How to use cam on sites and watch youtube with new OS X Lion?

I downloded the new OS X Lion, and everything is great with it,besides the fact that my cam wont work on sites like Dailybooth or stickam. And i cant watch Youtube videos becuase it tells me that i have to downlad adobe flash and i did but that still didnt work.
how do i fix this?

I don't know about the Flash, but your camera, which appears to be USB and therefor requires drivers, probably does not have drivers compatible with Lion, or you have to download them.

Similar Messages

  • How to use Time Machine before and after installing a new hard drive

    So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

    wjosten wrote:
    Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
    Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk.  However, whenever I swap out a disk I do exactly what you do.  CCC to get the ol drive onto a new one.  Test by starting up to the new (but still external drive).  Then replace the internal drive.
    I usually just sell the old drive on eBay.  My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me.  The price of large external drives is almost the same as smaller internal ones.

  • How to use the video control buttons on YouTube with voice over

    I have a Macbook Pro and since I am totally blind I use the voice over. I am watching YouTube videos but I can't access the buttons at the bottom of the screen. I can't play/pause the videos or use the slider. I ca't use any of those buttons. Is there sometihng I am missing here?

    I dont know if you will be able to connect other device like PS3 or Wii.
    As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
    I presume this is possible due to connection of Microsoft products; MCE and Xbox360
    To be honest; why you dont take a look into the user manual if this notebook is new to you?
    All details are mentioned in the user manual which is already preinstalled on the notebook.

  • How to migrate sites and blogs made with iWeb 1.1.2 into MobileMe?

    How to republish or migrate sites and blogs made with iWeb 1.1.2 into MobileMe?
    I can not find instructions for that, and when trying to publish into .Mac, I consistently get an error message. The sites would look better as they are, but ...

    tortuga wrote:
    How to republish or migrate sites and blogs made with iWeb 1.1.2 into MobileMe?
    If you're referring to last year's transition from .Mac to MobileMe, your iWeb websites are still available at the same URLs and have also been given a new URL at (www.me.com). For example, (web.mac.com/emily_parker/) will work as will (web.me.com/emily_parker)
    tortuga wrote:
    I can not find instructions for that...
    I don't think there's anything special you need to do, but anyway, this Apple doc may be of interest:
    _dotMac to MobileMe transition FAQ_
    tortuga wrote:
    ...and when trying to publish into .Mac, I consistently get an error message.
    What's the exact text of the error msg? This Apple doc may help:
    MobileMe: Troubleshooting iWeb publishing issues
    Also, MobileMe live chat support is now 24/7 — see this announcement.
    By the way, your Public Profile indicates you're running Mac OS X (10.5.4) — if that's true, you should upgrade to 10.5.8 via  menu > Software Update...

  • Hi I'm new in this Ae and i loved it and started to get into editing but when i watch videos on how to use effects like magnify and CC light burst 2.5 it doesn't work why?

    hi I'm new in this Ae and i loved it and started to get into editing but when i watch videos on how to use effects like magnify and CC light burst 2.5 it doesn't work why?

    First, I want to clear up some vocabulary issues. After Effects is not intended for editing video. Editing involves cutting shots together to tell a story. Premiere Pro edits video. While you technically can cut video together in AE, Premiere is much, much better for that.
    After Effects is used for creating shots - visual effects, compositing, motion graphics, animation, color correction, color grading, etc.
    What exact version number of AE (down to the decimal points) are you using? Plus the questions Todd asked, plus the info in the link he gave.
    Also, if you're new to AE, you should really start here. This resource will give you a foundation in how to actually use After Effects that will probably clear up your current problem and prevent much more frustration in the future.

  • I want to talk on skype and watch YouTube same time. But YouTube is too loud. How can I can change the two volumes? Tia!

    I want to talk in skype on my iphone 5, and watch YouTube together. But I can't hear on skype because YouTube is too loud. How can I control the two different volumes?

    This is a user to user support forum.  We are all iphone users just like you.
    You are not addressing Apple here at all.
    This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
    "it's too fragile"
    No it is not.  i have never damaged one, nor has anyone I know.
    " U loose data when Ur phone is locked"
    No you don't.  Why do you think this?
    "and there is no customer support!!!  "
    Wrong yet again.  Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
    "but I will go back with Blackberry "
    Please do.
    Good ridance

  • Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hi
    You can refer to these videos :
    http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
    https://www.youtube.com/watch?v=gZI_K1TXqOM
    Thanks,
    Sanjit

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • How to use external hard drive and iTunes together?

    how to use external hard drive and iTunes together?

    Yes I did get to that part.... I went trough external to retrive itunes folder... When I selected the folder, it said that it was locked, choose another folder... I then went to my external again to my itunes folder and and used command I to see if folder was locked and it wasn't.... it was suggested on another forum to reboot.. which I did and still same problem... All I want to do is link my external hard drive that has my itunes playlist from another Mac to my new one.. and to also use the external as the main source for adding new songs to my playlist...

  • How to use real-time tracking and filing in EchoSign

    Click the link to learn how to use the notification, tracking, and filing features available in the Adobe electronic signatures service, EchoSign.

    Hi,
    You can observe the data for executables with the RTSM. Just be sure to
    first go to the Tolls>>RT Taget [x.x.x.x] Options and configure
    the VI Server to use TCP. Then add your desktop machine to the Access
    List on the TCP/IP Access tab. Now VI server should be able to export
    the info. about the executable.
    Richard
    Applications Engineer
    http://www.ni.com
    Richard
    Field Sales Engineer, New Jersey
    National Instruments

  • How to use a thirdparty look and feel

    how to use a thirdparty look and feel
    i download some from
    http://javootoo.l2fprod.com/
    but how to use?

    Include the downloaded jar file in your classpath.
    Then during startup of your application, call UIManager.setLookAndFeel(className) where className is the class name of your Look & Feel

  • How to use same Data Type and Length for two fields

    How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
    SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
    FROM bsik
    INTO TABLE it_bsik
    WHERE bukrs = p_bukrs
    AND lifnr IN s_lifnr.
    IF it_bsik IS NOT INITIAL.
    SELECT belnr gjahr awkey awtyp
    FROM bkpf
    INTO TABLE it_bkpf
    FOR ALL ENTRIES IN it_bsik
    WHERE belnr = it_bsik-belnr
    AND gjahr = it_bsik-gjahr.
    IF it_bkpf IS NOT INITIAL.
    SELECT belnr gjahr lifnr xblnr
    FROM rbkp
    INTO TABLE it_rbkp
    FOR ALL ENTRIES IN it_bkpf
    WHERE belnr = it_bkpf-awkey+0(10)
    AND gjahr = it_bkpf-awkey+10(4).
    ENDIF.
    ENDIF.
    Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
    Kindly clarify.

    Hi Saurabh,
    Please see the example code that I have developed for you. It will help you solve the problem.
    REPORT ZTEST_3 .
    tables : BKPF.
    data : begin of it_bkpf occurs 1,
             belnr type RE_BELNR,
             awkey type awkey,
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf.
    data : begin of it_bkpf1 occurs 1,
             belnr type RE_BELNR,
             awkey type gjahr,              " change the data type
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf1.
    data : begin of it_rbkp occurs 1,
             belnr type BELNR_D,
             gjahr type gjahr,
             lifnr type LIFRE,
             xblnr type XBLNR,
           end of it_rbkp.
    select belnr
           awkey
           awtyp
           gjahr
           from bkpf
           into table it_bkpf
           where BUKRS = 'TELH'.
    loop at it_bkpf.
    it_bkpf1-belnr = it_bkpf-belnr.
    it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
    it_bkpf1-awtyp = it_bkpf-awtyp.
    it_bkpf1-gjahr = it_bkpf-gjahr.
    append it_bkpf1.
    clear it_bkpf1.
    endloop.
    select  belnr
            gjahr
            lifnr
            xblnr
            from RBKP
            into table it_rbkp
            for all entries in it_bkpf1
            where belnr = it_bkpf1-belnr
    This is just an example. Change the fields according to your requirement.
    Regards
    Abhii
    Edited by: Abhii on Mar 9, 2011 9:08 AM

  • I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    Step by step:
    1. On your main vi Front Panel, create your boolean indicator.
    2. On the block diagram, right click the new boolean indicator and select Create - Reference.
    3. On sub-vi front panel, create boolean indicator (or use one that is already created).
    4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
    5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
    6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
    7. Wire the BoolRefnum to the reference input of the property node.
    8.
    Right click on the property node and select Change to All Write.
    9. Move mouse to point to Visible inside property node box, left click and select Value.
    10. Wire the boolean indicator from step 3 to the Value input of the property node.
    11. On sub-vi front panel, right click on icon and select Show Connector.
    12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
    13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
    14. Save and run.
    Here are the modified vi's.
    - tbob
    Inventor of the WORM Global
    Attachments:
    Pass_a_Reference.vi ‏20 KB
    GL_Flicker_mod.vi ‏83 KB

  • Where do I find a tutorial on how to use photoshop elements 11 and premier elements 11?

    Where do I find a tutorial on how to use photoshop elements 11 and premier elements 11?

    The tutorial courses that got me going were on lynda.com.   Both the PE and PrE courses are taught by instructors that know the software and how to teach on line. 
    The difference between random turtorials and a course is organization.  A course has a beginning, or foundation and builds skills one at a time.  Random tutorials like on Adobe TV or YouTube can be very good but they don't have the sequential skill building process.
    Many of the Adobe TV tutorials are chapters provided by lynda.com as part of their marketing program.  If you like them, you can pay the $25 a month for the full course work.     

  • I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

    I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

    Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
    Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
    I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

Maybe you are looking for