How To use Arial (Cyrillic) font in Reports 10g for PDF output

Hi,
My reports are in Arial (Cyrillic) font, but there are only hieroglyphes in pdf output. Is there a problem with fonts on Report Server or something else?
My Report Server is 10g R2 (10.1.2.2) and OS is RHEL 4.
I followed metalink notes 750805.1 and 356221.1 but it didn't help me.

You also have to be careful with fonts. The font you download may be the same name, but a different font. Just because you find a Zurich BT font, does not mean it is the same. If you search on the internet, there are several sources of some Zurich BT fonts free. However, they may or may not be the same font. Editing is best done on the original document and not the PDF. One of the PDFs I found on the Landis site was only in Zurich font. I would think that the original file is available from the company and that should be the document you edit, not the PDF. It appears the original was created in InDesign (CS3).

Similar Messages

How to use the 3of9 font in report in concurrent program

Dear All,
I have developed a report in 6i, and selected the font 3of9.ttf in Report Builder, which is a Barcode type font. but when i register the report as concurrent program and run the report concurrent program it is not showing me the field value in barcode format.
Then i tried to ftp the font to unix server at location "$OA_JRE_TOP/jre/lib/fonts/3of9000.ttf" also created the xdo.cfg file at "$OA_JRE_TOP/lib" folder.
But still i am not getting the expected result.
Can anyone help me out to resolve this issue?
Thanks & Regards,
CAK

You can't just copy a Windows font to Unix. You need specific Unix installation steps. That I know, for the rest I am unfamiliar with Unix fonts.
Some info can be found here:
http://www.idautomation.com/kb/unix-finst.html
For specific problems with E-Business Suite, ask that in the EBS forum.

How to use intractive list in Alv REPORT

how to use intractive list in Alv REPORT with example.
thangs
venki.......

Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji

How to use a parameter of a report program in a dialog program

how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use a parameter in a report program in a dialog program

how to use a parameter in a report program in a dialog program

Hi Shaikh,
Post it in http://scn.sap.com/community/abap
"ABAP Development".
sree

How to use advanced tab in user reports?

Hi,
How to use "advanced" tab in user reports?
I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
Then I'm can "drill" from one report to another on right click, but how to pass parameters?
Is it even possible?
Regard
Libor

Thank you for reply.
I can't get it working.
I have two reports:
1. report:
Name: test
SQL: select 1 NUM, 'text' TEXT from dual;
On advanced tab:
ReportID: -null-
Name: test2
Report: Test2
2. report
Name: test2
SQL: select :NUM from dual;
Now, when I run the first report and click do right click on a row and select TEST2
from popup menu, it navigates to the second report test2, but WITHOUT actual value
from NUM column from first report.
I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
With this feature it would be even better.
Regards
Libor

Can anyone tell me how to use GUI status in ALV report.

Can anyone tell me how to use GUI status in ALV report. I want to use buttons in ALV report.

Juheb,
see the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Adding a button on the ALV grid using OOPs
check these sites.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
chk this.
alv-pfstatus:
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
then how to capture that button click.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
REPORT ZTESTALV.
TYPE-POOLS: SLIS.
*- Fieldcatalog
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
      IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV..
*- For Events
DATA:IT_EVENTS TYPE SLIS_T_EVENT.
DATA: X_FIELDCAT TYPE LVC_S_FCAT,
        X_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA:X_LAYOUT TYPE LVC_S_LAYO.
"{ FOR DISABLE
DATA: LS_EDIT TYPE LVC_S_STYL,
      LT_EDIT TYPE LVC_T_STYL.
"} FOR DISABLE
DATA: BEGIN OF IT_VBAP OCCURS 0,
      VBELN LIKE VBAP-VBELN,
      POSNR LIKE VBAP-POSNR,
      HANDLE_STYLE TYPE LVC_T_STYL, "FOR DISABLE
   <b>   BUTTON(10),</b>
     END OF IT_VBAP.
DATA: LS_OUTTAB LIKE LINE OF IT_VBAP.
SELECT VBELN
       POSNR
       UP TO 10 ROWS
      INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
      FROM VBAP.
DATA:L_POS TYPE I VALUE 1.
CLEAR: L_POS.
L_POS = L_POS + 1.
<b>X_FIELDCAT-SELTEXT = 'Button'.
x_fieldcat-fieldname = 'BUTTON'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-style = X_FIELDCAT-style bit-xor
                  cl_gui_alv_grid=>MC_STYLE_BUTTON bit-xor
                  cl_gui_alv_grid=>MC_STYLE_ENABLEd.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.</b>
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'VBELN'.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
x_fieldcat-ref_field = 'VBELN'.
x_fieldcat-ref_table = 'VBAK'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'POSNR'.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
"{FOR DISABLE HERE 6ROW IS DISABLED
SY-TABIX = 6.
LS_EDIT-FIELDNAME = 'VBELN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 10.
INSERT LS_EDIT INTO TABLE LT_EDIT.
*LS_EDIT-FIELDNAME = 'POSNR'.
*LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
*LS_EDIT-STYLE2 = SPACE.
*LS_EDIT-STYLE3 = SPACE.
*LS_EDIT-STYLE4 = SPACE.
*LS_EDIT-MAXLEN = 6.
*INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY IT_VBAP INDEX SY-TABIX FROM LS_OUTTAB TRANSPORTING
                                  HANDLE_STYLE .
X_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
"} UP TO HERE
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    IS_LAYOUT_LVC      = X_LAYOUT
    IT_FIELDCAT_LVC    = IT_FIELDCAT
TABLES
    T_OUTTAB           = IT_VBAP[]
EXCEPTIONS
    PROGRAM_ERROR      = 1
    OTHERS             = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Don't forget to reward if useful....

How to use views in sql script report?

All all
Can any one tell how to use views in sql script report?

Most of the views are based on tables (or other views which are based on tables).
The view typically shows one org at a time based on the context that is set.
If you need records for all orgs, you need to use the underlying tables. Oracle typically names the tables with a _all suffix.
e.g. PO_HEADERS will show records for one org at a time. PO_HEADERS_ALL will show records for all orgs.
Hope this answers your question,
Sandeep Gandhi

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How to install arial narrow font in cs2?

how to install arial narrow font in cs2?

Maybe these will help:
Arial Narrow unavailable, incomplete | CS applications | Windows
The Typekit Blog | Arial Narrow gets fixed

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

I got a software license crtificate ,how to use it??? i paied for it.

I got a software license crtificate ,how to use it??? i paied for it.

Which program, and where did you buy?
Do you have a redemption code?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

How To use Arial (Cyrillic) font in Reports 10g for PDF output

Similar Messages

Maybe you are looking for