How to use Avro Serialization for ASA input

Hi There,
I am trying to use Avro serialization format for Streaming Analytics input data. I am using Event Hub as my data source. Based on the answer to a similar question in this forum about CSV format, it seems like ASA expects header/schema information to
be included with each event, rather than defined externally. So, each of my input events is a proper Avro Data File, with schema included followed by multiple binary records. I have tried to verify this format using the "Test" button in the Azure
Streaming Portal. When I upload a file containing my Avro event, the portal returns "Unable to parse JSON" error. I have double checked that my input is indeed marked as Avro serialization and not JSON.
Can you let me know what the expected Avro data format is?
Thanks,
Dave

Hi Mahith,
I am now able to reproduce the FieldsMismatchError. I am attaching the log. Could you help debug this issue?
Correlation ID:
000593f0-4c05-412b-b096-2cf818bf6e9f
Error:
Message:
Missing fields specified in create table. Fields expected: avgLight, avgOffLight, avgHum, avgLrTemp, avgBrLight, avgBrTemp, avgLrLight, avgOffHum, avgLrHum, avgOffTemp, avgBrHum, avgTemp, groupId, ts. Fields found: avgLight, avgOffLight, avgHum, avgLrTemp, avgBrLight, avgBrTemp, avgLrLight, avgOffHum, avgLrHum, avgOffTemp, avgBrHum, avgTemp, groupId, ts.
Message Time:
2015-01-15 00:28:59Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.hvac-input_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Information
Microsoft.Resources/ResourceUri:
/subscriptions/d5c15d24-d2ef-4443-ba7e-8389a86591ff/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/hvac
Type:
FieldsMismatchError

Similar Messages

How to use PAL-N for Video Input

Is not a problem with the conection or the cables the problem is that source is PAL-N and I see the image in black and white.
Thre isn't a problem with the input of the card because with the same cables and the same connector but with a source in NTSC (a playstation) worked great
My question is if the problem with the sources in PAL-N is a limitation of the hardware or with with software and if it is workaround
Thanks

Quote
Originally posted by kamaleonb
Is not a problem with the conection or the cables the problem is that source is PAL-N and I see the image in black and white.
Thre isn't a problem with the input of the card because with the same cables and the same connector but with a source in NTSC (a playstation) worked great
My question is if the problem with the sources in PAL-N is a limitation of the hardware or with with software and if it is workaround
Thanks
yes men. there are 3 choices .a s-video,a composite and the another one i can't remeber the clear.
And excuse me. did you play "playstaion" on your pc? how can you do that. i have been try for this. but you know ps have 3 line for conect with TV. one for video, one for audio and another one i don't know how to use.
my problem is when i put my ps on my pc. there are only one socket on video card(MX460-VT) for conect video line. no socket for audio in. some body told me it's on the sounds card. but i did. there are only 3 hell. one for speaker, one for microphone the last one is "line-in" so i put the audio line(from ps) in to he line-in . but i got nothing. how can you do this? tell me please!
Thank you very much.

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

"XSL Error: Cannot use a DTMLiaison for a input DOM node"

This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using weblogic
jarfiles here purely so I use the same XML implementation both inside and outside
WLS. Is this a sensible approach?
Any help, anyone?

All works fine in WLS6.1, with this extra code:
System.setProperty("javax.xml.transform.TransformerFactory",
"weblogic.apache.xalan.processor.TransformerFactoryImpl");
(or you could use -D)
No longer concerned; we've moved off WLS6.0
"Simon Spruzen" <[email protected]> wrote:
>
Interestingly, expanding the code to (the very verbose):
Document sourceDocument = event.getDocument();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
StringWriter source = new StringWriter();
XMLSerializer sourceSerializer = new XMLSerializer(source, new OutputFormat(sourceDocument));
sourceSerializer.asDOMSerializer();
sourceSerializer.serialize(sourceDocument.getDocumentElement());
StringWriter output = new StringWriter();
processor.process(new XSLTInputSource(source.toString()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(output));
(i.e. document -> string -> transform -> string)
works just fine, but this code is far too long-winded for me to be happy
with.
(Note that one of XSLTInputSource's ctors does take a Node, so I'm assuming
that
it should be perfectly safe to pass a Document here)
(Note also, that for various reasons at the moment, using JAXP's transformer
factory
is difficult for us)
"Simon Spruzen" <[email protected]> wrote:
This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using
weblogic
jarfiles here purely so I use the same XML implementation both inside
and outside
WLS. Is this a sensible approach?
Any help, anyone?

How to use Batch operation for two xsodata services?

Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
Mj

Gateway Batch Calls from SAPUI5

How to use same actions for differ pop-up

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana

How to use same actions for differ pop-up buttons

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash

How to use Web Serivce for not jsr 172 phone

Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank you

Hi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam

How to use 2 GL for loss made on asset retirement w/o revenue ?

how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.

Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed

Explain how to use standard LSMW for MM01

Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.

Hi
Create a project using 0020 as method.
Max

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

How to use java api for function activity in embed oracle workflow?

because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

How to use a dictionary for multi languages when displaying mess

how to use a dictionary for multi languages when displaying messages??

1st you have to define new messages in the dictionary:-
1.     We have to open the application.
2.     Functional administrator responsibility.
3.     Core services.
4.     Messages.
•     Create message button.
•     Now fill the name of the message that we want to call it from our code in the Code field.
•     Fill the application name with short name of the application.
•     Choose the language.
•     Set the text you want to be displayed.
2nd, Now in the CO in the in the process form request you will code throw new OAException ("application short name","Code").
Now run and see the result.
3rd we want to use Arabic messages, use the same one you have created for saving as an example but you choose duplicate and set the language Arabic.
•     Run the page.
•     Choose preferences.
•     Current Session language = Arabic.
Now you can see the result.

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

How to use Avro Serialization for ASA input

Similar Messages

Maybe you are looking for