How to use BWITH(WithHolding Tax) in RFBIBL00?

HI,
I am already using RFBIBL00 . Now i have to do the enhancemant and under this WithHolding Tax has to be used. Iread the documentation that BWITh structure has to be used, but iam not getting how to use it.
Plz help

Hi
U should transfer the data of BWITH, just after the data of BBSEG with vendor item:
Structure data:
  BWITH-STYPE = '2'.
  BWITH-TBNAM = 'BWITH'.
Withholding tax codes
  BWITH-WITHT           = <WITHT>.
  BWITH-WT_WITHCD = <WT_WITHCD>.
Base to calculate the Withholding tax value
  WRITE <base amount> CURRENCY BBKPF-WAERK TO BWITH-WT_QSSHB.
The Withholding tax codes have to picked up from vendor table LFBK, the base amount has to be calculate (it depends on the percentage stored in T059Z):
<base amount> = <amount> * T059Z-QPROZ / 100
Max

Similar Messages

  • How AP behaves for withholding tax when vertax is used for tax calculation

    Hi,
    I am currently working on R12 implementation, I have requirement where business has to calculate the USE tax and withhold it from being paid to the supplier in case if use tax is not mentioned on the Invoice and pay it to tax authorities directly by business. Our client has Vertax third party tax engine. now the question is does it works same as it is in oracle payables in cases if client want to use vertax to calculate tax. How oracle behaves for withholding tax when vertax is used for tax calculations.
    Regards,
    Shashi.

    Hi
    Cheque Go to Menubar of  which document you have to  post for getting the WHT value  Menubar Settings - editing options -  remove the tick calculate tax on net amount.
    Rgds
    Vani

  • How to Have Two Withholding Tax Code  in One invoice

    Hello,
    We are using Extended Withholding Tax, and we have defined 9 Withholding Tax type specials, this because is the same withholding type, but we different %, also we have defined more than one Withholding Tax Code, for each one. This kind of Withholding Tax in Venezuela it is called ISAE, and for one invoice I could have more than one ISAE Withholding Tax, in this with have configurated diferents withholdings tax types, but it is a issue because, the system generate one Certificate Numbering for Withholding Tax, but for us this needs to be the same,and only generates one Certificate Number and make the sum of the two amounts. Because is the same Withholding Tax, we need to report only one.
    E.g. I post an invoice 1000999, with two Withholding Tax type, 23 -with tax code 01 and 24 with tax code 02, when i Generate the report I get:
    Vendor Certificate Number Wh. t.t. Wtx Amount in RC wt amount
    10000 00000000001 23 01 90000 2000
    10000 00000000002 24 02 90000 1500
    We need:
    Vendor Certificate Number Wh. t.t. Wtx Amount in RC wt amount
    10000 00000000001 23 01 90000 3500
    We tried to defined only one Withholding Tax type with all the Withholding Tax Code, but the system doesn't allow to post in the vendor master data, more that one Withholding Tax type, we tried to leave it blank, but when we do the FB60, we can´t select multiple Tax Code.
    How we can post a document with more  tham one tax code? or what we have to do to solve the problem?
    I appreciate all the help you can provide me.

    Hello Mauri
    Thanks for your answer, but in this moment we have the configuration exactly like you suggest, but in the moment of we generate the certification number we get two or more numbers, and we only need that the systme generates only one. It is correct that the sistem generates two or more because in one invoice we need and we use two or more wt type ISAE, but for Legal Reasons we need that the system generates only one certificated number, because is the same wt type.  You know if we can do any validation? or we must do anything else to get only one certificated number? we never know or is not a rule to use a specific combination of Wt Type.
    tks Fati

  • How to configure extended withholding tax to get correct 1099MISC

    hi sap guru's
    How to configure extended withholding tax to get correct 1099MISC
      any body help me configuration  and generating 1099misc form.
    raju
    [email protected]

    Hi,
    Pls. check your email. I just sent documents on configuration and reporting for 1099MISC.
    Hope this helps.
    Regards,
    Chirag

  • What is the use of Withholding tax identification number field?

    Hello SAP Experts,
    I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
    Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
    As per SAP:  Withholding tax identification number
    This is a number issued by the tax authorities per withholding tax type.
    This number must be specified in Customizing either:
    (a) As part of the withholding tax information defined for the company code, or
    (b) As part of the withholding tax information defined in the customer or vendor master record.

    Hi Pete,
    The only thing that I could check is the content used in US:
    See content of this field for US:
    LFA1-STCD1      Social security number
    LFA1-STCD2      Employer identification number
    LFBW-WT_WTSTCD  Withholding tax identification number for WT Type
    In order to populate it, please kindly check the following:
    The reason why you cannot fill in the field WT_WTSTCD in transaction
    Fk02 however you can do it in XK02 (Change vendor centrally) can be due
    to wrong customizing of the field status group.
    Kindly check the following:
    SPRO->
    Finantial accounting -> Accounts receivable and accounts payable ->
    Define screen layout per activity (vendors) -> Change Vendor(Accounting)
    Company code data -> W/holding tax data, w/h tax 2 ->
    FIELD Withholding tax code,w/h tax 2 will be probably just available to
    display. Please, change it to optional entry.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • How to configure extended withholding taxes for Bangladesh?

    Dear Experts,
    We are trying to configure extended withholding taxes for Bangladesh as per our client's requirement. However, there is no separate configuration steps in IMG Customizing for Bangladesh.
    Also, we seek to print a withholding tax certificate for Bangladesh.
    Hope to receive some expert advice in this regard.
    Best Regards,
    Akshay Nerurkar

    Hi
    I did for Phillipines which in first week of May 2014 and it did copies the setting of EWT it just I had to activate the functional . Yeah I did some more configure and apply some OSS note as well to work it properly ,
    Please read  63805 - FAQ: Country-specific Customizing settings 
      602901 - Support of country specific functions
    which states all country fo which SAP delivers the Settings
    many Thanks

  • S_pl0_09000447- can i use this for Extended Withholding Tax

    Dear Gurus,
    In my compoany im using Extended Withholding Tax for India, and can i use the Report S_PL0_09000447 - Withholding tax report for the vendor.
    Kindly Advice whether can i use this report for EWT or not.
    if yes how to use it.
    Regards
    karthik

    Hi,
    On the analysis,  the system expects an entry in the T059Q table with
    code as XX.
    The reason being in the extended withholding tax we use multiple
    witholding tax codes and these entries are stored in the table
    with_item. And in BSEG we populate the field withholding tax code i.e.
    BSEG-QSSKZ  with the value 'XX'. In classical withholding tax we used to
    store the code directly which is not possible with Extended withholding
    tax.
    As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
    the entry 'XX" needed in this table for the corresponding country of the
    company code to maintain the correct relationship and consistent
    database information.
    Hence for the statistical purpose and for the internal calculations we
    need an entry in the table T059Q. Could you please maintain this code
    i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
    This should resolve your issue.
    Kind Regards,
    Vanessa.

  • Withholding Tax not populated using BAPI

    Hello
    We are using BAPI to post invoices instead of FB60 but noticed a difference in the withholding tax data.
    Using FB60 when we provide a N1, the tax code shows up as starand the withholding tax exempt is populated along with the  withholding tax code from the vendor master.
    When we try to do the same using the BAPI providing it with N1, it does not populate the withholding tax exempt and withholding tax code fields
    We are using classing withholding tax.
    why the BAPI is behaving differently than FB60 and not picking up the standard configuration
    This is priority as we are in Production and invoices which dont have these withholding  tax information are not getting picked up for payment.
    Thanks

    Solved myself...using the ACCOUNTPAYABLE-W_TAX_CODE field to populate the tax code which is stored on the Vendor Master

  • How to define a document line as Withholding Tax Liable?

    Hi,
    Does anyone knows how to manipulate the Withholding Tax liable property in a document line?
    The property "WTLiable" in the Document_Lines object is a read property. So i can't set a value to this field via DI API.
    I'm working with SBO version 2004.
    Kind Regards,
    Ivan

    Luis:
    Thats because you cannot change the WTLiable status in the SBO either.
    To set the Withholding tax, you must change it in the Business Partner master data.
    Harold Gómez V.

  • In fbl1n report for document type RE  withholding tax amount is not showing

    in fbl1n report for document type RE  withholding tax amount is not showing
    in sap note 363309 determines
    Solution
    Remove the field which contains the withholding tax information (field BSEG-QSSHB) from your display
    variant.
    If you want to display the withholding tax information, double-click on the document number and
    subsequently choose 'Withholding tax'.
    my doubt is we remove the field BSEG-QSSHB in layout how can show the withholding tax amount in FBLIN report
    how to remove from the layout
    please clarefy
    bhayyapu   

    Hi,
    If you want to check amounts of withholding tax for the vendors, you have some options to view it. You can access the WITH_ITEM, LFC1 tables by SE16. You have too the S_P00_07000134 report. This report is developed for the Colombia but I already used for the another country with the ABAP development for this country.
    Also you can use table join BSIK and WITH_ITEM by SQVI for the open items and BSAK and WITH_ITEM for cleared items. It is more simple and fast.
    JPA

  • Standard LSMW for open vendor items with Withholding tax

    Hi All,
    I am searching the direct input LSMW which is having the Withholdig tax. There is a direct input program in LSMW ( RFBIBL00) but it is not uploaded the withholding tax for open vendor and open customer items.
    If anybody know which LSMW is recammanded or anthing related to BAPI or IDOC for this requirements.
    Dhiraj.

    Hi
    If you need to upload the WT tax you have to fill the structure BWITH of std BI RFBIBL00, so your LSMW project should create a file like this:
    ---> Session data
    BGR00
    ---> Document data
    BBKPF (Header data
    BBSEG (Vendor or customer item)
    BWITH (Withholding tax data)
    BBSEG (G/L item)
    Max

  • Account set up in withholding tax having two different currencies on dr-cr

    Hi all
    I am using AP, GL and CE. I have set up a new withholding tax which i have connected it with different supplier sites according to the customer needs. Now we are having a problem: When the customer is registering invoices in foreign currency for example in EUR or in USD(my local currency is ALL), the account which is set up in the withholding tax, is touched with the currency of the invoice. Meanwhile the invoice created for the tax authority is created automatically in the local currency and the problem is that the account used in withholding tax is touched from one side with EUR or USD and the other side in ALL.
    The balance of this account is 0, but with different currencies in both sides (debits and credits). My customer does not want this?
    Can you please suggest how can i avoid this?
    Thank you and best regards
    Ernest

    Resolved at our end by tweaking the splitting rule to match the Business requirement.

  • Extended Withholding tax in VIM

    Hi ,
    We are EHP 6 and we are implementing Open Tax for our new company code Philippines . 
    We have activated EXTENDED WITHHOLDING TAX " functionality in SAP and want to use same in Open text .
    We are using VIM 6 .
    Can you please help us on this?
    how to activate extended Withholding tax in VIM 6 for EHP6 .
    many Thanks
    Regards

    Dear Preeti,
    I had similar issue in VIM7 but then discovered that the fields in VIM are displayed as soon as the vendor is subjected to withholding tax. Withholding tax will show up in Tax tab.
    Let me know if it works.
    Best regards,
    Alessandro

  • Extended Withholding tax changeover

    Hi, I  want to activate extended withholding tax for a company that has not used classic withholding tax. The changeover process only deals with moving from classic to extended. How do i move from nothing to extended ??
    transaction WTMG - Company code selection - the system delets company codes for which classic withholding tax has not been used......... so how do I convert the existing data

    Hi Dipak,
    All invoices posted prior to activating EWT do not get paid - details when displaying the line item within F110 say at the bottom in the Note section "Item cannot be paid due to inconsistent withholding tax information". I tried entering an exemption number on the master record with a date range up to the date of activation, but that makes no difference to the error in F110. If I go into the open items and update them for withholding tax, the items then get paid via F110.
    This leads me to believe that all old open items need to be converted.
    Regards,
    James

  • Withholding tax settings(not extended withholding tax)

    Hi,
    I am working on withholding tax(not extended withholding tax). Previously we have one company code for that we created withholding tax and withholding tax codes. Now we are going to create another 2 new company codes. Now how to assign the withholding tax codes to the 2 new company codes.
    In extended i can assign withholding tax codes to company code but in withholding tax how i can assign withholding tax codes to the 2 new company code.
    Regards,
    Sankar

    Hi
    You can assign the same w tax code to another company code also,for that you go through this:
    Path: spro>financial global setting>Withholding tax> extended with holding tax
         Company code  Assign with holding tax types to company codes
    Path: spro>financial global setting>Withholding tax> extended with holding tax
         Company code  Activate extended with holding tax
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

Maybe you are looking for