How to use CELLWRAPPER in 10g

Hi,
I need to add CELLWRAPPER while printing a report to a delimited file from
10G report server using 10G print server job scheduler. In 6i Its working fine.
Below code I used in 10G.
V_Cellwrapper := '''"''';
Srw.Add_Parameter(v_Param_List, 'CELLWRAPPER' , V_Cellwrapper);
v_Job := Srw.Run_Report (v_Param_List);
But It is throwing error (ORA-20999). Please help.

Hi,
when I remember right, 20999 is in the range of user defined exceptions. So it's not an error message created by Oracle internally, it's created by a developer (might be in your case inside a trigger). So I would look in the database, when this exception is created. Is there no text with the error-message?
Regards
Rainer

Similar Messages

How to use CELLWRAPPER in 10g for scheduling the job in print server?

Hi Gurus,
I need to add CELLWRAPPER while printing a report to a delimited file from
10G report server using 10G print server job scheduler. In 6i Its working fine.
Below code I used in 10G.
V_Cellwrapper := '''"''';
Srw.Add_Parameter(v_Param_List, 'CELLWRAPPER' , V_Cellwrapper);
v_Job := Srw.Run_Report (v_Param_List);
But It is throwing error (ORA-20999). Please help.

Hi,
when I remember right, 20999 is in the range of user defined exceptions. So it's not an error message created by Oracle internally, it's created by a developer (might be in your case inside a trigger). So I would look in the database, when this exception is created. Is there no text with the error-message?
Regards
Rainer

How to use the Oracle 10g JDBC OCI driver in JBoss ?

Greetings,
I deployed ojdbc14.jar in JBoss and I created an Oracle datasource. I have the following questions:
1. In the datasource descriptor file I have:
<connection-url>jdbc:oracle:oci:@(description=(address=(host=localhost)(protocol=tcp)(port=1521))(connect_data=(SERVICE_NAME=xe)))</connection-url>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
Is it enough in order to use the Oracle 10g JDBC OCI driver ?
2. After having looked-up the datasource and created a connection, the classe of these objects are org.jboss.resource.adapter.jdbc.WrapperDataSource and, respectivelly, org.jboss.resource.adapter.jdbc.WrappedConnection. How can I have access to oracle.jdbc.oci and oracle.jdbc.pool packages ?
Many thanks in advance,
Nicolas

Hello
We were banging our heads on a similar thing, maybe this will help
We needed to convert the wrapped connection to an OracleConnection so that we could do a proxy switch, but maybe you could apply it to your situation anyway
1-you have to convert the Connection object to an OracleConnection in order to use the method that does the proxy switch
The method to do this is getInnermostDelegate()
Once you call this method, you get a new Connection object that can be cast to an OracleConnection object
See below for the snippet of code
// now switch the user and reselect
if (conn instanceof DelegatingConnection) {
properties.put("PROXY_USER_NAME","peter/peter");
oraConn =((DelegatingConnection)conn).getInnermostDelegate();
if (oraConn == null)
out.println("oraConn is null\n");
((OracleConnection)oraConn).openProxySession(OracleConnection.PROXYTYPE_USER_NAME,properties);
2-you have to put a setting in the xml file in conf/Catalina/localhost that allows you to call the getInnermostDelegate() method
By default, Tomcat does not allow you to call this method, it will always return null
You have to change the xml to allow it to return an object
It seems that WebSphere and Tomcat both frown on vendor-specific methods that do not comply with the JDBC standards, but do allow it
Here is the setting:
<parameter>

<name>accessToUnderlyingConnectionAllowed</name>
<value>true</value>
</parameter>
Note, this setting was also put in the conf/server.xml file
Thanks
Peter

How to use AWR in 10g?

Hi All,
I am new to AWR?. How to install and use it for performance data collection and reporting..?
Edited by: jprakash on Aug 13, 2009 11:45 AM

vikrant dixit wrote:
hello,
oracle automatic workload repository (AWR) is OEM tool that collects snapshot every 60 min and generaes snapshot to generate report..you can login to OEM and generate ADDM report, snapshot generated by AWR are used by ADDM to generate database statistics report.Vik,
A small correction, AWR does NOT depend on the EM being there or not. If you have statistics_level parameter set, MMON would do this job on the fly and addm would get invoked as well. Yes, you would not be able to see those good looking charts and all that come from EM but having or not having EM doesn't govern your usage of AWR.
HTH
Aman....

How to use Instant Client 10G DSN-less feature with SQLDriverConnect?

We have been trying to use the DSN-less feature of the latest Instant Client, instantclient10_2, with the ODBC programming interface using SQLDriverConnect.
We are getting ORA-12560 errors and believe that our connect string isn't correct. The docs don't provide an example or indicate the correct keyword(s) to use.
The help file's "Format of the Connection String" page doesn't provide any clues and DBQ is definitely not working.
What format should be used?
Thanks

...So I take it that I'll have to have the server
export to csv or a db format that will provide a
connection on a stock xp or vista box.I'm not sure exactly what you're saying here. Are you suggesting that you'd export the data on the server to a CSV file, copy that to a network share, and have your application create an ODBC connection to the CSV file?
Are you wedded to installing absolutely nothing else? The Oracle Instant Client, for example, just requires copying 3 or 4 DLLs to a directory & setting some environment variables in order to install a minimal Oracle client and ODBC driver (though it won't work with the Microsoft ODBC driver for Oracle). That's normally a pretty minimal burden for an application to include in its installation scripts.
Justin

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use unicode fonts in Oracle forms 10g?

Hi I am working in forms 10g for quite a long time, the software that I have developed so far are all in English language. Now I have requirements to use Bengali Fonts in Forms 10g. I am facing difficulties doing that. Please reply with help. Thanks
Hasan Al Mamun

Check this forum post (though that is for 6i, it would be of helpful for you)
How to use unicode fonts in Oracle forms 10g?
-Arun

How To Execute an Oracle 10g SProc using VS 2005, for Reporting Services

Good day! :-)
Anybody who knows the syntax for executing an Oracle Stored Proc thru ODBC connection using VS 2005 for Reporting Services? I am having a problem about this.
I am using the ODBC connection because VS 2005 does not support Oracle Database 10g in its Oracle Database Connection feature (only 7.3, 8i, and 9i), that's y.
While using MS SQL Server 2000, I never encountered any problem. But using Oracle Database 10g, I find it hard to call the stored procedures, an error is generated everytime.
Please click the link below for the screenshots:
http://www.geocities.com/vrcode2/oraError.JPG
http://www.geocities.com/vrcode2/storedProc.JPG
Please help...thank you so much.
Francis

I'll give you updates about the use of the MS SQL Server Reporting Services with VS 2005 and Oracle, this might be helpful for those who will encounter this same ctuation in the future.
I have discovered that if you're going to connect thru ODBC, even if the connection is successful, the user is still prompted to input a password, which should not be the case when using the Reporting Services. Another thing to take note is the issue about REF CURSOR, we're going to have problems with this. And also the syntax on how you're going to call the stored procedures (with or without input parameters).
With modifications made through Oracle Net Manager, and I tried AGAIN connecting through "Oracle (client)" feature of VS 2005 (even if the list only include Oracle 7.3, 8i, and 9i that are supported) with some changes also, you'd still be able to generate correct data with that solution. If the configuration is correct, you just need to call the stored procedure (with or without input parameter), you won't have any problems about the correct syntax.
I suppose VS 2005 was released earlier than Oracle 10g, that's why 10g wasn't included If ever u'd encounter the same ctuation like mine, and u need the details on how to connect, do not hesitate to ask me.

How to use temporary interface in another interface as derived table in 10g

Hi ,
Can somebody please tell me how to use temporary interface in another interface as derived table in 10g.
I have an option in odi 11g to this task.But i am working on odi 10g for my project.So that please help me to do this task.
I can able to create temporary interface in 10g ,but i dont know how to use that temporary interface in another inerface as derived table.
Thanks in Advance
Thanks,
Srikanth A

A temp interface CANNOT be used as a derived table in ODI 10g.
All you can do is to drag and drop the temp interface as the source in the mapping.
PS. Please remember to assign correct/helpful points to the people who help you in the forum.

How to use help in oracle 10g XE

Hello,
I just wanted to know how to use help in sql command line in oracle 10g XE
regards,
Sreekanth.

Hi thankyou very much for the answer, that web-page is very good but....
I was hoping for answer that would walk me through the help command used in the SQL PLUS like: "help create"
after i have read few manuals i came to know we can use @hlpbld.sql for building help tables it asks me for entering value 1 and 2, after that it exits the prompt and when i re-login i dont see "help command" working...
any comments ot procedure to do this...

Oracle 10g/11g database use on UEK versus Red Hat kernel? How widely used?

Greetings
is there any official or semi-official information regarding how widely used is Oracle UEK to run Oracle 10g/11g database (RAC or single-node) versus running Oracle database on Red Hat Linux or on Oracle Linux with Red Hat kernel ?
I am asking because at my customer site there is a perception that Red Hat (or Oracle Linux with Red Hat kernel) is much more widely used in production to run Oracle 10g/11g database and therefore it will provide better stability even if the performance may be somewhat reduced compared to Oracle UEK option.
So I need some sort of approximate percentage numbers of how well is UEK used in Linux Oracle community to run Oracle 10g/11g databases.
Many thanks.
Yuri B

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise...

How to use oracle servcies in roacle 10g rac

hi all,
I want to know how to use SERVICES in oracle 10g rac.I know how to create servcies i.e using srvctl create servcies or DBMS_SERVICES.
I know servcies can be used with JOBS using DBMS_SCHEDULER but i wat ot know besides jobs what are all the things we can used with services.

Yeah.That's right.
But in my case mwe are having a ERP applicaiton that has been build on oracle forms, so here we are having aeprate forms.Lets suppose that one form name is MEMBER.
and i have also created on servcie using
srvctl add service -d DB -s MEM -r RAC1,RAC2 -a RAC3
now my question how do i integrate this MEMBER form to services i.e MEM.
Like we can use in case oj create scheduling jobs using dbms_scheduler, we are having one prameter job_class where er have to specify the name of the parameter
but in my case how do i integrate it.
I hope you understandb my question.

How-to use captcha with ADF Faces 10g (10.1.3)

Hi All,
Could You Pls tell me how to use the captcha using 10g currently i am using the jdeveloper version of 10.1.3. I have found the link for using the *[captcha using 11g|http://www.oracle.com/technology/products/jdev/tips/fnimphius/captcha/captcha.html]* but some of the components here such as af:panelFormLayout and af:panelGroupLayout are not available in 10g.Are there are any alternative components Availablel for the 10g
regards
Yeshwant

Hi John ,
Thankx for the reply ..
i am getting the following compilation error *(Error: Attribute: halign is not a valid attribute name)* while doing that .
i have written the code as follows...
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelForm id="pfl1">
<f:facet name="footer"/>
<af:objectImage source="/captchaservlet" id="i1"
inlineStyle="width:251px; height:76.0px;"/>
<af:commandButton text="can't read image" id="cb2"
partialSubmit="false"/>
<af:panelLabelAndMessage label="Are U a robot?" id="plam1">
<af:panelGroup id="pgl1" layout="horizontal" halign="left">
<af:inputText id="it1" value="#{requestScope.bestGuess}"/>
<af:commandButton text="try" id="cb1"
actionListener="#{HandleCaptchaBean.verifyAnswer}"
partialSubmit="true" immediate="false"/>
</af:panelGroup>
<af:message id="m1" messageType="info" for="it1"/>
</af:panelLabelAndMessage>
</af:panelForm>
</af:form>
</af:document>
</f:view>
Thankx
Regards
Yeshwant

How to use iframes in oracle 10g

I have to load two jsp pages in a single html . I have done that thru iframes. But i have to dynamically load the second jsp page in the frame 2 , when the user clicks upon certain details in the frame 1 jsp page. I have wriiten the code of document.iframe in format trigger attribute. It doesn't work. Is there any other way to achieve this. I want to load the frame 2 jsp page dynamically , according to the input i get from frame 1 jsp page.

Hi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers

How to Use Profiler in ORACLE 10g

Hi all,
Anybody know how to use profiler in oracle 10g and also i couldn't able to install the enterprise manager console.is there any tools available for that.because i need to trace the execution of a stored procedure.waiting the reply.
Sathish

Hi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers

How to use CELLWRAPPER in 10g

Similar Messages

Maybe you are looking for