.
Thanks in advance,
Sankar LHi csm_phil,
You are exactly catch my point, my requirement is to update math type eps file. If my math type equation default application file is illustrator (say) as below
it will open in illustrator instead of mathtype if i use editOriginal function...
Jus i need to open it in mathtype, the link file default application file is whatever it is.
Thanks,
Sankar L -
I have around 990 databases on a single SQL server in which I want to rename two tables 'AuditEvent' and 'AuditPropertyEvent' to 'AuditEvent_Archive' and AuditPropertyEvent_Archive table.
Then I want to transfer lastest 6 months of data from now newly rename archived tables to New created Auditevent tables (Which will have same structure as old),
For doing it I tried Cursor and SP_msforeachdb as possible solutions but its not allowing me to execute 2 sp_rename statements with go inside a dynamic statement.
Please suggest any possible solutions on how to rename the 2 tables in all databases using sp_msforeachdb or cursor in a single go.exec sp_msforeachdb '
USE [?]
IF EXISTS (SELECT 1 FROM ?.INFORMATION_SCHEMA.TABLES WHER TABLE_NAME = ''AuditEvent'')
EXEC sp_rename ''AuditEvent'',''AuditEvent_Archive''
IF EXISTS (SELECT 1 FROM ?.INFORMATION_SCHEMA.TABLES WHER TABLE_NAME = ''AuditPropertyEvent'')
EXEC sp_rename ''AuditPropertyEvent'',''AuditPropertyEvent_Archive''
SELECT *
INTO AuditEvent
FROM AuditEvent_Archive
WHERE datecolumn>dateadd(month,-6,getdate())
SELECT *
INTO AuditPropertyEvent
FROM AuditPropertyEvent_Archive
WHERE datecolumn >dateadd(month,-6,getdate())
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?
You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express. -
How to delete double contact using icloud with pc for iphone4
hoe to delete double contact using icloud with pc for iphone4
Delete Contacts from iPhone the Fast Way, All or Individually
-
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
How to use Add Query Criteria for the MySQL data Base in Netbeans ?
How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM -
How to Use the language function for assignment and validation
Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
ArnabHi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz -
How to use the index method for pathpoints object in illustrator through javascripts
hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..Hi, what are you trying to do with path points?
CarlosCanto -
How to use the different class for each screen as well as function.
Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
'Class objects
'UI and Di objects
Dim objForm As SAPbouiCOM.Form
'Variables
Dim strQuery As String
#End Region
#Region "Methods"
Private Function GeRate() As Double
Return Double
End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
If pVal.BeforeAction = True Then
If pVal.MenuUID = "ENV_Menu_MIB" Then
End If
Else ' Before Action False
End If
End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM -
How to use Terminal with KeySpan USB serial adaptor cable?
I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason SjobeckHi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
How to Use Gmail With Apple's Mail?
Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tmlI notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky? -
How to use AppleScript to set "character fill color" in Pages 5.2?
For Pages 5.2 on OSX 10.9.3, what is the correct applescript for changing the "character fill" of text in pages.
If you highlight text, you do this via your mouse in the inspector by clicking "style," "advanced option (the gear wheel to the right of bold, italics, and underline), "character fill color (clicking on the multi-color circle, not the dropdown menu), and then choosing a color that comes up in the "colors" dialogue box.
I've looked all over and cannot find how to use applescript to set the character fill color in pages.
In some examples (not directly related) I see "character fill" used.
In others, I see "colorfill."
Basically, I want to use applescript, embedded in a keyboard maestro macro, to change the background color of the text (not the text color itself) to particular colors.
Given the changes and updates to Pages this year, and to applescript, what's the easy way to do this?
Thanks!
ChuckPages v5.2 still does not include selection-object, or character background color entries in its AppleScript dictionary, as does Pages ’09. Indirectly, using System Events, you can get the text selection in Pages v5.2, but then you can do nothing to change the selection. No assurances as to if or when Apple will mature the AppleScript dictionary support for Pages v5 series.
Maybe you are looking for
-
I am trying to download from my camera. Iphoto will not download any photos because it says one photo is not transferrable. How do I get the other ones.
-
IPhoto 8.1.2 won't quit
iPhoto 8.1.2 on an i5 iMac won't quit after I added 2 photos and printed them. Yes I have 10K photos in the library but surely the i5's four processors allow things to regroup efficiently. The Activity Monitor is busy of course (17 threads) so I'm go
-
Missing Master Site in Multi Master Environment
Hello, we are using MM-Replication on three Master sites with two replication groups. Replication support was installed and configured by the application vendor. I do not have experience with Multi Master Replication. The data of the RG (Readonlymast
-
How to find out the objects are behind(not hidden) an image?
Could you please advise me is it possible to find out if the texts (or) objects are behind (not hidden) an image (or) any tinted boxes using scripting via "illustrator cs3". Thanks for looking into this.
-
I need to configuration a BT HUB3 so i can upload when using remote access on my Seagate Network Go Flex Home