How to use apps manager?

I recently upgraded my E71-2 from an 8gb class 6 card to a 16gb class 10 card so that I could load all of the Nokia maps. I finally got the card installed and maps loaded.  It was an incredibly frustrating job, but worth it as the phone seems much faster with room for more apps. 
My issue now is that I successfully (?) loaded several apps that show in the apps manager, but there is no start icon.  For example, the Nokia multiscanner shows as installed (was installed prior to the card upgrade) but I can not get it to run; also just loaded several translation dictionaries from the Nokia site with similar results.  What am I missing?
Regards, Bill
Solved!
Go to Solution.

Problem solved without any hard or soft resets.  It seems that the apps manager reports what was/is installed with no regard to its operational status.  Evidently, when I installed the new memory card, some app links were ‘lost’ as were their icons.  However, when the missing apps (multiscanner and Sports Tracker) were re-installed, all was OK except for the Nokia Dictionary which only wanted to remove the new languages that were shown as loaded in the apps manager.  It turns out that the Nokia dictionary will only allow a max of three languages!!!!  After I removed some to get to this limit, all was now OK.
After many hours, I also have all of the world maps loaded and working well.  This as well as the memory card upgrade has been an incredibly painful operation actually worse than working with MS DOS!  Ovi Suites is much worse than PC Suites – both of which are totally out of date and very slow with a tendency to lock up the PC.  I found that it was much easier to start PC Suite first to recognize the phone and then open OVI Suites to work with the maps.
Bottom line – I still love the E71 phone with its superb hardware and its many features.  If only the SW could be improved to that of its HW.  I also love it because I can navigate and also call with Gizmo all without a data plan.
Happy New Year, Bill

Similar Messages

  • How to use file manager to copy music to ipod?

    How to use file manager to copy music to ipod so can bypass iTunes?

    You can't.
    There are 3rd party apps that will load music onto your iPod.

  • How to use application managed entity manager in EJB?

    I finish reading The EntityManager Interface in JEE tutorial.
    I know I can use container manager entity manager in EJB, but I want to explore how to use application managed entity manager in EJB.
    Can I use application managed entity manager in EJB (container management JTA transaction is used)? Where do I should close entity manager if can?
    The following is an example from JEE tutorial, but didn't find where to calose entity manager. and can I create mutiple EntityManagerFactory objects and Entity Manager objects to use them in a JTA transaction?
    @PersistenceUnit
    EntityManagerFactory emf;
    EntityManager em;
    @Resource
    UserTransaction utx;
    em = emf.createEntityManager();
    try {
      utx.begin();
      em.persist(SomeEntity);
      em.merge(AnotherEntity);
      em.remove(ThirdEntity);
      utx.commit();
    } catch (Exception e) {
      utx.rollback();

    Seems like a very poor example, the whole power of EJBs is to use Container Managed Transactions so you don't NEED to manage the transaction and the entity manager yourself. What you posted is code I would expect in a non-JEE application, or in a piece of code which requires fine-tuned transaction boundaries such as batched data importing logic.
    If I were you I'd research JPA in steps.
    a) learn about JPA as an API outside of the scope of EJBs (recommended reading: the book 'Pro JPA 2')
    b) learn about Container Managed Transactions in EJBs
    c) learn about Bean Managed Transactions in EJBs
    Right now you're rushing into c). I can understand that it raises many question marks at this point.

  • How to use Cache Management Library (CML) for custom applications?

    Hello,
    We are planning the migration of multiple applications (J2EE, Portal, Web-Dynpro for Java) from 7.01 to 7.3 and we would like to replace some custom cache implementations with a central cache management provided by the SAP Web-AS Java.
    Several SAP standard services (e.g. UME, Configuration Manager, Scheduler) seems to use the "Cache Management Library" (CML):
    [http://help.sap.com/saphelp_nw73/helpdata/en/4a/f833eb306628d2e10000000a42189b/frameset.htm]
    Such caches can be monitored using SAP Management Console (AS Java Caches).
    Portal Runtime (cache_type=CML) and Web Page Composer can also be configured to use CML:
    [http://help.sap.com/saphelp_nw73/helpdata/en/49/d822a779cf0e80e10000000a42189b/frameset.htm]
    [http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/13/76db395a3140fcb17b8d24f5966766/frameset.htm]
    So our questions:
    How to use CML for custom applications?
    Is there any example or documentation available?
    Kind Regards,
    Dirk

    Thanks Vidyut! You've answered my question.
    I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
    Currently, my web.xml is as follows and it doesn't work.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <taglib>
    <taglib-uri>http://abc.com</taglib-uri>
    <taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
    </taglib>
    </web-app>
    Thanks again!
    Joe

  • How to use varaibke manager option at RPD in obiee 10g

    Hi
    At RPD level , can anyone please help on uderstanding how to use the variable manager.
    thank you

    Hi,
    System session variables:
    System session variables have reserved names, that cannot be used for other kinds of variables (such as static or dynamic repository variables and non-system session variables).
    e.x:
    1)
    if u want to get and display user login ID,group,timezone...Date and time...etc... can be done by using session variable
    2) Exteranl application integration ( java -jsp) by using go url.
    here u can specify the session variable and it will passed into Java apps.
    3) setting log level by using session varaible
    4) u can use it report tittle/header..etc
    for more:
    http://obiee101.blogspot.com/2008/02/obiee-adding-session-variables-to.html
    http://obiee-blog.info/administration-tool/how-to-set-session-variables-using-url-variables/
    http://sureshotstrategies.blogspot.com/2008/07/about-session-variables-in-obiee.html
    http://inetskills.com/obiee/obiee_11.php
    Thanks
    Deva
    Edited by: Devarasu on Dec 6, 2011 5:10 PM

  • How to use viewslifetime managed property to get the list of sites which are least accessed?

    Hi,<o:p></o:p>
    I am trying to get the subsites of a site collection which are least accessed. I am using ViewsLifeTime managed property in a content search web part with a condition like this:
    ViewsLifeTime < 0
    OR
    ViewsLifeTime = 0.
    However, It is not giving any results. I even tried with ViewsLifeTime < 10. I have some subsites which are accessed less than 10 times. I came to know this when I saw the value of ViewsLifeTime
    property.
    Can anyone suggest how to add a condition on ViewsLifeTime property?
    Thanks in advance.

    Hi Mohan,
    Here is a thread with similar issue for your reference:
    http://social.technet.microsoft.com/Forums/en-US/770f100d-eadb-45d1-9305-15f11cf9038d/ctxcurrentitemviewslifetime-is-showing-null?forum=sharepointsearch 
    If you would like to get site usage report in SharePoint 2013, there is OOTB feature for you to view popular trends report for a site, you could refer to the link below:
    http://blogs.technet.com/b/tothesharepoint/archive/2014/01/28/view-and-configure-usage-analytics-reports-in-sharepoint-server-2013.aspx
    In addition, custom script for usage report for SharePoint sites might be more helpful to your requirement to know access times:
    http://blog.falchionconsulting.com/index.php/tag/audit/
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to use Template manager in Adobe Designer

    Hi,
    I am new to WebDynpro. I am trying to import templates in Webdynpro Adobe Designer.
    In the Interactive Form Designer, there is a Menu called "Tools", which has option "Template Manager".
    When I select a template there is only a buttion Set Selected as default after i click it but nothing happen!! Can anyone please let me know how to use the Template Manager?
    Thanks.
    Edited by: bo wang on Jan 15, 2008 9:34 AM

    Yes, here you dont have option of using standard template. In this case, just right click on the Project name shown in WD perspective on the left hand side of screen and check the Projectlocation in Properties --> Info.
    go to "Projectlocation"\src\configuration\Components. Here you can find the XDP file. Open this XDP file, in this XDP you have File option. Select the template, and save the file.
    This change will appear in WD.
    With regards,
    Amit

  • How to use the Managed Review and Approval

    Hi,
    I'm a RIA Consultant at iDA MediaFoundry, Adobe Gold Partner in Belgium. I'm trying to figure out how the new solution accelerators work and how we can use them in the solutions that we develop for clients.
    I'm a bit stuck though with the Managed Review and Approval solution accelerator. I cannot figure out how the application actually works, how it communicates with livecycle and how we can use this application in our projects for clients.
    Does anyone have a tutorial or a document on how to use this solution accelerator? I know this is a rather big question, and the answer will be even bigger, but I really could use some help from anyone who knows how to use all this.
    Thanks in advance for your answer.
    Kind regards,
    Ronald Kamp

    I would also suggest that you look at the resources on devnet.
    http://www.adobe.com/devnet/livecycle/testdrive.html (see the Managed Review & Approval)
    as well as the downloads and full documentation http://www.adobe.com/devnet/livecycle/solutionaccelerators.html

  • How to use solution manager in upgrade projects

    Hi,
    How to utilize/use the solution manager in upgrade project like R/3,BW,CRM or entire landscape.
    if we are upgrading the r/3 4.6c to ecc6 and bw3.5 to bi7.0 how to use the solution manager
    please help and thanks in advance.
    Edited by: MAHIPAL REDDY on Jan 1, 2009 1:28 PM

    Hi,
    Check [this document|https://websmp208.sap-ag.de/~sapdownload/011000358700002696532005E/310_320_SOLMAN_URMP_EN.doc]. This will help you to proceed further.
    This is a detailed documentation on using Solution Manager for your upgrade project.
    This will solve your problem.
    [This Pdf |https://websmp208.sap-ag.de/~sapdownload/011000358700000208052007E/Upgrade_FAQ_SolMan_70.pdf]of FAQs on upgrade project is rich in information.
    Feel free to revert back.
    --Ragu
    Edited by: Raguraman C on Jan 3, 2009 5:27 PM

  • How to use app to find ipod.  Where do I go on computer to find my ipod?

    I've downloaded the "find my ipod" app but, I'm not sure how to use it to locate my ipod.  Can someone please help me with this:(

    The find my ipod app does not make it so you can find your ipod.  it makes it soi you can find your other idevices from your ipod.
    You would have had to set up the find my ipod feature on the ipod itself before it was lost AND the ipod has to on AND it has to be connected to wi-fi.  Then you can go to icloud to locate your ipod.

  • How to Use Solution Manager to collect Status Reports from Consultants

    Hi,
          I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
    BR,
    Raj

    Hi Rajasan,
    to be able to meet this requirement, you need to set up plan working load in admin tab for your resource,  they need to update actual data based on the work completion, you will get status of work,
    if you require email, you need to set-up scot, then develop a program with execution scheduling
    please check and revert
    Anil

  • Critical patch using Apps Manager

    Hello Gurus.
    I would like to know if OAM (Oracle Apps Manager) will give them notifications for critical patch updates. Would the AS Config or Provisioning pack assist with this?
    Please let me know the solution ASAP.
    Regards
    Venu

    HI Nisit,
    This you can get in Maintenance Optimizer. While downloading any patches, you can generate a side effect report which will be mailed to your id and there you can get your required details.
    You need to configure maintenance optimizer for this.
    Rajeev

  • How to use Update Manager

    I am new to VMWare. I have 2 ESXi 5.5 hosts with 2 virtual machines(WS 2008R2) on one and 1 virtual machine(WS2008R2) on the other. I have VMWare VCenter Server installed on one of the windows vms that has the 2 vms. Update Manager is installed on that windows vm also. I do not have centralized storage. These windows vms are  production servers. I have never updated these host. They have over 200 updates.
    Question: How do I go about updating these host? I know the windows server vms have to be shut down. If I shut down the vm with Update Manager on it, how will it update the host its on? Should I allow every update to update? If not, how do you chose which updates to update. Is there a way to move these vms around when you don't have centralize storage?
    I have had these questions out there for 2 days and no one seems to be able to answer them.
    Can someone answer this one question: Is it possible to update the ESXi host that vCenter server is install on, with some sort of schedule that will shut down the vms(even the one that vCenter is install on) and put it in to maintenance mode and run the updates on the ESXi host.
    Ok, here is how I did it:
    I cloned the vm with vCenter Server on it. I put the clone on the other host.
    I changed the ip address of the original server before I shut it down. I deleted the dns entry on my dns server that pointed to it and flush the cache.
    I booted the clone and change the ip address and rebooted.(It will not let you use the ip address of the original server, it still sees the ip address of that server on the network).
    Make sure you give the vCenter Server services enough time to come up before you log on.
    You will loose connectivity to the Update Manager Plugin because of the ip address change. Follow these kb articles to fix that-kb 1013222,kb 1014639,2007398. Did not have any trouble with the fixes.
    Once you get Update Manager running you can scan and do the update for the host.
    You have to do your normal shut down the vms and put in maintenance mode to update.
    After that shut down the clone and delete it.
    Bring up the original vCenter Server and change the ip and reboot.
    I answered this in case someone else runs across this problem.

    Hi, I'm not familiar with that Mac feature since I don't use a Mac. However, you can go to this site and Install:
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
    Also you can now use the automatic Flash Player notification for the Mac here:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
    With this, the next time Flash Player has an update you will receive a prompt and can choose to "Install now"/"Remind me later" or "Don't Install"  I use it all of the time and the update is done in under 2 minutes!!
    Hope that helps,
    eidnolb

  • How to use a managed bean in a bounded task flow without definig it in adfc-config

    Dear all
    I create a bounded task flow without page fragments (the pages are jspx), i created a jspx page with a button that its action has bounded to a managed bean function.
    i defined the managed bean on the corresponding bounded task flow, but it does not work.
    But there is no problem when i define the managed bean in adfc-config.xml.
    can anybody help me with this problem.
    is it possible to use jspx page with backing bean in bounded task flows, without defining the beans on adfc-config?
    Thank you very much

    Dear Timo
    I use jDev 11.1.1.6 and the scope is Request.Although when i use task flow page fragment and create jsff pages, there is no problem.

  • How to use Desktop Manager to synchronize several address books?

    Customer found on BlackBerry device - address book options - there's 2 Desktop under Address Books. How to specify which address book will be synchronized with outlook via desktop manager as  a wired sync?

    Your having this issue, because at first, your blackberry was trying to sync via the BES, then you hooked it up to the desktop manager. The desktop managed then tried to sync the device over the wire via the desktop manager and turned of wireless sync, how do you wanna sync, wirelessly, or through the BES?
    If you wanna do it through the BES, you have to delete desktop cmime, desktop sync and desktop cical and resent those from the server to get wireless sync back.
    to get to servic book, go to settings/options/advanced options/service book and scroll to these service books and delete them, then from the bes manager, repush service books will resent them, this  can take up to 15 minutes though.
    If you wanna sync via the wire, just sync with the desktop manager, you should not be trying to do both
    If someone helped you give them kudos. Research all info!

Maybe you are looking for