How to use bbm channels

Hi,
in the keynote there was talk about bbm channels, and the press release states that we can 'connect and share' using channels.
Problem is, I can't for the life of me figure out how this bbm app works. The only thing I can find is that I can connect to someone, not to a channel.
So, how do I follow a channel? And if I need a newer OS version, then why doesn't any of the press releases say this?
Using Z10 with 10.0.10.690

The current version Channels is only included in the BetaZone upgrade.
Have you made that upgrade yet?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Tektronix AFG 3022: How to use both channel with VISA

Hi all!
I am trying to control the AFG with LabView using the NI VISA driver. There are several given VIs I can use, but I don´t know how to use both channels at the same time correctly. I attached a VI I made.
Problems are:
-Sometimes it works, sometimes random errors occur.
-The waveform generation doesn´t start at the same time.
-To stop the waveform generation I used the "initialize VI" because I found no better one. Else the generation goes on and on, even though the task was terminated in LabView.
-How can I trigger the AFG with my NI 6259 in LabView?
I hope someone has some good ideas helping me out...
Best regards
Yopp
Attachments:
AWG_out_pulse_2ch.vi ‏36 KB

Hi Benjamin,
thanks for the replay. You helped me out very good! I had the Visa driver. I downloaded the driver in your link and it´s way better (more functionality) than the one I used. I now have a configuration, which is working. But there are two things I still doen´t know:
- How can I put out a trigger signal on the NI 6259. Am I doing this over the normal daqmx VIs? (I, by now, didn´t have the time to try it myself, maybe someone can give me a hint. Saves time...)
- I want to create two signals on the AFG that are the same, but one is inverted. At the AFG it is no problem (output menu-> invert on/off). This function doesn´t seem to be available in the driver. Is there a possibilty to modify the driver and create a VI with that functionality? Can anyone do this for me or explain to me what I need to do it myself and how to do it?
Best regards
Yopp

How to use multiple channels to sample one signal

I would like to use all channels on an AI-110 to sample the same signal in order to increase my sampling rate. (I have spare channels, not spare $$.) In hardware the channels are read sequentially so in theory I should be able to do this, but I'm having trouble reconstituting the signal. If I use FP Reads the timestamps seem to indicate the time of the read, not the time of the A/D conversion, so I can't tell which sample was taken last. FP-Advise on change seems ill-suited as well since consecutive samples may be the same on a certain channel, but the signal may have varied in the mean time on the other channels.
Any ideas how this might be done otherwise? The VI will run embedded on a cFP-2020 controller with LabViewRT v. 6.1.1.
Thanks,
Anton

Anton,
I understand what you are trying to do and do not think it can be done with a single module. The timestamp on the FP-Read is all about when the vi returned the data and not when the A/D conversion occured. I just don't think that the A/D converter can keep track of the conversion time.
If you had multiple AI-110 modules, you could in theory connect your signal to individual channels on multiple modules and then sequence through the modules. The problem here would be the ground loops.

How to use bbm with wifi?

please help.thx

Try posting more detail of your issue.
BBMessenger works fine on WiFi -- AS LONG AS you have a BlackBerry Data Plan on your mobile provider account.
AND, next time post in an appropriate section of the forum, not the Forum Feedback and ideas section.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to use multiple channels with one remoteObject .

hi,
I have an application which is accessed through HPPS some
times , also it can be access on server with http service.
so I want to know how to configure config files or add
runtime channels which will support either channel depending on
the server it is accessed over.
Is there any one who can help me to solve this...i need it
soon.
thank you...

Hi,
Please visit the URL below for details on adding channel sets
at runtime. Add multiple channels to the channel set so that the
fall back mechanism works.
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/runtimeconfig_5.html#194376
Hope this helps.

How to use bbm on PC

Can i to contact with my friends pins via bbm in the Blackberry Simulator or in any other application?

Hey to_the_touch,
Welcome to the BlackBerry Support Community Forums.
BBM is only available on the BlackBerry itself, it will not on simulators or on the PC.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

How to use *MonitorManager* to add custom messages in channel monitoring?

Hi experts,
How to use MonitorManager to add custom messages in channel monitoring for custom adapter development(Not in audit log).
like
Type Time Stamp Message ID Explanation
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing completed successfully
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message with ID 00199942-6e43-02df-96ca-8b538c63dd98 processed
6/25/11 6:39:46 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing started
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing completed successfully
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message with ID 00199942-6e43-02ef-96b1-7650f3495e03 processed
6/24/11 6:43:24 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing started
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing completed successfully
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message with ID 00199942-6e43-02df-9698-5be345a9ddf5 processed
6/23/11 6:45:50 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing started
6/22/11 6:43:30 AM 00199942-6e43-02ef-95ff-2c03493dc078 Message processing completed successfully
Edited by: SAP_PI_D on Jun 28, 2011 12:10 PM

Solve by myself

How to install and use BBM in playbook

Hi,
I have recently purchase a BB playbook and this is my first product from BlackBerry and I am really impressed with it. I would like to know how do I install BBM on my Playbook. Remember I dont have a BB mobile phone.
Mohan

Right now, and for the foreseeable future, there is not BBMessenger installed directly on the PlayBook without having the Bridge connection from an BlackBerry handheld device.
Sorry. RIM has said they are working towards that, but that it likely won't be included in the Feb 2012 upgrade.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WLC Diagnostic Channel: How to use it?

Does anyone know how the "Diagnostic Channel" feature in v4.1 of WLC code can be used to troubleshoot client issues? Once I check the checkbox in the WLAN Advanced properties tab, what are the next steps? Do I need to do anything on the client(s)? Where do I find the logging information the diagnostics produce?
The documentation on this feature is apparently non-existent except a small blip in the command reference guide about enabling it, but no further information on how it's used.
Many thanks,
Justin

I thought the diagnostic channel is used when you are having problems with that WLAN, i.e., that it creates a separate channel between the client(s) and WLAN for sending client-side diagnostic data to the WLC.
Maybe I should back up with the question and start with:
How does the diagnostic channel feature work? Can you give me an example when I would use it?
Thanks for your reply.
Justin

Trying to figure out how to use a video's alpha channel to define its hitspace for a button

Hello, I'm trying to figure out how to use a video's alpha channel to define its hitspace for a button. I would greatly appreciate anyone's help with this.

Currently I'm doing an image sequence inside of a movie, and putting the movie in the button. I hope that's what you're asking. Not sure if I entirely understand your question. (Been a little while since I used the interactive side of Flash)
Anyway if you have a specific process that you personally do that works I'd happily conform to your solution.

How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to control what channel the airport uses

Hey guys I currently have 2 networks that have the exact same SSID and the network that has the stronger signal is not meant to work. I was wondering how I could control the airport to only use a specific channel. I can figure out what channel I need to use, I just need a way to specify to the airport card what channel to use... Thanks.
PS: if it matters I also have a ASUS WL-167g usb adapter that I can use (rausb)

chasechasecchase wrote:
I live on a college dorm and right outside my room the wireless works, but when I come inside it seems to switch to a different channel that does not work (I believe this is intentional because they tell you not to use the wireless in the dorms)... so I am looking to control the airport card not the wireless router
You are not asking us to abet you in breaking some college rules are you? That would violate the rules of these forums.
Rule 8:
"Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act."
It general it's best not to be too chatty and offer too much information unrelated to the actual issue.
"How do I change channels on my Airport?" Is all you needed to ask.
And of course, as others have pointed out you cannot. Like the old OuterLImits, "They" are in control.
Message was edited by: nerowolfe

How to use the CJC channel with 9211 in labview?

Hello there,
I have cDAQ-9172 with the 9211 module for some thermocouple measures.
I want to use 1 channel for the CJC and the others for normal teperature measurements.
I have the VI attached.
Thanks,
Sandro
Attachments:
Cont Acq Thermocouple Samples-HW Timed2.vi ‏46 KB

Hi Sandro,
By "I want to use 1 channel for the CJC", are you talking about using the NI 9211's built-in CJC channel, _cjtemp?
If so, go back to the original example code and set the CJC Source control to Built-In. This will cause DAQmx to use _cjtemp as the CJC source. You won't see the CJC temperature on the graph by default: Reading the CJC Values with the Thermocouple Measurements.
If you have an external CJC sensor connected to one of the thermocouple channels (ai0:3), then create a global channel in MAX (thermistor, or voltage w/custom scale), specify the name of that channel in the CJC Channel control, and set CJC Source to Channel. It's better to use the built-in CJC sensor unless the external CJC sensor is definitely more accurate, and not less.
Regarding the Start button you added to the example VI, I would recommend moving the call to DAQmx Create Channel out of the polling loop so that it doesn't leak memory by creating DAQmx tasks that never get used. Adding a call to Wait Until Next ms Multiple (from the Timing palette) or Wait For Front Panel Activity (from the Dialog & User Interface palette) would prevent the polling loop from wasting CPU cycles.
Brad
Brad Keryan
NI R&D

WheresmyPhone app how to use it?

Hi does anyone know of some kind of tutorial on how to use this app? I am still new to Blackberry apps and have had it installed sometime ago but can't figure it out...thanks

Have you checked with the developer for any instructions or tutorials?
http://appworld.blackberry.com/webstore/content/4672
You app is a third party app, so you might get better assistance directly from the developer.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to use bbm channels

Similar Messages

Maybe you are looking for