How to use Blackberry as modem with Etisalat UAE "Solved"

Follow the next steps & it will guarantee using BB as modem :
I am using BB 9300 + Subscribed to unlimited local BB package which costs "185 DHS" + Windows 7 64bit Home Basic.
First On BB Go to Options > Device > Advanced system settings > TCP IP :
Then put a check mark on "APN Settings Enabled" & On the line below it which says "APN:" write "Blackberry.net" so it will be :
"APN: Blackberry.net"
Then save & exit & restart the connection then follow the next steps On your Computer/Laptop :
1- Open BB Desktop Software & connect ur BB & make sure it's connected
2- Click Start > then type "Set up a dial-up connection" & click it > In "Dial up phone number" box type " *99#" > leave User Name & Password Empty > Click Connect & Enjoy the Internet.

Hi
Emil_hallili wrote:
Hi Guys,
I need your professional assitance on how to perform the subject above.
Not sure about the professional aspect, we are a self-help community.
Try this
http://www.brighthub.com/mobile/blackberry-platform/articles/14915.aspx
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Similar Messages

Pavilion DV3 - how to use as a modem with the internal SIM?

I have a DV3, it has an internal SIM card, which i use often.
I want to be able to use it and send Faxes, but I have no clue how to start.
The only modem installed in Hardware, is the standard modem, I can not access it, nor query it.
Thank you for your advises.

API's will have a Public and Private key which function like a Username and Password. For a given API you will need both. Most online API's use different authintication methods which are not part of the HTTP VI's. There are community toolkits that have been made for a few of the methods. Namely there is an OAuth Protocal Library available. You will need to figure out what is required to communicate to PushBullet. I highly recomend looking at the Twitter API for LabVIEW from the LabVIEW Hackers for information on how they communicated to its API. This may help you create your own.
The API Key's will have to be gotten from the service you are wishing to interface with.
Alex D
Applications Engineer
National Instruments

Configuration for using N73 as modem with Infrared...

Hi,
Can someone from Nokia explain us how to set-up a configuration to use N73 as modem via infrared or Bluetooth.
The N73 manual refers to PC Suite manual, I followed this manual step by step but at the end it doesn't work.
One thing also is that E61 menu refers to a "Connectivity -> Modem" option that is not available on Nokia N73 ?
I tried to set-up a packet connection but it doesn't worked either ?
I use PC Suite 6.81 (the latest version) and XP SP2.
Thanks in advance for your help
Emmanuel

Hi,
Sorry for not coming back earlier.
I contacted Nokia support in France but they never came back to me.
The N73 user manual is saying to follow the PC Suite manual instruction :
"Detailed installation instructions can be found in the user guide for Nokia PC Suite.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite."
I used the mentioned wizard and I got PC Suite connected to the phone by Infrared ok.
Then I disconnect PC Suite and use the "Internet connection" wizard I get the following error message :
"Network connection failed - Modem is used by another application or is badly configured".
As suggested by the on line help I tried the following option :
- Make sure that PC Suite is disconnected before trying to connect (I did and it didn't worked)
- I changed the port used by the connection (and nothing changed)
- I re-installed the modem driver and I even installed SP2 on my configuration (nothing changed)
Somebody mentionned to me that I might have to create a Packet data connection, I did it but again it didn't changed anything.
I'am now almost sure there is an issue using N73 as modem with Infrared.
Worse saying also that my actual laptop configuration is working fine with a 6310i and that my N73 is working fine as a modem when used with USB cable.
One interesting point also is that there is in E61 a "Connection->Modem" menu option that apparently is not existing in N73.
Any new idea welcome
Thank you and best regards
Emmanuel

How to use phone as modem through ups cable

I think it s silly quest..but i dont knw how to use phone as modem using NOKIA pc suit software for internetwork.. i ve installed 7.1version even though pc conneced to my mobile through ups cable type CA-101D. But there s no response in pc.what can i do pls expl clearly now im usg nokia c3-01

Install latest version of Nokia suite(old pc suite). You should get connected.
In Love With My C6-01:Now running on Nokia Belle!

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to use digital av adapter with iphone4

How to use digital av adapter with iphone4

you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
the iphone4 don't support mirror though so only apps which support tv out will work with it

How to use a iPad mini with a projector

How to use a iPad mini with a projector

Use an AirPlay compatible device, such as an AppleTV or an AirPlay compatible AVR.

How to use Crystal Reports 11 with Visual C++ 2005 ?

Post Author: compvis
CA Forum: General
Hello everyone !
Plz tell me how to use Crystal Reports XI with Visual C++ 2005 ?
Thank you so much !

Moved to .NET SDK forum.
Need more info, version of the assemblies you are using and the assembly file system version number ( not the same as what you see in the properties of the project.
As well, what happens if you use OLE DB as a test?
Thank you
Don

How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

Hi Friends,
How to de-activate some functions in the Menu bar?
Eg: - Sales document
             Create
             Change
             Display
I want to de-activate "Change"
In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

Krishna,
It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
*****Reward points if useful
Regards,
Kiran Bobbala

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

How to use Blackberry as modem with Etisalat UAE "Solved"

Similar Messages

Maybe you are looking for