How to use ARD to access a PC running Windows 7?

Hi,
I just want to VNC my PC in the office. How do I access Windows 7 from my Mac using ARD 3.6.1?
My PC has RealVNC server running but they dont' seem to talk well with my Mac's ARD.

Hi
Try using this instead:
http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-9 9BB-B664B27EE1F0#viewer
Less hassle and far quicker.
HTH?
Tony

Similar Messages

How to use JAPI to Access Essbase 6.5

Do anyone knows How to use JAPI to Access Essbase 6.5?
I was told to install Enterprise Services 7.3.1.10.
But when I test eds samples, I can connect Essbase but can not get data from Essbase.
Need to change another Enterprise Services(I was told 7.3.1.10 is the latest version), or do some config in 7.3.1.10.
Thanks a lot in advance

Gee is correct. You will need to use EAS 7.x to add an analytic server. You will also have to do a few other tasks such as synch'ing security, etc.
Further, as you are not accessing the exact same version of Essbase as your version of EDS, there is a property setting you will have to change to be successful. In eds\7.1.3\bin, open essbase.properties and modify the server.olap.direct setting to set it to false. What this setting does is forces EDS to use it's own private set of C API files and to use them for all calls to Essbase. Otherwise, EDS will attempt to use pure Java calls to the server. Unfortunately, the pure Java calls were implemented in an 'evolutionary' manner so every Essbase version got more calls until sometime in the System 9 timeframe. By the time 9.3 shipped (and maybe before, I would have to check), all calls the server are pure Java and that property setting is no longer available.
Tim Tow
Oracle ACE
Applied OLAP, Inc

How to Use a System Repair Disc to Restore Windows 7

Hi ! Please start here!
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
http://forums.toshiba.com/t5/Windows-8-Knowledge-Base/What-can-I-do-if-my-Windows-8-laptop-won-t-sta...
http://pcsupport.about.com/od/toolsofthetrade/ss/windows-7-startup-repair_2.htm
PS Please read all these links and then post back here with your complete model number found on the bottom of your laptop and complete information to what you have tried to get your PC working I would love to spoon feed everyone. It's just not possible.
Dokie!!
PS2 Now read this and see if any thing here helps.
http://forums.toshiba.com/t5/Computer-Troubleshooting/FYI-Recovery-to-Factory-Settings-Toshiba/td-p/...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏238 KB

Hi! I found this on the form!
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Use a System Repair Disc to Restore Windows 7 For Seniors For Dummies

Hi I'm new to this forum and I haven't seen the proper place to post some thing like this. I'm going to post it here and staff can do what they wish with it.
I can't understand why people aren't creating a System Repair Disc to Restore Windows 7. This is the best tool you can have. I have seen a ton of people posting here that can't boot into Windows 7. No mention of a repair Disc. Can you people not read?? This should be one of the first things to do after creating System Recovery Media(Mine requires 5DVD's). What is your thinking not to do these things?
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://windows.microsoft.com/en-US/windows7/Create-a-system-repair-disc
PS I don't have any trouble. I just want people to please do these things and save your self a lot of grief, and make a back up image of your OS on a external drive
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Hi! I found this on the form!
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

How Can I Print from my Microsoft Surface Running Windows 8 RT?

How Can I Print from my Microsoft Surface Running Windows 8 RT?
Most new wireless printers won’t have a problem printing from the Microsoft Surface with Windows 8 RT. All you should have to do for these printers is tell them to print and they will. Older wireless, Ethernet, and USB printers might not have an officially supported driver in Windows 8 RT, but there is a way to get the printers working. There are different requirements depending on how the printer is being connected to the Surface.
Note: All steps below are only for PhotoSmart, OfficeJet, DeskJet, and other HP Inkjet printers. These steps are not for Laserjet printers or printers from other manufacturers. These steps may not work for all Inkjet printers. If these steps don’t work, try different drivers from the list until you find one that will work (you’ll understand what I mean once you follow the steps below). If none of the drivers work, your printer will not work with the Surface.
For networked printers (wireless or Ethernet), all you need is either the Surface keyboard, or an external USB keyboard to connect to the Surface. This just makes anything you have to type easier to type. You will also need to have the Surface and the printer connected to the same network.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Below the Search Box, touch Settings.
In the search Box, type Devices and Printers.
Touch Devices and Printers.
Touch Add a Printer.
Touch “My printer is not listed”.
Select the TCP/IP option and touch Next.
Enter the printer’s IP address and touch Next. Note: You can get this from the printer’s Network Configuration Page, or from your router’s DHCP list.
The Surface will locate the printer and try to install it. The install will fail and the Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
For USB connected printers, you will need a USB cord to attach the printer to the computer.
Connect the printer to the computer via USB.
Windows will try to find the drivers but will not be able to.
Here Windows may ask you if you want to choose the driver to install. If it does skip to step 14 below.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Under the Search box, touch Settings.
In the Search box, type Device Manager.
Touch Device Manager.
Touch View and select Show Hidden.
Search for the printer in the Device Manager. It should be under Other Devices with a yellow caution sign beside it.
Select the printer from the list.
Touch Action.
Touch Update Driver, or Install whichever one it displays.
The Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Use parallels or boot amp to run Windows XP?

Should I use boot amp or parallels to run Windows XP??

What computer do you have? What OS? If you have a newer computer or Lion OS you can't use XP in a Boot Camp partition.
No they don't adversely affect "theMac".

I updated to ios 7 2 days ago and I synced with my computer for the first time yesterday. Most of my calendar appts and events were wiped off my phone but are still on the computer. I use outlook 2010 and a pc running windows 7.

I updated my iphone 5 to ios 7 two days ago and I synced with my computer for the first time yesterday. Most of my calendar appointments and events were wiped off my phone but are still on the computer. I use outlook 2010 and a pc running windows 7. Rebooting the phone and the computer failed to remedy the calendar sync problem.

Easy solution for restoring lost calendar informaiton, thank goodness. On your iPhone, go to settings, then to iCloud. If your Calendar selection is turned off, turn it on. Your info should restore. If your Calendar selection is turned on, then turn it off. Choose to save calendars when asked. After it shuts the Calendar off, turn it back on. Your info should be restored.
Thank you to Apple support for walking me through this. Shame on you Apple for not just telling people about this easy fix rather than making us go through all of this pain and worry.
- JT

How to Use synchronous RFC calls during test run for remote accesses

there is a Setting for the usage of RFC accesses from a tested system
using eCATT.
'X' - Use asynchronous RFC calls during test run for remote accesses
' ' - Use synchronous RFC calls during test run for remote accesses
I developed an eCATT as following :
SAPGUI ( SAPGUI_1 , Target_system_1 ).
SAPGUI ( SAPGUI_2 , Target_system_2 ).
My question is how to run the eCATT in a synchronous RFC calls
PS: I do not want to change the Target_system to the same one in the
above script of ecatt.Because I need to run it in 2 different Target
systems sometime.
for example, I give a Target_system_3 when run this eCATT
I want the SAPGUI_1 and SAPGUI_2 run the Target_system_3 but not the
Target_system_1 or Target_system_2 .
Could you please tell me how to make it without the changes in script?
Edited by: Weitong Liu on Mar 24, 2011 9:44 AM

Hi Liu,
Weitong Liu wrote:
> ' ' - Use synchronous RFC calls during test run for remote accesses
This is the standard option value. Asynchronous are not the standard way and used only for very special purposes.
Weitong Liu wrote:
> I developed an eCATT as following :
> SAPGUI ( SAPGUI_1 , Target_system_1 ).
> SAPGUI ( SAPGUI_2 , Target_system_2 ).
> My question is how to run the eCATT in a synchronous RFC calls
The commands will be executed in sequence. So each call will be synchronously replayed against TS1 and TS2.
What is you issue with this standard procedure?
Kind regards,
Christoph

How to use Javamail for accessing additional mailboxes -IMAP, Exchange 2010

hi,
I want to access a shared mailbox (NOT FOLDER) via Javamail API (1.4.5) using IMAP(s) with plain logon. The mailserver is a Exchange Server 2010.
User: user1 ([email protected])
pwd: xxxx
shared mailbox: [email protected]
Properties:
mail.imaps.socketFactory.port = 993
mail.imaps.starttls.enable = true
mail.imaps.socketFactory.class = javax.net.ssl.SSLSocketFactory
mail.imaps.socketFactory.fallback = false
username = [email protected]
password = xxxx
I´ve managed to get access to the user1 - mailbox:
Session session = Session.getInstance(properties, new ExchangeAuthenticator(username, password));
session.setDebug(true);
Store store = session.getStore("imaps");
store.connect(imapHost, username, password);
--> this works just fine! But now i want to access the additional mailbox by changing the login-String:
[email protected]/shared_MB (user@domain/additional_MB)
--> unfortunately I´m getting an "NO AUTHENTICATE" message:
DEBUG: setDebug: JavaMail version 1.4.5
DEBUG: getProvider() returning javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
DEBUG: mail.imap.statuscachetimeout: 1000
DEBUG: mail.imap.appendbuffersize: -1
DEBUG: mail.imap.minidletime: 10
DEBUG: trying to connect to host "host.domain.com", port 993, isSSL true
* OK The Microsoft Exchange IMAP4 service is ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
A0 OK CAPABILITY completed.
DEBUG IMAP: AUTH: NTLM
DEBUG IMAP: AUTH: GSSAPI
DEBUG IMAP: AUTH: PLAIN
DEBUG: protocolConnect login, host=host.domain.com, [email protected]/shared_MB, password=<non-null>
DEBUG IMAP: AUTHENTICATE PLAIN command trace suppressed
DEBUG IMAP: AUTHENTICATE PLAIN command result: A1 NO AUTHENTICATE failed.
javax.mail.AuthenticationFailedException: AUTHENTICATE failed.
I was able to get access with Thunderbird and also with the Exchange OWA-Client, so I think there is something missing in my code...
or is it just impossible to get access to a different mailbox using javamail and plain-auth?
Thank you in advance.

Thanks bshannon, that was a great idea!
I haven´t found an solution yet, but I have maybe identified the real problem:
Here is some interessting Thunderbird - Logging stuff:
744[7161040]: try to log in
744[7161040]: IMAP auth: server caps 0x1187235, pref 0x1006, failed 0x0, avail caps 0x1004
744[7161040]: (GSSAPI = 0x1000000, CRAM = 0x20000, NTLM = 0x100000, MSN = 0x200000, PLAIN = 0x1000, LOGIN = 0x2, old-style IMAP login = 0x4)auth external IMAP login = 0x20000000
744[7161040]: trying auth method 0x1000
744[7161040]: got new password
744[7161040]: IMAP: trying auth method 0x1000
744[7161040]: PLAIN auth
744[7161040]: 7082000:xmail.domain.com:NA:SendData: 2 authenticate plain
744[7161040]: ReadNextLine [stream=7ec9e88 nb=3 needmore=0]
744[7161040]: 7082000:xmail.domain.com:NA:CreateNewLineFromSocket: +
744[7161040]: 7082000:xmail.domain.com:NA:SendData: Logging suppressed for this command (it probably contained authentication information)
744[7161040]: ReadNextLine [stream=7ec9e88 nb=27 needmore=0]
744[7161040]: 7082000:xmail.domain.com:NA:CreateNewLineFromSocket: 2 NO AUTHENTICATE failed.
744[7161040]: authlogin failed
744[7161040]: marking auth method 0x1000 failed
---> okay, so PLAIN AUTH is failing.....
744[7161040]: IMAP auth: server caps 0x1187235, pref 0x1006, failed 0x1000, avail caps 0x4
744[7161040]: (GSSAPI = 0x1000000, CRAM = 0x20000, NTLM = 0x100000, MSN = 0x200000, PLAIN = 0x1000, LOGIN = 0x2, old-style IMAP login = 0x4)auth external IMAP login = 0x20000000
744[7161040]: trying auth method 0x4
744[7161040]: got new password
744[7161040]: IMAP: trying auth method 0x4
744[7161040]: old-style auth
744[7161040]: 7082000:xmail.xmail.domain.com:NA:SendData: Logging suppressed for this command (it probably contained authentication information)
744[7161040]: ReadNextLine [stream=7ec9e88 nb=23 needmore=0]
744[7161040]: 7082000:xmail.domain.com:NA:CreateNewLineFromSocket: 4 OK LOGIN completed.
744[7161040]: login succeeded
--> okay, so Thunderbird is using "old-style IMAP login" and is successful.
Unfortunately I have no idea what that actually means or how to use it in Javamail (is it even supported?). Any suggestions?

How to use jacob to access a com object with coldfusion7

i want to use jacob to access a com objcet with coldfsuion7(i
just want to do a test)
how to do?
Thank a lot!

Flashcqxg wrote:
> i want to use jacob to access a com objcet with
coldfsuion7(i just want to do a test)
> how to do?
you don't. use createObject():
mailer=createObject("COM","CDONTS.NewMail");
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=cfobject_08.html

How to use rescuecd to access NAS200 RAID drives

I have been lurking trying to figure out how to access my NAS200 drives after a power supply failure and of course I have no backups, relying on the RAID to create my two copies. (Lesson learned)
I have a NAS200, with two Western Digital 1TB Green hard drives. They are configured in a RAID 1 mirror and they are in a journaled file system
So from what I've been reading, I believe they are in XFS. and I can use the rescuecd iso to access the drive directly to copy them off onto another drive.
I am using Windows XP SP3. The computer system is 8 years old - a Dell Pentium 4 Dimension system with 4GB of memory. I do have Ubuntu, but I have no idea how to use Linux, and definitely not the command line that the rescuesystemcd drops me into.
I've taken one of the drives and installed it in an external USB drive and plugged it in the system.
In Windows XP SP3, I can see the drive on my virtual file manager and I can see the three partitions, one main data partition, the configuration partition and the swap partition, but of course it's not the right file system. and it's not ext2/ext3 so Ext2IFS will not work for me from what I've read.
In ubuntu 11.10, when I've plugged in the external drive, I have no idea how to access the drive. I suspect I have to mount it, but I have no idea how to do it or even where to begin looking for it to access it.
And of course in the CLI using the systemrescuecd, I am completely lost there: The last CLI I used was MS-DOS from over 15-18 years ago. I can ls (MS-DOS dir) and cd to navigate the folders of the file system and I believe cp is copy? and if I was using the Ubuntu CLI, I have to sudo everything I believe.
So after this long post, what am I asking for?
- How do I mount the external drive in either Ubuntu or the system rescue CD iso.
- Can I mount a second external drive with a NTFS file system in Ubuntu or the system rescue CD?
- I would prefer to do it in Ubuntu or some other graphical method so that I could just drag and drop from one disk onto another or failing that using the commandline, what command would copy the entire drive's file system from one to another?
Thanx

Are you able to access the web interface of NAS200 using its IP address? If, 'yes' then unplug both the hard drives? Reset NAS200, reconfigure it and connect the drives again. See if that helps.

How to use linphone - open sip VoIP library in Windows desktop application.?

I want to develop an VoIP .net application in C# lang for windows desktop. Does anyone know any open sip VoIP library to use.? I know about Linphone. but it is available for Android, iOS and Windows(app developed using GTK- UI builder). If anyone knows how
to use Linphone for windows then ans also will be appreciated.
I am using MS visual studio for application development. Tell me its compiling steps as well. How to use that in WPF or WinForms.?
Thanks in advance.

Hello,
The VoIP seems not MS product and can you clarify it? Basically, if it is third party product, you will need to ask for the API writer for details. For example, find a forum here:
http://www.linphone.org/
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get WDDM on an old Desktop running Windows 7?

My PC has a VisionTek Radeon 9200 SE Family card. It supports DirectX 9, but I do not know how to get/see if I have WDDM. According to my PC, it has XDDM. Is there a way to update this or install this without having to buy anything? I don't have the budget
to buy a new card or anything.
It runs Windows 7 Home Premium, but used to run Windows XP.
2.6 Gigahertz Processor
1 GB of Ram
30 GB on my hard drive as a main partition, 90 GB total
Thanks!

Type DxDiag in the start menu's search box )
After the DxDiag opens up select the Display tab then check the
Driver Model.
You may also visit graphic card manufacturer website to find out if your card is compatible with WDDM drivers.
You may go through the following blog article:
http://chall32.blogspot.in/2009/12/windows-7-aero-glass-without-wddm.html
S.Sengupta, Windows Entertainment and Connected Home MVP

Want to use touch screen in photoshop. Heard this is supported for new surface 3, is there any way to use it on any touchscreen laptop running windows 8.1?

Hi, I have the lenvo yoga 2 touch. I run windows 8.1, want to use touh facilities in photoshop. Can I do this yet? Heard surface 3 can due to special deal with adobe, will this be availble to all cc users or will there be extra charge etc. Any info appreciated. Sorry for bad english, late nights with little one!

Touch is available for all Windows 8 devices that support direct (on-screen) touch. Note: touch is only enabled of you are using open-gl, so the restriction is that your computer must be able to support open-gl/hardware accelerated drawing. You can download the trial version of Photoshop and try it out.

How to use ARD to access a PC running Windows 7?

Similar Messages

Maybe you are looking for