How to use Audacity to capture streaming audio

Hi all-
I have Audacity and am trying to figure out how to capture streaming audio from an internet radio station. Have heard this is possible, but as yet have not been able to figure out how to do it. Any ideas?
DK

Hello,
but when I created a package and added OdiWaitForLogData, pb began. the step that has OdiWaitForLogData succeed. but my interface failed. the step "Load Data" failed.why?
There is no reason for that. WaitForXXX does not affect the data stored in the CDC infrastructure, but just detects it.
- What type of CDC are you using: simple or consistent set?
- Did your interface used journal data only?
- What error did you get precisely on the "Load Data" task?
Could you tell me how to schedule a package?For scheduling, I think you should have a look at "Generating a Scenario" in the user manual. under the generated scenario node, you'll see the schedule node and you can start scheduling from here.
Regards,
-FX

Similar Messages

  • How to Capture Streaming Audio

    I'm looking for a technique or app for capturing streaming audio from my 3GS. Any ideas?

    Check the app store as I know there are apps that will stream and capture audio.  Basically, the app that is doing the streaming has to do the capturing as well.  Otherwise, any recording app running in the foreground mutes the audio from any backgrounded app.

  • Capturing streaming audio on Macbook Air?

    I want to capture streaming audio from a website on my MacBook Air. But is this possible when the MBA lacks an external microphone? How do I go about it? The sound quality needs to be decent. My compture is brand new and has OS X10.9.1 if that's relevant. Many thanks!

    There are tons of such audio (and video) capture apps on the APP STORE, such as twisted wave, sound studio, Amadeus,etc etc
    more professional and pricey APPS such as Adobe tools, screen flow, capture screen.
    most of the cheap ones can be had for $5 or so.
    Why do you need a Mic? audio can be captured internally.    Your Air does have an onboard external mic on the left side, either 2 holes, or older Air one larger multi-hole mic input.
    for web audio however you want to use an application.  

  • How to Use Adobe For TV Stream

    I Have a question How to make adobe with Tv Stream,i will googling but i don't see any question Exampla TV http://tvonlineindonesia.pathmo.com

    Could you ask a question in more detail?
    Do you want to use DRM with your streaming video?
    Or, you have a question how to use flash player for streaming video?
    Thanks,
    Hiroshi

  • I need to capture streaming audio and save to a wav file

    I need to be able to capture an audio stream delivered via ethernet using UDP protocol and then save to a wav file.
    I currently can capture the data stream but do not know how to format the data to save it to a file. Our format is 16KS/s, 16bit, PCM, no compression.

    Did you do the thing about searching in the example database. Let us use that as base for discussion. Those who put in some effort will be rewarded. Also check out the AU file format http://en.wikipedia.org/wiki/Au_file_format As it is big-endian http://en.wikipedia.org/wiki/Big-endian the numbers can be stored as is in Labview. Must players,matlab, etc can use the AU file format.
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Use FMS & Actionscript to Stream Audio/Video and control (powerpoint) slides

    Hi there,
    My compnay provides webcasting services to numerous clients, and we currently use Windows Media Encoder as our base software for these projects.
    However, I'm interested in switching to Flash Media Server, but need to figure out one issue and how to implement it in such a way like how we are currently using Windows Media Encoder.
    We need a way to stream out a live audio/video feed AND have a way to control a presenter's POWERPOINT slides and have them advance by our command when streaming live.
    Basically, the way we do it is we will stream out audio/video from WME and also use the encoder's SCRIPTING functions to send out a "url"  from the encoder to the actual page in which the viewer is watching the live embedded stream.  On that page is an embeded/internal frame which we can specify (using the id/name) that the url gets loaded, and this actually advances the slides (or more so pulls up a pre-created html page of the next slide in the person's powerpoint, which is actually a screenshot or exported image of that slide and embedded within a specific HTML file and hosted on the same server as the embedded player/html file)
    Would there be a way to send out this same type of script using FMS?   I've been playing around with it and notice the interface itself does not have a built in scripting function like Windows Media Encoder does. However, I did read somewhere that it supports ActionScript... but I have no clue how to implement this feature.
    I am just curious how it might be able to go about doing this?  Is there a way to use an [action]script with FMS and have it send out a URL to a specific frameset embedded on the same page as the Flash Media Encoder Playback?
    Hopefully this make sense and that someone can point me in the right direction.  Switching to FMS over Windows Media Encoder is the way I would love to go, just need to figure out how this could be done.
    Would a better method be converting the powerpoint slides to a swf or flv file, embedding that file within the same page as the FMS playback, and somehow using a script to "advance" the frames/slides/scenes within that file?
    I also heard something about Flash "Shared Objects" and how this could be a way of controlling a swf file remotely.....
    Could anyone give me some advice and know a method that I could use to achieve this type of implementation?
    Any help is GREATLY appreciated!   Thanks!

    FMS (the interactive version, FMIS) has complete scripting support.
    What you want to do can be done with FMS, and there are a lot of ways you can approach it. Converting to .swf can be helpful, as it means you have a single resource to load rather than a bunch of individual slide images (the flashplayer can load .swf, jpg, gif, png). Rather than embedding, I'd opt to make it an external resource and load it at runtime... that would keep the player application reusable.
    To get an idea of how to use server side actionscript, see the getting started portion of the FMS 3.5 dev docs
    http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/
    Then, see the SSAS docs for the following classes in particular:
    The Client class for Client.call()
    The Stream class for Stream.send()
    The Shared object class
    The Application class for BroadcastMsg()
    The docs give some general overview for the usage of each. The best choice really depends on your deployment architecture and scalability requirements.

  • How to use a bluetooth cellphone for audio input and output

    Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
    Thanks!

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

  • What extenstion will allow me to capture streaming audio/videos?

    I am trying to capture a streaming video of a program broadcast by Fox News which is not protected. I understand that in the past versions of Firefox some of the extensions or free applications would allow the video to be captured (per CNET). What is the application or extension I need to capture streaming videos using the FLV format or any of the other popular formats?

    Hi Pat,
    What I want to do is download the on-line videos/live streaming video but the source of them doesn't make them available as download files.
    As regards Flash Player Pro, apparently I was looking at something else entirely.  Sorry for the misleading statement.

  • How to use Changed Data Capture?

    Hello,
    I want to use CDC to load my DW in real time. I am testing ODI in that mode.
    I have two tables:
    SRC Employe (empl_ID, name, surname, salaire, age) and TRG Employe( empl_ID, name, surname, CreDate, UpdDate) on SQL Server 2005. I wish to load data from SRC Employe to TRG Employe. I want that this data are charged in real time.
    how to do this? I know that I must use OdiWaitForData and OdiWaitForLogData but in ODI documentations, explanations are not sufficient.
    how to use OdiWaitForData and OdiWaitForLogData?
    thanks in advance
    Billyrose

    Hello,
    but when I created a package and added OdiWaitForLogData, pb began. the step that has OdiWaitForLogData succeed. but my interface failed. the step "Load Data" failed.why?
    There is no reason for that. WaitForXXX does not affect the data stored in the CDC infrastructure, but just detects it.
    - What type of CDC are you using: simple or consistent set?
    - Did your interface used journal data only?
    - What error did you get precisely on the "Load Data" task?
    Could you tell me how to schedule a package?For scheduling, I think you should have a look at "Generating a Scenario" in the user manual. under the generated scenario node, you'll see the schedule node and you can start scheduling from here.
    Regards,
    -FX

  • How to use 5105 to capture 1second data at 40MHz / Channel , for 4 channels

    Dear all,
    I am using a 5105 SCOPE to try to capture 1second signal at 40MHz , for 4 channels.
    So of course, i send the Min. Record Length to 40M & Min. Sample Rate to 40MHz,
    But i got a failure result "Out of memory XXXXX". But if i lower the Record Length to say, 100K,
    the operation is OK.
    So, anyone can help me?

    How much memory does your scope have?  Four channels at 40MHz for one second is 4 * 40M * 1 * 2byte/sample = 320MBytes.  Unless you have the highest memory option (512MBytes), you will not be able to store it all in the scope's memory.  If you have the medium memory option, you may be able to get the job done by streaming data from your device as you take it, although even that will be iffy (PCI bandwidth is practically about 100MBytes/sec or less, depending on system load).  Options are to drop your acquisition rate or your time length, neither necessarily good.  You may be able to drop your resolution from 2 bytes to one, but it has been so long since I used the NI-SCOPE driver and I have never used the 5105 that I don't know if this is even possible.  This would only work if you have the 256MByte memory option.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • How to use pen tool to adjust audio levels

    Hi,
    I've been using the pen tool to adjust the audio levels in FCE. When I do, however, I get curved line segments (kind of like a parabola) between the audio keyframes. I'd like to get something easier to control... i.e. straight line segments. Is this possible? How would I accomplish this?
    Thank you!

    Add a couple more keyframes and adjust them so the line is straighter. You can drag the keyframes along the audio line & move them up & down to adjust the shape of the curve.
    The default shape is curved in order to align with what the human ear considers a 'normal' change in audio levels to be. Human aural sensitivity to changes in audio levels (aka loudness) is not linear - it is more or less logarithmic in shape. That's why the curve.

  • Using AirPort Express to stream audio (non-iTunes)

    Title says it all - is this possible? Apple's description seems very specific to sending iTunes output to a remote stereo - will the system also work with streaming internet audio?

    Out of the box the Airport Express will only stream iTunes output. If you're willing to purchase additional software, Rogue Amoeba's Airfoil will "hijack" audio output from most any program and send it to an Airport Express, Apple TV or another computer on the network using companion Airfoil Speakers software. Available for Mac and Windows, check it out at http://rogueamoeba.com/airfoil/. I have no connection with Rogue Amoeba other than as a satisfied customer.
    Roland

  • How to stream audio in Windows Phone 8.1?

    I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background.  In Silverlight, I used
    BackgroundAudioPlayer to set the Track to a Uri.  It's not clear how to do this with
    MediaPlayer in WinRT.  I don't think I can just use a Uri.  Instead, I wonder if I have to use
    MediaPlayer.SetStreamSource(IRandomAccessStream
    stream).  If so, I don't know how to get an IRandomAccessStream from a
    Uri.  I want to stream from a Uri on the internet over HTTP, not from a local file. Any help?

    Refer following links to stream audio in background in Windows Phone 8.1 Runtime app.
    https://code.msdn.microsoft.com/windowsapps/Background-Audio-in-WinRT-344bcf4d
    http://blogs.msdn.com/b/johnkenn/archive/2013/12/31/supporting-background-audio-in-your-windows-8-1-app.aspx
    Thank you for thinking about my problem. I may be mistaken, but I think the above links refer to Windows 8 apps, not Windows
    Phone 8.1 apps. I'm under the impression that background audio is done differently in Windows Phone 8.1 from Windows 8. The
    Background Audio Overview for Windows Phone Store apps explains more. 
    It's a good overview, but does not explain how to play audio from a stream rather than a file.  That's what I'm stuck on.

  • How can I record streaming audio???

    HP HDX 18T laptop
    Windows 7
    NCH Wavepad sound editor
    Hi, I desperately need help with this issue:
    Is there anyway I can turn "OFF" the speakers so sound does not come from them, but STILL have audio levels active internally so I record streaming audio with my NCH software Wavepad program?
    I've been trying everything .. in the Control Panel setup, I am trying to "capture" streaming audio with my Wavepad program, but I can only attenuate the "mic" levels that the actual laptop picks up .. for example, if there's background noise in the room, it picks that up - I DON'T WANT THAT! - I only want the streaming audio from a recording - not the background sounds in the room.
    Folks at NCH Software keep telling me to check with laptop of Windows advice.
    Wavepad used to do this easily and cleanly before (well, on other computers and other Windows versions)
    If I go into Windows Mixer, and turn down Speakers, it also forces to turn down System Sounds - I do not want system sounds down; only speakers.
    Summary:
    I want to record streaming audio into my audio capture software.
    I want to independantly cancel laptop speaker output, while maintaining audio levels for streaming capture.
    I DO NOT want extraneous sounds in the room's background picked up by the laptop's mic, which then interferes with the recording.
    (or is there a Windows program that will do this for me? I spent $$$ on the deluxe Wavepad software ,, but it's not doing what it used to do)
    Any help, or advice will be GREEEEEEatly appreciated!!!
    Thanks, Michael

    Fixed (I think ....?)
    Turns out there's no "Stereo Mix" option in my Control Panel sound boxes .. apparantly no one else has it either in Windows 7??? depending on sound card ...
    Well, a work-around is to connect a male mini-plug "Y" into [one of] the laptop's headphone outs; then run a mini-plug cord (male-to-male) from it to the laptop mic "in" ... that leaves one unused female mini-plug on the "Y" .. which you can then run your headphones (or speakers ) off of.
    Found that solution online .. got the parts; it works now.
    Still baffled why there's no "Stereo Mix" in Windows 7 ....?

  • Using Flex to capture audio from Flash

    Hi!
    I've been trying for a while to figure out how to capture audio from a flash-application (http://www.delorean.se/mixer)
    and store it as a mp3-file.
    Since I've studied Java for 2 years I thought I'd try and use it to capture the audio but I'm running into problems all the time,
    and I've been advised to look up Flex by other Java users.
    So, I got some questions:
    Is Flex a good tool to use to capture audio from flash-applications and store the audio as a mp3-file?
    Is Flex hard to learn (I've been working with Eclipse for a long time so the IDE shouldn't be a problem and learning another language/framework is always nice)
    Any tips in general?
    Any answers would make me very happy!
    Thanks!

    physical are closed : how will it managed the queues and overspill queues when target is not present? Also the data dictionary must reflect the primary but If you run capture, then you introduce rules that are not on primary: How ?

Maybe you are looking for