How to use AttributeHierarchyOptimizedState property with Primary Key of the Dimension?

I'm reading the article about increasing SSAS performance. http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
I would like to increase processing performance of Customer Dimension with CustomerID as the primary key. It is a good practice to set AttributeHierarchyOptimizedState to NotOptimized to CustomerID attribute. What are the implications to the query
performance?
Please advise.

Hi,
Since the CustomerID is the primary key (surrogate key) and the usual practice is to hide the surrogate keys in client tools. It is the best practice to set the AttributeHierarchyOptimizedState to NotOptimized to CustomerID attribute. As specified
in the article SSAS will not create Bitmap indexes on top of that attribute and it saves a lot of processing time and decreases the cube size.
Regards,
Venkata Koppula

Similar Messages

Primary Key With Four Column ,How to use that Column As Primary Key In Form

Dear All,
i have create composite Key as primary Key With Four Column .
How can i use these column in Form With Report Page.
How can i use these four Column as primary Key to Edit Record .
How can i do this.
Thanks
Vedant

wrap a view around your table with this bogus primary key. Use an instead of trigger to handle the inserts and updates. And then look at using surrogate keys to resolve these bad design issues...
5 out of 4 people don't understand fractions.
Thank you,
Tony Miller
Webster, TX

How to use Read table with out key fields

Hi Experts,
I need to retrieve the 2 internal tables data into single table.
I have 3 common fields between the 2 tables but I don't have the Key fields. Then how to use the read table in this.
Thanks in Advance.
Edited by: satish4abap on Mar 10, 2010 9:39 AM

Hi Satish,
Key fields are nothing but the common fields with which you can pick the data from the second internal table.
If you can paste your Internal table fields then we will be able to assit you better.
However, in genral scenarios you can use it as below :
In this scenario, we are putting data from 3 internal table to another single internal table.
LOOP AT T_PRGEN INTO WA_PRGEN.
       WA_FINAL-GUID_PR       = WA_PRGEN-GUID_PR.
       WA_FINAL-ATTR20A       = WA_PRGEN-ATTR20A.
       WA_FINAL-ATTR05A       = WA_PRGEN-ATTR05A.
       WA_FINAL-ATTR05B       = WA_PRGEN-ATTR05B.
       WA_FINAL-ATTR05C       = WA_PRGEN-ATTR05C. " + DG1K902190
       WA_FINAL-ATTR10A       = WA_PRGEN-ATTR10A.
    READ TABLE T_V_TCAV201 INTO WA_V_TCAV201 WITH KEY ATTRV20 = WA_PRGEN-ATTR20A BINARY SEARCH.
    IF SY-SUBRC = 0.
      WA_FINAL-TEXT1   = WA_V_TCAV201-TEXT1.    "SUBID-TEXT1
    ENDIF.
    READ TABLE T_PNTPR INTO WA_PNTPR WITH KEY GUID_PR = WA_PRGEN-GUID_PR BINARY SEARCH.
    IF SY-SUBRC = 0.
       WA_FINAL-PRVSY = WA_PNTPR-PRVSY.   "PROD NO
       WA_FINAL-GRVSY = WA_PNTPR-GRVSY.   "LOGICAL SYS GROUP
    ENDIF.
append wa_final to t_final.
endloop.

Anyone know how to use a 'home' and 'end' key on the Macbook pro keyboard?

I had a pc before, and the keyboard had home and end keys on the keyboard for quickly moving cursor to end or beginning of word or sentence. I can't figure out if there is something like that on the Macbook pro. It would be really helpful. So does anyone know if there is those keys and if so what do i use?
I'd appreciate any help.
Thanks

see if any of this works for you
On a smaller keyboard, such as the wireless, or on portables, you can use fn- left arrow for home and fn- right arrow for end.
On a Mac, 'home and 'end' take you to the beginning and the end of document, respectively. Getting to the beginning or end of a line is done with cmd- leftarrow and cmd- rightarrow. Emacs shortcuts, such a ctrl-a and ctrl- e also work in most places, where the app is done right.

How I use 2 AI with 1 AO in the same program without hardware errors?

I have a machine with a Motor (velocity controled with PWM), a Strain Gauge, and a Encoder (inner the motor). This machine is controled with a LabVIEW 6.1 program in a computer with Intel Celeron 1.5Gb 360 Mb RAM and DAQ 6024E.
In my program I have two AI Adquisition Waveform blocks with AI different ranged Channel (the firts in my Strain Gauge ranged -9 to +9 V) and the second in my encoder ranged 0 to +5 V), and one AO Generate Waveform (the PWM signal ranged 0 to +5 V). When I put on the program, the motor Glitches an my computer turns slow. It´s cause me problems!
Whats the problem?

You would probably get more info on this in the DAQ Discussion Forums, but I can help you out a bit here. The VIs that you are using are very high level VIs so there is a lot going on behind the scenes that you do not see. More importantly, they are synchronous, meaning that you have to wait until they're finished to do anything else. This is probably why your computer is slowing down. The UI may even freeze until you have acquired all the points you requested. I would suggest using the more advanced DAQ VIs to control your system. There are many examples that ship with LabVIEW which demonstrate how to use these. They allow you to build an asynchronous acquisition system so that other tasks may operate while the DAQ board is acquiring data.
J.R. Allen

How to use a ipad with out putting in the linked apple id in it

.

You will never be able to use this iPad.
This article explains:
Find My iPhone Activation Lock - Apple Support

Updateable columns with primary key

Hi,
I use HTML DB 2.0 and 10g R1.
With HTML DB i would like create an application with 2 pages.
The first page is an report from a table with 2 columns, the first column is datatype number(10) with primary key and the second column is varchar2(255).
The report should looks like with an edit-icon for all rows and both columns with header.
My problem is, the report has only 2 columns, not 3 columns and the edit-icon is together with the first table column, the header name is Edit.
What can I do ?
The second page should be a form linked from the first page for update, insert and delete rows. It's not possible to use a sequence on column with pk for new inserts.
I don't know, which sample application has the same content or what I have to do.
Who can help me ?

Simply create an application "Report and Form" based on your table and modify it as follows:
- On the report page, modify the query to include the PK column a second time (using an alias)... if this was based on the EMP table with EMPNO being the PK, the query then looks like this (modification bold):
select
"EMPNO",
"EMPNO" as "EMPPLOYEE NUMBER",
"ENAME",
"JOB",
"MGR",
"HIREDATE",
"SAL",
"COMM",
"DEPTNO"
from "EMP"
where
instr(upper("ENAME"),upper(nvl(:P1_REPORT_SEARCH,"ENAME"))) > 0 or
instr(upper("JOB"),upper(nvl(:P1_REPORT_SEARCH,"JOB"))) > 0
- In the report attributes, move the added column to the desired position (I moved it directly next to the edit link).
- On the Form page, just change the item holding your PK column from "hidden" to "Text field".
You may take a look at http://htmldb.oracle.com/pls/otn/f?p=PK_VISIBLE:1 to verify this is what you're looking for.
Edit: Oops - I just recognized I cannot update the EMPNO on page 2 since the automated row processing depends on an unchanged PK. However - normally it isn't a good idea to update a PK anyway (since it might be used as FK in some other table(s)).
It is possible to create new records with manually adding the new PK, so if this is really all you need, then I would suggest you modify your edit page displaying the PK column read-only when editing an existing row and updatable when adding a new record (using 2 items with conditional display, based on the PK being NULL or NOT NULL).
Holger
Message was edited by:
schweich

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

Mapping in OWB with primary key and foreign key relationship

Hi all,
I am new to this datawarehousing field. I have just started my career. I have to now create a mapping in owb where a table has a field which is a primary key of another table in the same staging area. If you guys could help me out with the a method it can be created that would be very helpful to me.
I thought of 2 ideas,
1. If I can use a look up, but then I am not sure if i can use a lookup for primary key, foreign key relationship. If I can use also, I do not know how to use that.
2. What if I can directly take that the first table and link the primary key of that table to the second table which uses that primary key of the first table as one of its fields.
I do not know how feasible these methods are. Please guys help me out.
Thanks in advance.

I have a similar case where table a and table b having relation but table a got inserted with data and table b is empty so there no values for foriegn key column in table b to realte with table a.
Now i want to load table b foriegn key with primary key column values of table a.
how can we do this in owb
thanks
kumar

Entity bean with primary key generated by trigger

Hi,
We have a table(oracle) with one column as primary key,
but the primary key is generated by trigger every time
a new row is inserted into this table, inside the trigger,
it uses oracle sequence to get the next val.
If we want to use entity bean with it, what should we specify, it's not application-managed primay key, it's
not auto-generated primary key either. How can we resolve
it without change the database part.
Any thought is appreciated.
Thanks
afang

The code is already there with JDBC call inserting
into the table, the inserting trigger then will generate
sequence key and being inserted into primary key column.
Now wondering if it's possible to change the code to use entity bean but without modifying the trigger (since it contains other business logics).

Another user has changed the row with primary key -Table changed externally

Hello,
I am facing the error: "Another user has changed the row with primary key oracle.jbo.Key[94 ]." during the delete operation.
User case scenario:
1. Added new row in the table.
2. Once new row is added to the the table, another application will update few columns in the newly added row based on some logic.
3. On the same session I am trying to delete the newly added row and getting above mentioned error.
I have added a "Button" in the table to partialRefresh the table to check the new values of the changed columns.
I have checked the forum and found many similar errors and tried the following but nothing helped.
1. By setting "Auto Refresh = True" for the view object.
Issue faced-> It worked fine but after few add and remove my db is getting to inconsistent state after which, I am not able to do any add/delete from my page.
Error: "Too many objects match the primary key oracle.jbo.Key". I have checked this and I am not getting this error when "Auto Refresh = False" even after multiple add and remove actions.
2. By Setting "Auto Refresh" the iterator associated with the page.
Issue -> Did not work at all.
Looking forward inputs from gurus.
Thanks
Abhijeet

Finally I found one solution to this problem at: [ http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/|http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/]
Simply overriding the lock() method in the entity object resolved issue. Kudos to the author.
Code:
public void lock() {
try {
super.lock();
} catch (RowInconsistentException e) {
refresh(REFRESH_WITH_DB_ONLY_IF_UNCHANGED | REFRESH_CONTAINEES);
super.lock();
But, Now my refresh button is not working as depend on the "Auto Refresh = True" to update the table.
Can anyone tell me how can I refresh the VO of my table from the button.
Thanks
Abhijeet.
P.S: I have already added the partial trigger but it is work not working as the data is cached in the VO. Removing the Cached property for the VO is creating other problems.

How to impliment a auto increamenting primary key feature in ADF ??

How to implement an auto incrementing primary key feature in ADF ( With out using database Triggers)
Edited by: Dinil Mithra on Apr 24, 2009 2:28 AM
Edited by: Dinil Mithra on Apr 24, 2009 2:59 AM

Dinil,
Create a sequence in the database.
Read section 4.11.5 of the Fusion Developer's Guide - which has sample code to get the next sequence value from Java without a database trigger.
John

Error on commit: Another user has changed the row with primary key : Rec_10

i am using jdev 11g R2
i implemented a master form and two detail tables on a jspx page
added createInsert, commit and rollback buttons
actions from these buttons all are executed from a bean
for entity attributes: refresh after insert and update are marked as checked
i am using login page for authorizing the user by getting the user information from user table
and then using the userid i am applying the setVisible property on some components at bean code
when i am inserting a new row there is no problem, here i am generating the new id like 'Rec_10', using a database sequence
but when i am trying to update a current record, it is showing the error --> Error on commit: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[Rec_22 ]
on clicking the commit button and also it is not updating the record on database
Thanx in Advance
kumar
Edited by: user10922309 on Nov 18, 2009 3:25 AM
Edited by: user10922309 on Nov 18, 2009 4:28 AM

Hi John
thnq for your quick responce.
here are the attribute details:
Attribute Name: RecID, Type: String, Value Type: Expression, Value: 'Rec_' + (new oracle.jbo.server.SequenceImpl("Rec_SEQ_AN", object.getDBTransaction())).getSequenceNumber()
Updatable: While New and Primary Key, Queryable, Persistent, Mandatory, Refresh After: Update, Refresh After: Update and Insert are markded as checked
error details:
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[APP_22 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1062)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:548)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:7762)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5554)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6057)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6229)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3127)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2935)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1991)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2233)
     at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1580)
     at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1404)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1289)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
     at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:201)
--> at Index.saveApplicationAll(Index.java:6246)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
--> on click commit button Index.saveApplicationAll method will invoked.
Thats it.
Kumar
Edited by: user10922309 on Nov 18, 2009 4:32 AM

Insert row with datapages/bc4j problem with primary key

Hi everybody,
i tryed to insert a new row into a table with primary key (id) and therfore used a datapage, where there is a html-form and the data tag set attribute to get the data into the BC.
I also want to use a sequence for the primary key and made a trigger to insert the key-value before insert. but in this case it doesnt work. I also tryed to get the sequence to the BC -Layer (so that i can set the PK in the View OBJ already) with a View Object but I dont know how.
so what schould i do??
thanxx
Martin

There's a know issue, when creating a record with blob, the blob content won't show until committing. The blob is added too late, which means you're in trouble with not-null fields...
Sue, is this logged as a bug? And the dialog captions?
K.

How to use AttributeHierarchyOptimizedState property with Primary Key of the Dimension?

Similar Messages

Maybe you are looking for