How to use bootcamp from scratch?

A Simple explanation of making a windows 7 install disk, using the os from either a windows 7 computer or a repair disk, and how to use it with boot camp?

From the ones who know best.
Note that you'll have to have a retail version of Windoze, not an OEM version as it comes with a PC, or a "repair disk".

Similar Messages

HOW TO USE CLIPS FROM A DVD???

HOW TO USE CLIPS FROM A DVD???
i know this may be a stupid and obvious question but i can't seem to figure it out.
these are not copyrited dvds... mostly home movies and old home movies put onto dvd.
thank you... much appreciated.

Studio X has given one suggestion.
MPEG Streamclip is another:-
http://www.squared5.com/
It is free but your computer may not have the QT MPEG 2 Playback Component which costs $20 from Apple as a download.
If you have access to an Analogue-DV converter you can use that. Also a DV camcorder which has Analogue IN.
If you have Final Cut Pro installed, you will have the QT component.
Message was edited by: Ian R. Brown

SSAUDIT .alg and .atx files are out of synch. How do I start from scratch ?

After upgrading Hyperion Planning from 11.1.1.3 to 11.1.2.1, the .alg and .atx files that are generated when SS Audit is enabled are now out of synch. How do I start from scratch again ? Stated differently, the row numbers in the .alg file no longer correspond to the .atx rows. How do I "reset" these files so they start again in row 1 ?
I know this must have happned to someone else so I thought a solution could be easily googled and found. I can't find it anywhere.

Stop the application and delete the files. If you want to just keep the changes from the last backup, change in the essbase.cfg SSAudit to SSauditR and then when you do an endArchive it will delete the files and start over

If I use a USB stick for time machine, will I be able to install Windows (using bootcamp) from the same USB?

I have a 64GB USB Stick, and I am interested in usign it with time machine. My question is, firstly, is this possible? And secondly, if I do do this, would it be possible to install windows using bootcamp from the same USB. My mother refuses to let me install windows without a backup of Mac OS X, so I really need to know if this is possible???

You need to use a drive that is larger than your Mac's internal drive for Time Machine, so a USB stick will not work. You need to buy an external hard drive. It's worth it. Time machine is a fantastic backup system, keeping not just a single backup, but multiple versions of your files as well (hence the need for a larger drive).

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

BM,
Pop-Up menu format is not dynamic. It is created in the Cells Inspector and can't be modified contingent upon the state of other cells.
You could program a table to list the options available for the previous selection, but it wouldn't be in the form of a Pop-Up.
Jerry

How to use RAM as scratch disk

Hi,
I am very uncertain about this.
I have a PC with RAM 20GB, Win 7 64 bits. Photoshop CS4.
I have set a hard disk partition as a primary scratch disk.
In the Preferences I have available RAM: 18488 MB
I let Photoshop use 13000 MB (70%).
Every time that I do something on a picture in Photoshop the size of the Photoshop temporary file on the hard disk scratch partition grows.
It seems that my Photoshop uses the hard drive as the scratch disk.
I thought that Photoshop automatically should use extra RAM as a scratch disk.
Have I forgotten to do some setting, or is this the normal behaviour?
How can I force the scratch disk to happen in RAM?
Thanks
/LArry

LarryM01 wrote:
…Every time that I do something on a picture in Photoshop the size of the Photoshop temporary file on the hard disk scratch partition grows…
Perfectly normal, expected behavior.
Photoshop always uses a scratch disk, from the very instant you open an image file or create a new document. Always. No exceptions.
LarryM01 wrote:
…I have set a hard disk partition as a primary scratch disk…
If that's a partition of your boot drive, it's futile and you're much better off leaving the boot drive unpartitioned so as to not limit either the Photoshop scratch disk or the OS swap files. There's nothing to gain because the OS swap files and Photoshop's scratch disk are still competing for the use of the one set of read/write heads.
Bad move. You're just potentially limiting either the Photoshop scratch disk or the OS swap files.
Wo Tai Lao Le
我太老了

How to use images from ADFLib

Hello OTN,
My application is devided into several ADFLibs, one of them is CommonUI. It includes common skin and it is imported into every application part.
There are some images which should be available in different parts, so I decided to put them in CommonUI.
After deploying adflibCommonUI adn refreshing Resource Palette, somehow I expected to see this image there, but it isn't.
Could someone, please, explain me, how to use images contained in imported ADFLib, for example, as imageLink icon?
Thanks.
ADF 11.1.2.1

Hi,
images need to be saved in a specific file structure in the JAR file to be accessible. See:
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/86-images-from-jar-427953.pdf
Frank

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

How to use "Add from POM" to add source path and docpath?

Hi
My team is developing multiple projects with JDeveloper 11gr2.
We share libraries and sources between team members using maven extension for JDeveloper.
We deploy class jar, source jar and javadoc jar to repository.
The project pom has some dependency defined as below
<dependency>
            <groupId>com.example</groupId>
            <artifactId>CommonClient</artifactId>
            <version>0.0.1-SNAPSHOT</version>
            <type>jar</type>
            <scope>compile</scope>
</dependency>
We use ProjectProperties->Mave->Dependencies->Add from POM button to add dependecies to Project.
The problem is that the class jar is added to the classpath but the source jar and javadoc jar are not.
As a result, Team members cannot see the javadoc in code editor.
Configure IDE libraries is an option but does not work well with maven.
Does anyone know how to add source jar and javadoc jar to project using "Add from POM" button?
Thank you!

Hi ,
Sample code snippet for GET_RELATED_CONTENT is as follows :
dataBinder.putLocal("IdcService", "GET_RELATED_CONTENT");
dataBinder.putLocal("dSource","CS");
dataBinder.putLocal("dID","3202");
dataBinder.putLocal("dLinkTypeID","1");
serializer.serializeBinder (System.out, dataBinder);
// Send the request to Content Server
ServiceResponse response = idcClient.sendRequest(userContext,dataBinder);
// Get the data binder for the response from Content Server
DataBinder responseData = response.getResponseAsBinder();
// Write the response data binder to stdout
serializer.serializeBinder (System.out, responseData);
// Retrieve the SearchResults ResultSet from the response
DataResultSet resultSet = responseData.getResultSet("RelatedContent");
// Iterate over the ResultSet, retrieve properties from the content items
for (DataObject dataObject : resultSet.getRows ()) {
System.out.println ("Related ContentID is : " + dataObject.get ("dDocName") );
Point to note is :
dLinkTypeID is set to 1 . Reason being that the rendition related content is used to link items . So looking for those related items which are as Renditions .
This value would be as follows :
dLinkTypeID Related content type
1 Rendition
2 Supersedes
3 Has Supporting content
4 Cross References
2 more sub types are :
Supports - dLinkTypeID=3 and extraparameter is isGetParents=1
Cross Referenced By - dLinkTypeID=4 and extraparameter is isGetParents=1
Hope this helps .
Thanks,
Srinath

ICal: how can I start from scratch?

I'm having recurring and persistent problems with iCal since I bought a new Mac Pro and migrated my user files from my previous computer (G5, which was also running Leopard).
At first, alarms weren't working. I read several threads here and went through a lot of troubleshooting and finally got that working again.
However, iCal is still very slow and buggy. For example, when I create a new to-do and click on the "due date" checkbox, it takes about 10 seconds for the check to appear. The spinning beachball is a frequent sight, and everything from creating new events to setting due dates and calendars takes five times longer than it used to when I was using iCal in Tiger.
I created a backup of my iCal file, and manually exported my calendars for extra protection. Then I used AppZapper to completely uninstall iCal and all related files, and I used Pacifist and the OS X DVDs to reinstall iCal. Then I imported each calendar individually.
This didn't work. iCal is still so unresponsive it's almost unusable. If there were another alternative out there that worked with my iPhone and other applications that sync with iCal, I'd be using it. But because I depend on those other apps I'm stuck with iCal, and I need to make it work.
Is it possible that one of my calendars is corrupted and causing problems? What else can I do to find out where the problem lies?

Harlan83,
to start from scratch, you’ll need the pair of model-specific grey installation DVDs which originally came in the box with your MacBook Pro. You can purchase a replacement pair of DVDs for your model MacBook Pro from either Apple or iFixit.

How to use DOMParser from an Applet / Or, how to parse XML from an Applet?

Hey,
As stating in the subject line, I wonder how to do it without getting an �Access Denied� error.
I would like to parse a XML file that has external DTD pointing to a SYSTEM location. Yes, I can change it to a public location. However, in either way, I have problems to use DOMBuilder to parse the xml file. The application always throws the security exception.
I tried to use the DOMParser from org.apache.xerces.parsers to parse the xml file. I set the DOMParser to ignore parsing the external DTD, and use the DOMParser.parse(InputSource) to parse the xml file from a giving URL. However, I get null of the result document.
Does anyone know how to parse the XML from an Applet? Or, does anyone know how to use the DOMParser from an Applet?
Thank you very much,

If the document resides on the local filesystem, you will need to sign a CAB or JAR for the applet to circumvent the sandbox's security restrictions. There are dozens of posts on how to do this. Basically, that will turn the applet into an application, from a Java security perspective.
- Saish
"My karma ran over your dogma." - Anon

How to use payload from standard RFC MessageType in a RFC Lookup function

Hello
We have a DB sender to call an BAPI. The DB receiver gets the BAPI response.
It is an easy scenario with one mapping.
But the RFC Mapping Lookup is very awful. You have to rebuild all open and close tags to get the RFC payload. A lot of concat functions are a must. The error search in such a mapping is not easy and seems like EAI developing 1990 (Hand am Arm).
Ok, it is better as a BPM, but it is not well for first level support person and release changes and trouble shooting.
How can I use a XML payload from first mapping in my RFC Mapping lookup (second mapping)? There must be a way with two mappings and an easy RFC lookup.
Currently (one mapping):
DB sender format -> ( RFC lookup self-made RFC XML structure) DB receiver format
My dream (two mappings):
DB sender format -> RFC SAP XI standard Format ->(RFC lookup by using Payload from first mapping) DB receiver format
I hope someone can help me with an example.
Daniel

Hi Daniel,
If i understood correctly, urs is a 'Asynch' scenario JDBC to JDBC with a RFC lookup in Mapping.
If its so, then i think wat u r expecting can be done. In Interface Mapping, u can add more than one message mappings.
So first do a Mapping for DB sender format - RFC input standard format,
then another one for RFC sender Format - RFC receiver format, (look up code goes in this mapping).
Then third one from RFC receiver format to DB receiver format.
The order n which u add in Interface Mapping is also important. This is a suggestion, i havent tried this, but still i think u can give it a try.
Regards,
P.Venkat

How to use image from a file in signature appearance.

Hi,
I am creating a Plugin for acrobat 9, using PubSec using DocSign sample as basis. I have created the appearance using text objects and the logos data that came with the DocSign sample. But I want to use image from a file (like, jpg) in the signature appearance creation. So far the documentation doesnt tell how to achieve this.
Can you please tell me in a "How-to" kinda way to achieve this?
Thanks in advance.

Thanks for ur prompt reply.
There are so many samples in the sdk. which one is the "sample for adding images."?

JCA Classpath - How to use library from rar instead of from WLS

We have a stand-alone resource adapter that uses the apache commons net library, and relies on features added in version 2.0.
When we deploy to WLS 10.3.2, we get a class loading error when invoking the adapter. Method org.apache.commons.net.ftp.FTPClient.setConnectTimeout(T)V is not found.
WLS 10.3.2 includes an older version of the library: com.bea.core.apache.commons.net_1.0.0.0_1-4-1.jar.
Despite paclkaging the proper version (2.2) in our rar, the older and incompatible 1.4.1 version from the system classpath is used.
Is there a way to use the version packaged in our stand-alone rar file? I have seen a way to do this for a war file (prefer-web-inf-classes in deployment descriptor).
O know we could to modify the system classpath in the weblogic startup scripts to use the newer library. We prefer not to do this, since we don't know how WLS uses the library internally, and what might be affected by a different version.

unfortunately, standalone adapter has not prefer-web-inf-classes or similar feature support.

How to use bootcamp in mackbook air with out Disk drive..please help

Please help me how to install windows 8 using boot camp with cd drive to install on patition mac HDD

It is almost 99.9% in the FAQ and How To on the support page and inside Boot Camp Assistant instructions (and pdf)
http://www.apple.com/support/bootcamp
Walks you through how to use USB flash devices

How to use bootcamp from scratch?

Similar Messages

Maybe you are looking for