How to use Callable statements.

Hi.
I'm just new in using JSP. I just want to ask how to call stored procedures (ex. from SQL Server) using the Callable statements. A sample code will be very helpful......
Ex. I have these parameters for my stored proc:
name = "sentiments"; //value will always vary
add = "NJ"; //value will always vary
stored proc name is => usp_updateFile
Thank you very much for your time.

See http://developer.java.sun.com/developer/onlineTraining/Database/JDBC20Intro/JDBC20.html#JDBC2013_4

Similar Messages

  • Calling a procedure/function in CO using Callable Statement

    Hi,
    Please help me in understanding this:
    __method1__
    BEGIN
    :1 := Package.Function(
    param1 => :2"
    ,param2 => :3"
    ,param3 => :4"
    ,param4 => :5"
    END;
    method2
    BEGIN
    Package.Function(:1, :2, :3, :4, :5);"
    END;
    Whats the significance of using method1?
    I have seen the callable statements written as in method1 but, the parameters passed are not in order and not all params are passed.
    When i tried writing similar code, I got "Invalid Column Index" exception. Please let me know how to overcome this.
    Thanks

    Hi,
    You can call a function using Callable Statement as
    public String checkprimarycontact(String pri_loc_id,String org_id,String party_id)
    int p_location_id = 0;
    int p_org_id = 0;
    int p_party_id = 0;
    p_location_id = Integer.parseInt(pri_loc_id);
    p_org_id = Integer.parseInt(org_id);
    p_party_id = Integer.parseInt(party_id);
    String priflag = "";
    try
    Connection conn1 = getOADBTransaction().getJdbcConnection();
    CallableStatement cstmt1 = conn1.prepareCall("{? = call GET_PRIMARY_FUNCTION(?,?,?)}");
    cstmt1.registerOutParameter(1,Types.VARCHAR);
    cstmt1.setInt(2,p_location_id);
    cstmt1.setInt(3,p_org_id);
    cstmt1.setInt(4,p_party_id);
    cstmt1.execute();
    priflag = cstmt1.getString(1);
    catch(Exception e1)
    e1.printStackTrace();
    return priflag;
    Thanks,
    Gaurav

  • How to use perform statements in sap scripts

    how to use perform statements in sap scripts . and pls send me one progam for this
    thnaks
    raja

    Hi Raja,
    <b>PERFORM</b> key work is used to include subroutine in sapscript form...
    But the processing is lttle bit different form the one we use in ABAP.
    Here the paramters passed to form is stored in internal table of name-value table. there are two table one for inbound parameter and other for outbound parameters.
    Check out the example below to see how this is used..
    <b>Definition in the SAPscript form:</b>
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    <b>Coding of the calling ABAP program:</b>
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY ‘PAGE’.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY ‘NEXTPAGE’.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE OUT_PAR WITH KEY ‘BARCODE’.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = ‘|’. "First page
    ELSE.
    OUT_PAR-VALUE = ‘||’. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = ‘L’. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    Hope this is clear to understand...
    Enjoy SAP.
    Pankaj Singh.

  • How to use union statement with declare & set function?

    Hi Experts,
            i  have small query about how to use union statement with declare & set function?
    Example as below :
    DECLARE @name AS date
    Declare @name2  AS date
    /* SELECT FROM [2013].[dbo].[OINV] T0 */
    /* WHERE */
    SET @name = /* T0.DocDate */ '[%1]'
    SET @name2 = /* T0.DocDate */ '[%2]'
    select  '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2013.dbo.orct t1
    inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2013.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
    Union
    /* SELECT FROM [2014].[dbo].[OINV] T0 */
    /* WHERE */
    SET @name = /* T0.DocDate */ '[%1]'
    SET @name2 = /* T0.DocDate */ '[%2]'
    select  '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2014.dbo.orct t1
    inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2014.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

    You have to create stored procedure in SQL only .
    Like u must have create for Crystal .
    You can execute procedure in query manager but you have to enter parameter manually..
    example
    Exec @Test '20140101' '20140501'
    Every time user has to enter it manually in yyyymmdd format in case of date parameters.
    Example
    Create Proc [@Test]
    as begin
    DECLARE @name AS date
    Declare @name2  AS date
    /* SELECT FROM [2013].[dbo].[OINV] T0 */
    /* WHERE */
    select  '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2013.dbo.orct t1
    inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2013.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
    Union
    /* SELECT FROM [2014].[dbo].[OINV] T0 */
    /* WHERE */
    select  '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
    datediff(dd,t3.DocDate,t1.Docdate) as Days
    from 2014.dbo.orct t1
    inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
    left join 2014.dbo.oinv t3 on
    t3.docentry = t2.baseAbs
    inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
    inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
    where t2.DcntSum <> 0.000000 and t3.DocDate between
    between @Name and @Name2
    end

  • How to use CASE statement in WDA

    Hi All,
       Can any one Please expain me ' How to use CASE statement in Web dynpro ABAP? '
      Please give me an example also.
    Thanks in Advance !

    Hi,
    The usage of case statement in webdynpro is same as used in general ABAP.
    Data: l_id type string.
    l_id = wdevent->get_string( 'ID' ).
    case l_id.
    when 'BTN1'.
    when 'BTN2'.
    when 'OTHERS'.
    endcase.
    Regards,
    Radhika.

  • How to use collect statement for below

    data : begin of itab,
             n(3) type c,
          n1 type n,
          k(5) type c,
          end of itab.
    select n n1 from into itab table /zteest.
    *internal table has
    n      n1    k
    gar    100  uji
    hae    90   iou
    gar    90   uji
    hae    87   iou
    I want
    gar 190
    hae 177
    How to use collect statement as n1 is n ..?
    let me know..
    Thanks

    try this..
    DATA : BEGIN OF itab OCCURS 0,
    n(3) TYPE c,
    n1(3) TYPE p DECIMALS 2,
    k(5) TYPE c,
    END OF itab.
    itab-n = 'gar'.
    itab-n1 = 100.
    itab-k = 'uji'.
    COLLECT itab .CLEAR itab.
    itab-n = 'hae'.
    itab-n1 = 90.
    itab-k = 'iou'.
    COLLECT itab .CLEAR itab.
    itab-n = 'gar'.
    itab-n1 = 90.
    itab-k = 'uji'.
    COLLECT itab .CLEAR itab.
    itab-n = 'hae'.
    itab-n1 = 87.
    itab-k = 'iou'.
    COLLECT itab .CLEAR itab.

  • How to use multiple statements inside the "THEN" block of CASE statement?

    Below is the code:
    SET @strTempString = case @strKeyMode
    WHEN 'AUTO/CYCLE'
    THEN  @strRefID + '|' + @strRetID
    WHEN 'CYCLE'
    THEN  @strRefID + '|' + @strRetID
    WHEN 'COMMERCIAL'
    THEN  @strRefID + '|' + @strRetID
    WHEN 'ISNAP'
    THEN  set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + '  ', 2) + '  ', 2))))
    '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType
    WHEN 'ASNAP'
    THEN  @strRefID + '|' + @strRetID
    WHEN 'MOAT'
    THEN  @strRefID + '|' + @strRetID
    else '0'
    end 
    The first 3 conditions are understandable. How to use multiple statements in 4th case?
    Here I first want to set the value as:
    set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + '  ', 2) + '  ', 2))))
    and then return the string '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType to @strTempString. 
    Please help me remove the syntax errors.
    Thanks in advance.

    Try below SQL
    DECLARE @strKeyMode varchar(20) = 'ISNAP'
    DECLARE @SQL VARCHAR(MAX)
    DECLARE @strRefID int=1
    DECLARE @strRetID INT=2
    --FIRST WAY
    IF @strKeyMode ='AUTO/CYCLE'
    SELECT CAST(@strRefID as varchar(10))
    ELSE IF @strKeyMode ='CYCLE'
    SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
    ELSE IF @strKeyMode='ISNAP'
    SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
    ELSE
    SELECT @SQL='ABC'
    print @sql
    ----SECOND WAY
    SELECT @SQL = CASE @strKeyMode
    WHEN 'AUTO/CYCLE' THEN CAST(@strRefID as varchar(10))
    WHEN 'CYCLE' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
    WHEN 'ISNAP' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
    ELSE 'No Record'
    END
    PRINT (@SQL)
    --Prashanth

  • How to use " PERFORM ", STATEMENT WITH OFFSET

    hI,
    How we use Perform statement with offset, like
      Example:   " PERFORM READ_SEGRELEASE USING INT_EDIDC+11."
    My requirement is to use Perform with Automatic length declaration.
    Automatic length declaration in PERFORM statement
    Kindly Explain and Provide some Example programm written in this situation.
    Thanks,
    P.N.Kumar

    Hiere is an example of what you probably require:
    DATA:
    lv_offset        TYPE syoffi,
    lv_length        TYPE flength,
    lv_field          TYPE string.
    lv_field  = 'This is my value: hello world'.
    lv_length = 5.
    lv_offset = 18.
    PERFORM read_segrelease USING lv_field
                                                            lv_length
                                                            lv_offset.
    *&      Form  READ_SEGRELEASE
    *       text
    *      -->P_LV_FIELD  text
    *      -->P_LV_LENGTH  text
    *      -->P_LV_OFFSET  text
    FORM read_segrelease USING    p_lv_field         TYPE string
                                                         p_lv_length      TYPE flength
                                                         p_lv_offset      TYPE syoffi.
      DATA:
      lv_result    TYPE string.
      lv_result = p_lv_field+p_lv_offset(p_lv_length).
      WRITE: / lv_result.
    ENDFORM.                    " READ_SEGRELEASE

  • How to use collect statement

    hi everybody,
    how to use collect statement to get the total amount paid to different vendor payments 
    data : begin of wa occurs 0,
            bukrs type bsak-bukrs,
            lifnr type bsak-lifnr,
            land1 type lfa1-land1,
            name1 like lfa1-name1,
            dmbtr like bsak-dmbtr,
            count type i value 0,
            tot_vend  type i,
            vend type i.
    data :end of wa.
    data : itab like table of wa.
      select distinct bukrs lifnr waers from bsak into
    corresponding fields of wa
              where bukrs in s_bukrs
              and   lifnr in s_lifnr
              and   bschl in s_bschl.
    i want the total amount paid according to vendor i am  using this way but i am not getting
      loop at itab into wa.
    wa-dmbtr = bsak-dmbtr.
    collect wa-dmbtr into itab.
    modify itab from wa transporting dmbtr.
    i am unalbe to get it
    can anybody help me regarding this if possible with example.
    thanks in advance,
    regards,
    venu.

    Hi Venu,
    types: BEGIN OF ty,
            NAME(20),
            SALES TYPE I,
          END   OF ty.
    data : itab type standard table of ty,
    itab1 type standard table of ty,
    wa type ty,
    wa1 type ty.
    wa-NAME = 'Duck'.  wa-SALES = 10.
    append wa to itab.
    wa-NAME = 'Tiger'. wa-SALES = 20.
    append wa to itab.
    wa-NAME = 'Duck'.  wa-SALES = 30.
    append wa to itab.
    loop at itab into wa.
    wa1 = wa.
    collect wa1 into itab1.
    endloop.
    loop at itab1 into wa1.
    write : / wa1-name , wa1-sales.
    endloop.
    COLLECT is used to create unique or compressed datsets. The key fields are the default key fields of the internal table itab .
    If you use only COLLECT to fill an internal table, COLLECT makes sure that the internal table does not contain two entries with the same default key fields.
    <b>If, besides its default key fields, the internal table contains number fields (see also ABAP/4 number types ), the contents of these number fields are added together if the internal table already contains an entry with the same key fields.</b>
    If the default key of an internal table processed with COLLECT is blank, all the values are added up in the first table line.
    In the program you mentioned yesterday,I am not able to get the logic since many lines are commented.

  • How to return Multiple ResultSets Using Callable Statement

    hi everybody,
    while i was working with callable statements i came across a problem of how to fetch Multiple Resultsets by means of Stored Procedures written for tables in Oracle.
    If any one can help me, pls do help me with a detailed explanation, and if possible do get me a example source code too.
    khumaar

    I have a similar problem with oracle and jdbc:
    I want to send a sql query like:
    sqlQuery = "select n1, n2 from table1; select n1, n2
    from table2"
    I used a prepared statement, but when I call
    .execute(sqlQuery)
    oracle doesn't like this,
    can someone help on this?Try putting a begin/end around it. Play with the syntax first in sqlplus.
    You do realize that you MUST extract using the syntax for extracting multiple result sets correct? It will NOT work as one result set.

  • Statement closed when using callable statements with oracle xe

    hi all, i've got this problem with oracle express edition 10g. I am using also oc4j v10.1.2.0.2. When working with a normal oracle database it was working fine (i think the code was the same, it's some time since i last tried, but you can see the code is very simple).
    So i just create a callable statement like this:
    CallableStatement cs = con.prepareCall(sentencia.toString(), ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE, ResultSet.HOLD_CURSORS_OVER_COMMIT);
    and then when trying to access the statement to register an out parameter like this
    cs.registerOutParameter(1, parámetros[0].getTipo());
    it gives this error:
    java.sql.SQLException: Statement was closed
    It's puzzling me because, as i said before, i think the same code was working ok with a normal oracle database.
    Any idea what can it be?
    cheers

    Ah okay, sorry I've re-read your post.
    I believe you need to create a clob object that encapsulates your xml file.
    I've never done this but I would image it involves creating a class that implements the clob interface and passing an instantiation of this class to the callablestatement.
    Let me know how you get on.

  • How to use collect statement properly

    In PBID table , i will get 4 rows for a material . I will get the corresponding values of bdzei from the same table . Now i will pass this bdzei into pbhi table. then i will get some 200 rows of data. I have to sum up the field plnmg , by grouping the laeda field of pbhi. In short, i need to know the sum of pbhi-plnmg for a particular pbhi-laeda . I know a way to do it. But i want to know how to use the COLLECT statement for this purpose. My output should contain oly 1 line for 1 material ..
    PBID table                      
    Matnr   BDZEI
    p4471   457
            1002
            2309
            2493
    PBHI table
    BDZEI     LAEDA         PLNMG
    1002     06.08.2004     0.000          
    1002     06.08.2004     83.000
    457      07.08.2004     12.000          
    457     07.08.2004     24.000
    Reqd O/p
    MATNR   LAEDA        PLNMG
    p4471  06.08.2004    83
    p4471  07.08.2004    36
    Hope u understood my situation .please help me out ...
    Thanking you in advance ..
    Shankar

    REPORT zppr_zpipr NO STANDARD PAGE HEADING LINE-SIZE 150 LINE-COUNT 63.
    TABLES: pbid,
            pbhi,
            makt,
            mseg,
            mkpf.
    DATA: BEGIN OF it_pbid OCCURS 0,
          matnr LIKE pbid-matnr,        " Material
          status TYPE c LENGTH 4,       " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
          bdzei LIKE pbid-bdzei,
          laeda LIKE pbhi-laeda,
    end of it_pbid.
    DATA: BEGIN OF it_pbim OCCURS 0,
          matnr LIKE pbid-matnr,        " Material
          status TYPE c LENGTH 4,       " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
          bdzei LIKE pbim-bdzei,
          laeda LIKE pbhi-laeda,
    end of it_pbim.
    DATA: BEGIN OF it_pbid_pbim OCCURS 0,
          matnr LIKE pbid-matnr,        " Material
          laeda LIKE pbhi-laeda,        " Reduction Date
          dbmng LIKE pbhi-dbmng,        " Planned quantity in the data base
          plnmg LIKE pbhi-plnmg,        " Planned quantity
          status TYPE c LENGTH 4,       " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
          mblnr LIKE mseg-mblnr,        " Material Doc Number
          pbfnr LIKE pbid-pbdnr,        " Plan Number
          maktx LIKE makt-maktx,         " Matl Desc
          aenam LIKE pbhi-aenam,        " User Changed
          erfmg LIKE mseg-erfmg,        " Qty Invoiced
          budat LIKE mkpf-budat,        " Invoice date
          bdzei LIKE pbid-bdzei,        " Independent requirements pointer
          werks LIKE pbid-werks,        " plant
          pirrednqty TYPE i,            " PIR Reduction Quantity        = pbih-plnmg - pbih-dbmng
          diff TYPE i,                  " Difference
          slno TYPE i,                  " Sl No
    END OF it_pbid_pbim.
    DATA: BEGIN OF it_allrows OCCURS 0.
            INCLUDE STRUCTURE it_pbid_pbim.
    DATA: END OF it_allrows.
    *DATA: BEGIN OF it_final OCCURS 0.
           INCLUDE STRUCTURE it_pbid_pbim.
    *DATA: END OF it_final.
    DATA: BEGIN OF line,
          matnr LIKE pbid-matnr,        " Material
          laeda LIKE pbhi-laeda,        " Reduction Date
          plnmg LIKE pbhi-plnmg,        " Planned quantity
          maktx LIKE makt-maktx,        " Matl Desc
          dbmng LIKE pbhi-dbmng,        " Planned quantity in the data base
          mblnr LIKE mseg-mblnr,        " Material Doc Number
          pbfnr LIKE pbid-pbdnr,        " Plan Number
          aenam LIKE pbhi-aenam,        " User Changed
          erfmg LIKE mseg-erfmg,        " Qty Invoiced
          budat LIKE mkpf-budat,        " Invoice date
          bdzei LIKE pbid-bdzei,        " Independent requirements pointer
          werks LIKE pbid-werks,        " plant
          pirrednqty TYPE i,            " PIR Reduction Quantity        = pbih-plnmg - pbih-dbmng
          diff TYPE i,                  " Difference
          slno TYPE i,                  " Sl No
          status TYPE c LENGTH 4,       " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
    END OF line.
    DATA Itfinal1 LIKE STANDARD TABLE
                OF LINE
              WITH DEFAULT KEY.
    DATA ITfinal LIKE ITfinal1.
    DATA: BEGIN OF it_dates OCCURS 0,
          date TYPE sy-datum,
    END OF it_dates.
    DATA: l_slno TYPE i.
    DATA: l_zebra TYPE c.
    SELECT-OPTIONS:
          s_werks FOR pbid-werks obligatory.
    SELECT-OPTIONS:
          s_matnr FOR pbid-matnr.
    SELECT-OPTIONS:
          s_pbdnr FOR pbid-pbdnr.
    SELECT-OPTIONS:
          s_laeda FOR pbhi-laeda obligatory.
    parameter:
          c_print type checkbox.
    SELECT matnr bdzei FROM pbid INTO (it_pbid-matnr, it_pbid-bdzei) WHERE werks IN s_werks AND matnr IN s_matnr AND pbdnr IN s_pbdnr.
      it_pbid-status = 'PBID'.
      APPEND it_pbid.
    move-corresponding it_pbid to it_pbid_pbim.
    Append it_pbid_pbim.
    ENDSELECT.
    SELECT matnr bdzei FROM pbim INTO  (it_pbim-matnr,it_pbim-bdzei) WHERE werks IN s_werks AND matnr IN s_matnr AND pbdnr IN s_pbdnr.
      APPEND it_pbim.
    Append it_pbid_pbim.
    ENDSELECT.
    *break-point.
    START-OF-SELECTION.
      LOOP AT s_laeda.
        it_dates-date = s_laeda-low.
        APPEND it_dates.
      ENDLOOP.
      DATA: l_startdate LIKE sy-datum.
      IF s_laeda-high EQ space.
      ELSE.
        l_startdate = s_laeda-low + 1.
        DO.
          IF l_startdate <= s_laeda-high.
            it_dates-date = l_startdate.
            APPEND it_dates.
          ELSE.
            it_dates-date = sy-datum.
            EXIT.
          ENDIF.
          l_startdate = l_startdate + 1.
        ENDDO.
      ENDIF.
    *break-point.
      LOOP AT it_pbim.
        LOOP AT it_dates.
          it_pbim-laeda = it_dates-date.
          it_pbim-status = 'PBIM'.
          MODIFY it_pbim TRANSPORTING laeda status.
          MOVE-CORRESPONDING it_pbim TO it_pbid_pbim.
          APPEND it_pbid_pbim.
        ENDLOOP.
      ENDLOOP.
    break-point.
      l_zebra = 'X'.
      DATA: l_toterfmg LIKE mseg-erfmg.
      DATA: l_erfmg LIKE mseg-erfmg.
      data: l_totpir type i.
    **************************************PBID*************************************
      LOOP AT it_pbid.
        move-corresponding it_pbid to it_pbid_pbim.
           append it_pbid_pbim.
        SELECT SINGLE maktx FROM makt INTO (it_pbid_pbim-maktx) WHERE matnr = it_pbid-matnr.
        MODIFY table it_pbid_pbim TRANSPORTING maktx.
        SELECT aenam laeda FROM pbhi INTO (it_pbid_pbim-aenam,it_pbid_pbim-laeda) WHERE bdzei = it_pbid-bdzei AND aenam = 'Abbau-'.
           MODIFY TABLE it_pbid_pbim TRANSPORTING aenam laeda. " debug here
        select single sum( dbmng )  sum( plnmg ) FROM pbhi INTO (it_pbid_pbim-dbmng,it_pbid_pbim-plnmg) WHERE bdzei = it_pbid-bdzei AND aenam = 'Abbau-' and laeda = it_pbid_pbim-laeda..
           MODIFY TABLE it_pbid_pbim TRANSPORTING dbmng plnmg. " debug here
       endselect.
        it_pbid_pbim-pirrednqty = it_pbid_pbim-dbmng - it_pbid_pbim-plnmg.
           MODIFY table it_pbid_pbim TRANSPORTING pirrednqty.
        IF ( it_pbid_pbim-laeda IN s_laeda AND it_pbid_pbim-aenam EQ 'Abbau-' ).
          MOVE-CORRESPONDING it_pbid_pbim TO it_allrows.
          append it_allrows.
        ELSEIF NOT it_pbid_pbim-laeda IN s_laeda.
              delete it_pbid_pbim index sy-tabix.           " debug here
        ENDIF.
        ENDSELECT.
      ENDLOOP.
    **************************************PBIM*************************************
      LOOP AT it_pbim.
        move-corresponding it_pbim to it_pbid_pbim.
           append it_pbid_pbim.
        SELECT SINGLE maktx FROM makt INTO (it_pbid_pbim-maktx) WHERE matnr = it_pbim-matnr.
           MODIFY table it_pbid_pbim TRANSPORTING maktx.
        SELECT aenam laeda FROM pbhi INTO (it_pbid_pbim-aenam,it_pbid_pbim-laeda) WHERE bdzei = it_pbim-bdzei AND aenam = 'Abbau-'.
           MODIFY TABLE it_pbid_pbim TRANSPORTING aenam laeda. " debug here
        select single sum( dbmng )  sum( plnmg ) FROM pbhi INTO (it_pbid_pbim-dbmng,it_pbid_pbim-plnmg) WHERE bdzei = it_pbim-bdzei AND aenam = 'Abbau-' and laeda = it_pbid_pbim-laeda..
           MODIFY TABLE it_pbid_pbim TRANSPORTING dbmng plnmg. " debug here
        it_pbid_pbim-pirrednqty = it_pbid_pbim-dbmng - it_pbid_pbim-plnmg.
           MODIFY table it_pbid_pbim TRANSPORTING pirrednqty.
        IF ( it_pbid_pbim-laeda IN s_laeda AND it_pbid_pbim-aenam EQ 'Abbau-' ).
          MOVE-CORRESPONDING it_pbid_pbim TO it_allrows.
          append it_allrows.
        ELSEIF NOT it_pbid_pbim-laeda IN s_laeda.
              delete it_pbid_pbim index sy-tabix.           " debug here
        ENDIF.
        ENDSELECT.
      ENDLOOP.
    sort it_allrows by matnr laeda status.
    **********************************ALL ROWS************************
    loop at it_allrows.
      line-matnr = it_allrows-matnr.
      line-laeda = it_allrows-laeda.
      line-plnmg = it_allrows-plnmg.
      line-dbmng = it_allrows-dbmng.
    line-mblnr = it_allrows-mblnr.
    line-pbfnr = it_allrows-pbfnr.
      line-maktx = it_allrows-maktx.
    line-aenam = it_allrows-aenam.
    line-erfmg = it_allrows-erfmg.
    line-budat = it_allrows-budat.
      line-bdzei = it_allrows-bdzei.
    line-werks = it_allrows-werks.
      line-pirrednqty = it_allrows-pirrednqty.
      line-diff = it_allrows-diff.
      line-slno = it_allrows-slno.
      line-status = it_allrows-status.
      collect line into itfinal1.
    endloop.
    loop at itfinal1 into line.
      collect line into itfinal.
        write: / line-matnr, line-plnmg, line-dbmng,line-laeda,line-status..
    endloop.
    skip 4.
    loop at itfinal into line.
      write: / line-matnr, line-plnmg, line-dbmng,line-laeda,line-status..
    endloop.
    break-point.

  • HOW TO USE PERFORM STATEMENT IN SMARTFORMS

    Hi,
    Can anyone tell me how to use call subroutine in smartform?
    Thanks & Regards,
    Gauarv.

    Hi,
    Hope this helps you..
    You can use the PERFORM command to call an ABAP subroutine
    (form) from
    any program, subject to the normal ABAP runtime
    authorization
    checking. You can use such calls to subroutines for
    carrying out
    calculations, for obtaining data from the database that is
    needed at
    display or print time, for formatting data, and so on.
    PERFORM commands, like all control commands, are executed
    when a
    document is formatted for display or printing.
    Communication between a
    subroutine that you call and the document is by way of
    symbols whose
    values are set in the subroutine.
    The system does not execute the PERFORM command within
    SAPscript
    replace modules, such as TEXT_SYMBOL_REPLACE or
    TEXT_INCLUDE_REPLACE.
    The replace modules can only replace symbol values or
    resolve include
    texts, but not interpret SAPscript control commands.
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of
    the four
    SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must
    therefore be
    character strings.
    The ABAP subroutine called via the command line stated
    above must be
    defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.
    The values of the SAPscript symbols passed with /: USING...
    are now
    stored in the internal table IN_TAB . Note that the system
    passes the
    values as character string to the subroutine, since the
    field Feld
    VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR
    80). See the
    example below on how to access the variables.
    The internal table OUT_TAB contains names and values of the
    CHANGING
    parameters in the PERFORM statement. These parameters are
    local text
    symbols, that is, character fields. See the example below
    on how to
    return the variables within the subroutine.
    From within a SAPscript form, a subroutine GET_BARCODE in
    the ABAP
    program QCJPERFO is called. Then the simple barcode
    contained there
    ('First page', 'Next page', 'Last page') is printed as
    local variable
    symbol.

  • HOW TO USE "WITH" STATEMENT IN MESSAGES

    MESSAGE e001 WITH WERKS  SY-REPID
    TELL ME HOW TO USE "WITH" IN MESSAGES SEND SYANTAX AND EXAMPLE CODE

    Messages e001(zz) with Var1 var2 var3.
    For this statement to be valie, the variables var1 var2 var3 should be defined alrteady in the program.
    and in se91, you should define a message class (Say ZZ ).
    In that message class you can create a message with number (Say 001) with place holders (&).
    001: & is a sampele message for & hgh  & hjknkn
    The & will get replaced by the variables var1 var2 var3 in the run time.
    YOu can also create success messages if yo say:
    Messages S001(zz) with Var1 var2 var3.
    Information
    Messages I001(zz) with Var1 var2 var3.
    Warning:
    Messages W001(zz) with Var1 var2 var3.
    Abend:
    Messages a001(zz) with Var1 var2 var3.
    REFER sample programs : DEMO_MESSAGES       
    DEMO_MESSAGES_SIMPLE
    Regards,
    Ravi
    Message was edited by:
            Ravi Kanth Talagana

  • How to use prepared statement by Application Module on ADF?

    Hello
    i am using a prepared statement on the view side of my project,
    this is my code, i'm not sure about using this code.
    AppModuleGFTImpl am = (AppModuleGFTImpl) Configuration.createRootApplicationModule(amDef,config);
    try {
    ps =am.getDBTransaction().createPreparedStatement("Select * from XXXXXX where kullanici_id=? and sifre=?",0);
    ps.setString(1, kullanici);
    ps.setString(2, sifre);
    rs = ps.executeQuery();
    if (rs.next()) {
    girebilir = true;
    } else {
    girebilir = false;
    ps.close();
    rs.close();
    //am.getDBTransaction().closeTransaction(); ? I'm not Sure
    //Configuration.releaseRootApplicationModule(am, true); ? I'm not Sure
    Is it True? How we use this code on the project view side? Must we close Transaction, or release application Module.
    thanks for interest.
    sorry my english.

    Hello, for the SP you can use something like this in your application module
      private static final String BULKSTAMMENN =
        "begin IVA_OWNER.IVA_UI_ALGEMEEN_PCK.USM_SNELLE_INVOER_GUI( P_RLE_ID => :1, P_AANTAL => :2, P_OJR_JAAR => :3, P_RAS_ID => :4, P_TOELICHTING => :5, P_SUCCES => :6 ); end;";
    public void bulkStamen ( int rasId, int telerId, int jaar, int aantal, String toelichting ) {
        CallableStatement bulkStamenSP = null;
        try {
          bulkStamenSP = getDBTransaction().createCallableStatement( BULKSTAMMENN, 0 );
          bulkStamenSP.setInt( 1, telerId );
          bulkStamenSP.setInt( 2, aantal );
          bulkStamenSP.setInt( 3, jaar );
          bulkStamenSP.setInt( 4, rasId );
          bulkStamenSP.setString( 5, toelichting );
          bulkStamenSP.registerOutParameter( 6, Types.VARCHAR );
          bulkStamenSP.executeUpdate();
        } catch ( Exception e ) {
          log.warning( "Aanroep naar " + BULKSTAMMENN + " gefaald, " + e.getMessage() );
        } finally {
          if ( bulkStamenSP != null ) {
            try {
              bulkStamenSP.close();
            } catch ( Exception e ) {
              log.warning( e.getMessage() );
        log.info( "Stammen bulk uitgevoerd voor " + rasId + " " + telerId + " " + jaar + " " + aantal + " " +
                  toelichting );
      }You can then drag this method onto your page or right into your task flow if your using JDev 11.
    Also you can access it from a backing bean although the methods above are preferred
    -Anton

Maybe you are looking for