How to use bootcamp in mackbook air  with out Disk drive..please help

Please help me how to install windows 8 using boot camp with cd drive to install on patition mac HDD

It is almost 99.9% in the FAQ and How To on the support page and inside Boot Camp Assistant instructions (and pdf)
http://www.apple.com/support/bootcamp
Walks you through how to use USB flash devices

Similar Messages

  • How to use webdynpro abap? need separate software? or please help me.. :-)

    How to use webdynpro abap? need any separate software? if no, please help me with Transaction Codes..
    Thanks in Advance
    -Parthi
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Oct 19, 2011 8:18 PM

    I don't think you quite understand how hibernation mode works.
    "The state of a computer is stored into its main memory, which is also called RAM. When a
    computer is powered off, the contents of this memory are irremediably wiped out. Hiberna-
    tion works in the following way: before being powered off, the computer saves all the con-
    tents of the memory to a file on the hard disk drive. On wake up, data stored in this file is
    read out and restored to the memory. Therefore, the RAM contents are the same before
    and after the hibernation process, and the state of the computer is also the same. The
    saved file is named sleepimage, and is located in the /private/var/vm directory. Hi-
    bernation is sometimes also called “software suspend” or “suspend to disk”.
    The default suspension feature of Mac OS X, called sleep works in a different way. When
    entering sleep, every subsystem of the computer is shut down, except the main memory
    which is still powered. This process preserves the contents of the memory, and allows the
    computer to wake up quickly. However, a sleeping computer still consumes a small
    amount of power. Sleep is sometimes also called “hardware suspend” or “suspend to
    RAM”.
    Apple introduced the safe sleep feature in Mac OS X 10.4.3 for the Powerbook HD line of
    laptops. This feature is a variation of the default suspension behavior. The main memory is
    still powered during the sleep, but the contents of the memory are also saved to the disk at
    the beginning of the operation. The saved file will only be used if the laptop runs out of bat-
    tery power while sleeping, in order to restore the original state of the computer.
    This safe sleep feature is what makes hibernation possible in Mac OS X 10.4.3 and above."
    Quoted from *Deep Sleep v. 0.7 documentation*
    Matthieu Beaumel, 10/03/2006

  • How to load turbotax on mac air with usb super drive

    i am trying to load turbo tax and cant get it to install.  i have a mac air and a usb superdrive. 

    I have TurboTax 2012 and have done it.  First, plug the SuperDrive into your USB port.  Then insert the TurboTax CD into the drive.  You will see the TurboTax icon and a folder icon representing your application folder on your desktop.  SImply drag the TurboTax icon over on top of the folder icon (as the arrow represents), let the action complete, and you will be done installing TurboTax!
    Finally, remember to eject the TurboTax disk from the SuperDrive before unplugging the drive from your USB port.  Depending on how you have Finder set up, you may have to hunt for the drive's icon.  It may be in Finder's sidebar.

  • I just received my iPad mini for christmas and it came with a case with a keyboard and I'm not sure how to get the keyboard to work with the iPad. Please help!

    I cant get my ipad minis' keyboard to work how do you connect it?

    is it something i need to charge or is it bluetooth powered?

  • How do I reinstall on a MAC with no disk drive?

    It appears that on my work computer there is not a complete edition of ADOBE CREATIVE SUITE 5.5 DESIGN STANDARD present. I have the two original discs but the computer does not appear to have a compact disc drive. When I go to adobe on line all I seem to find is places to purchase the program. Help?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.4 (win) 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Nullpointer exception with oracle thin driver, please help

    Hi All
    I am getting a null pointer exception when i invoke getBinaryOutputStream on a
    OracleThinBlob. The code is given below
    java.sql.Blob b = rs.getBlob(1);
    OutputStream blobOS = ((weblogic.jdbc.vendor.oracle.OracleThinBlob)b).getBinaryOutputStream();
    blobOS.write(objectToByte(validator));
    blobOS.close();
    The exception is given below.
    BODY: java.sql.SQLException: java.lang.NullPointerException:
    Start server side stack trace:
    java.lang.NullPointerException
    at oracle.sql.LobPlsqlUtil.plsql_getChunkSize(LobPlsqlUtil.java:1215)
    at oracle.sql.LobPlsqlUtil.plsql_getChunkSize(LobPlsqlUtil.java:121)
    at oracle.jdbc.dbaccess.DBAccess.getLobChunkSize(DBAccess.java:955)
    at oracle.sql.LobDBAccessImpl.getChunkSize(LobDBAccessImpl.java:111)
    at oracle.sql.BLOB.getChunkSize(BLOB.java:228)
    at oracle.sql.BLOB.getBufferSize(BLOB.java:242)
    at oracle.sql.BLOB.getBinaryOutputStream(BLOB.java:202)
    at weblogic.jdbc.rmi.internal.OracleTBlobImpl.getBinaryOutputStream(Orac
    leTBlobImpl.java:127)
    at weblogic.jdbc.rmi.internal.OracleTBlobImpl_WLSkel.invoke(Unknown Sour
    ce)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
    a:274)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
    .java:22)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    End server side stack trace

    Thanks for informing the group!!. What was the root cause of the error?

  • In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    WoW! I'm surprised by the speed you reply and how serious you are with your answers! Thank you very much guys!!!
    Replying to Toad-Hall:
    I have a proper mailing list created as the manual says. It's a small group of contacts that exist in the address book. I do not type them as CC I just write "clients" and before I finish the word the name of the list appears.
    How can I stop Avast from scanning out going mail? It's the free version and I haven't found a real solution. I also tried to totally turn off the "mail shield" but I kept facing the same issues. However, I just turned it off and tried to send the mail, I didn't restart windows or thunderbird
    The idea with ipage server was fantastic! It would never come to my mind!!! As far as I see, the limit is 250 mails per hour. I doubt if I have ever reached the 50% of it. I also don't reach the bandwith limits... Besides that, if I had exceeded the limit I would get multi responses that "mail was not delivered".
    I want to thank you both for your excellent help so far. I'm sad to say that I still haven't solved the issue. When I made smaller lists, with the same addresses chosen from the address book I could send the messages, having a short delay. I would blame Avast but I tried the same on another laptop with my favourite NOD32 and had the same problem.
    What else should I check? Should I focus on Avast?

  • How to decompres bootmgr on macbook air with bootcamp

    how to decompres bootmgr on macbook air with bootcamp

    Only by reinstalling OS X:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • ANyone know how to use an Apple keyboard A1359 with a MacBook Air?

    Does anyone know how to use an Apple Keyboard A1359 with a MacBook Air?

    I'm going to ask the hosts to move this to the macbook forum since you're more likely to get answers there than in the iPad one.

  • How to use my Australian Macbook Air 240V in US which uses 110V?

    How to use my Australian Mac Air 240V in US which uses 110V?

    The power supply included with MacBooks are multi-voltage capable. You will simply need a plug adapter for the US power system.

  • How do I view ipod music files with out using I tunes?

    I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
    How do I view ipod music files with out using I tunes?

    they should be under ur my music folder if u have windows

  • How do i pair my macbook air with my iPad??

    How do I pair my macbook air with my iPad???

    What do you mean by "pair"? If you're asking about Bluetooth pairing, the only thing you could do if you paired them would be to share the iPad's internet connection. iOS doesn't have the BT profiles for file sharing or syncing.
    If you're asking about something different, please provide some details.
    Best of luck.

  • How do i mirror my macbook air with apple tv now that i have mountain lion

    how do i mirror my macbook air with apple tv now that i have mountain lion

    Settings-display-look at the bottom for an airplay menu and select your apple tv

  • How to use the same OC4j server with different port number

    How to use the same OC4j server with different port numbers..?
    I have to OC4J installed on my machine on different hard disk drives....
    I want to be able to run both the server simultaneously..?
    is it possible ..it yes then how..?
    for that i have changed the port number of one server...
    but when i am trying to start the other server with different port number..it says that JVM -Bind already...
    Is there any clues...?
    Nilesh G

    In the config directory:
    default-web-site.xml: Change the port the HTTP listener listens on
    jms.xml: Change the port the JMS service listens on
    rmi.xml: Change the port the ORMI listener listens on.
    Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
    Rob
    Oracle

  • How to use "Notes" on my iPad with my existing iCloud address?

    How to use "Notes" on my iPad with my existing iCloud address? It asks me to create a new one...

    Did I overlook some critical info here? I'm having the same problem described by Henry5, but I'm signed in to iCloud with my AppleID which is not the same as my Mobile Me/iCloud email. I keep being asked to create an account (which it won't allow me to do since the account already exists) but no where do I see an option to use the existing account. I also tried logging out with my AppleID account, and using the iCloud email, but that doesn't work.
    I just want to sync my notes and mail... this is really irritating!

Maybe you are looking for