How to use BAPI_GOODSMVT_CREATE receipt goods(GR) for subcontract PO

Hi Friends ,
Please any one suggest me, how to use BAPI_GOODSMVT_CREATE to receipt goods(MIGO-GR) form subcontract PO , here my confusion is how to pass Component materials(BOM materials) and their quantity to this BAPI. While reading BAPI FUNCTION MODULE DOCUMENT : i found some information but am unable to understand usage of LINE_ID and PARENT_ID .
Please any one suggest me how to pass values to above BAPI
Thanks in advanced.
Shiv'.

Hi,
Did u check the serial numbers table before calling the BAPI. Might be the case tht same serial number is assigned for all items, in this case the goods movement may be possible with same serial number for all items.
Reagrds,
Aditya
Edited by: aditya on Aug 11, 2009 11:46 AM

Similar Messages

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

How to use the field of 'FM for Determining Address' in report RSWUWFML2?

Dear gurus,
In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
Regards
David

I will test soon. Thanks to all involved.

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
Can you help me resolve this problem ?
Thanks

On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
WSUS has its own, dedicated forum where the WSUS experts answer questions.
You should repost your question here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Paul Adare - FIM CM MVP
Aibohphobia: n. Fear of Palindromes

How to use find my iPhone app for windows pc

How to use find my iPhone app for windows pc ... Is it possible to do..
Or what is the closest app to do that.,,,,,

iPhone User Guide (For iOS 5.0 Software)
iCloud: Find My iPhone
iCloud: Find My iPhone overview
iCloud: Set up Find My iPhone

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
eg:
I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

If the type of inner table is standard table, you should sort the inner table by the fields before user 'DELETE ADJACENT DUPLICATES ', and use COMPARING addtion.
Edited by: Justin on Jun 28, 2009 9:48 AM

SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

Pratik,
Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
An emergency workorder is created in SAP and assigned to the technician.
The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
If you are looking to do something else with GCM that would be outside of Agentry.
--Bill

Bapi : Goods Recipt for Subcontract Po

Hi Friends ,
Please any one suggest me, how to use BAPI_GOODSMVT_CREATE to receipt goods(MIGO-GR) form subcontract PO , here my confusion is how to pass Component materials(BOM materials) and their quantity to this BAPI.
Thanks in advanced.
Shiv'.

Hi,
Check on it:-
Goods Issue against PO
Re: Subcontracting: component issue storage location
pherasath

Goods issue for subcontracting

Hi,
when I post a goods issue for subcontracting with trx MB1B and mvt 541 the system replies with:
For object XABBELEGNR , number range interval 01
does not exist OMJ6
It seems that numeric ranges are ok

Hi,
Number Range for GR/GI Slip Number
Please check in OMJ6 t.code are anybody maintained number range,If not please maintain.
Hope this would help.
Regards,
JS

How to use BAPI_GOODSMVT_CREATE against the Production Order

Hi Friends,
I need ur help very urgently,
I am using the BAPI_GOODSMVT_CREATE (movement code '03') for goods return against the production order (movement type '262').
everything working fine, ie it gets updated in IM/WM.
but when we check in the CO03 transaction for the production order, the qty withdrwan not gets updated in the component overview. still showing the old value. But when we used regular SAP transaction MB1A, it gets updated in CO03 (qty withdrwan in the component overview).
How to solve this issue using this BAPI.
I have attached the code, plese help me is there any other parameter to set for this BAPI.
Thanks in advance.
Shankar
Code:
*Header Structure
st_gm_code-gm_code = '03'. "
st_gm_header-pstng_date = st_gm_header-doc_date = sy-datum.
SORT itab BY aufnr matnr j_3asized.
LOOP AT itab.
itab_afs_gm_itemx-material = itab-matnr.
itab_afs_gm_itemx-plant = itab-werks.
itab_afs_gm_itemx-stge_loc = itab-lgort.
itab_afs_gm_itemx-batch = itab-new_charg .
itab_afs_gm_itemx-stock_cat = itab-j_4kscat.
itab_afs_gm_itemx-stck_type = 'F'.
itab_afs_gm_itemx-move_type = '262'.
itab_afs_gm_itemx-entry_qnt = itab-j_3aerfmg .
itab_afs_gm_itemx-grid_value = itab-j_3asized.
itab_afs_gm_itemx-orderid = itab-aufnr.
itab_afs_gm_itemx-move_reas = itab-move_reas.
APPEND itab_afs_gm_itemx .
SELECT SINGLE etenr
INTO etenr
FROM j_3abdsi WHERE aufnr = itab-aufnr
AND matnr = itab-matnr.
gr_afs-matdoc_itm = '0100'.
gr_afs-sched_line_sku = etenr.
gr_afs-stock_cat = itab-j_4kscat.
gr_afs-grid_value = itab-j_3asized.
APPEND gr_afs.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = st_gm_header
goodsmvt_code = st_gm_code
IMPORTING
goodsmvt_headret = st_gm_headret
materialdocument = mat_doc
matdocumentyear = doc_year
TABLES
goodsmvt_item = itab_afs_gm_itemx
return = bapi_return
afs_goodsmvt_sku = gr_afs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

Hi Friends,
I need ur help very urgently,
I am using the BAPI_GOODSMVT_CREATE (movement code '03') for goods return against the production order (movement type '262').
everything working fine, ie it gets updated in IM/WM.
but when we check in the CO03 transaction for the production order, the qty withdrwan not gets updated in the component overview. still showing the old value. But when we used regular SAP transaction MB1A, it gets updated in CO03 (qty withdrwan in the component overview).
How to solve this issue using this BAPI.
I have attached the code, plese help me is there any other parameter to set for this BAPI.
Thanks in advance.
Shankar
Code:
*Header Structure
st_gm_code-gm_code = '03'. "
st_gm_header-pstng_date = st_gm_header-doc_date = sy-datum.
SORT itab BY aufnr matnr j_3asized.
LOOP AT itab.
itab_afs_gm_itemx-material = itab-matnr.
itab_afs_gm_itemx-plant = itab-werks.
itab_afs_gm_itemx-stge_loc = itab-lgort.
itab_afs_gm_itemx-batch = itab-new_charg .
itab_afs_gm_itemx-stock_cat = itab-j_4kscat.
itab_afs_gm_itemx-stck_type = 'F'.
itab_afs_gm_itemx-move_type = '262'.
itab_afs_gm_itemx-entry_qnt = itab-j_3aerfmg .
itab_afs_gm_itemx-grid_value = itab-j_3asized.
itab_afs_gm_itemx-orderid = itab-aufnr.
itab_afs_gm_itemx-move_reas = itab-move_reas.
APPEND itab_afs_gm_itemx .
SELECT SINGLE etenr
INTO etenr
FROM j_3abdsi WHERE aufnr = itab-aufnr
AND matnr = itab-matnr.
gr_afs-matdoc_itm = '0100'.
gr_afs-sched_line_sku = etenr.
gr_afs-stock_cat = itab-j_4kscat.
gr_afs-grid_value = itab-j_3asized.
APPEND gr_afs.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = st_gm_header
goodsmvt_code = st_gm_code
IMPORTING
goodsmvt_headret = st_gm_headret
materialdocument = mat_doc
matdocumentyear = doc_year
TABLES
goodsmvt_item = itab_afs_gm_itemx
return = bapi_return
afs_goodsmvt_sku = gr_afs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

How to use ALV in web dynpro for ABAP?

Hi,
I am new to web dynpro. Now I want to create a table using ALV to display. I have no idea how to use it.
I only know I need to add the SALV_WD_TABLE for component usage. Can anyone give me some hints
or step-by-step procedure?
Thanks.
Awards will be provided.
Best Regards,
Chris Gu

Hi,
Please go thru this set of [tutuorials|https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/webcontent/uuid/60ea94e5-0901-0010-c3bb-aad5ea9620d8].
Its really good for ALV.
I also used this as I am also new to WD ABAP.
Revert back with issues.
Regards,
Sumit

MAP Toolkit - How to use this MAP tool kit for all SQL Server inventory in new work enviornment

Hi Every one
Just joined to new job and planning to do Inventory for whole environment so I can get list of all SQL Server installed . I downloaded MAP tool kit just now. So looking for step by step information to use this for SQL Inventory. If anyone have documentation
or screen shot and can share would be great.
Also like to run It will be good to run this tool anytime or should run in night time when is less activity?
Hoe long generally takes for medium size environment where server count is about 30 ( Dev/Staging/Prod)
Also any scripts that will give detailed information would be great too..
Thank you
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

Hi Logicinisde,
According to your description, since the issue regards Microsoft Assessment and Planning Solution Accelerator. I suggestion you post the question in the Solution Accelerators forums at
http://social.technet.microsoft.com/Forums/en-US/map/threads/ . It is appropriate and more experts will assist you.
The Microsoft Assessment and Planning (MAP) Toolkit is an agentless inventory, assessment, and reporting tool that can securely assess IT environments for various platform migrations. You can use MAP as part of a comprehensive process for planning and migrating
legacy database to SQL Server instances.
There is more information about how to use MAP Tool–Microsoft Assessment and Planning toolkit, you can review the following articles.
http://blogs.technet.com/b/meamcs/archive/2012/09/24/how-to-use-map-tool-microsoft-assessment-and-planning-toolkit.aspx
Microsoft Assessment and Planning Toolkit - Technical FAQ:
http://ochoco.blogspot.in/2009/02/microsoft-assessment-and-planning.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How i use my network at home for iphone dy usb

how i use network at home for iphone by USB

Look for documentation on setting up a SOCKS Proxy for Linux. Installation on the Mac is almost identical. Here's a good place to start.
<http://www.linux.org/apps/all/Daemons/Proxy.html>

How to use BAPI_GOODSMVT_CREATE receipt goods(GR) for subcontract PO

Similar Messages

Maybe you are looking for