How to use clone to make a new instance

Hi:
I have a question here and need your help. If I have a new server ready and has no Oracle on it. I want to use clone to copy the production EBS to this new machine so I can use it as a test instance. How do I do it?
Thank you very much.

Hi;
Thank you but I don't have metalink account. Please just tell me if this is correct: I can use rapid clone to copy all to a test instance after the server is setting up, I don't have to install 11i, correct? Thank you.Yes you dont need to install anything, after clone you will have as same as your source system on target machine with same data-users etc.
For clone process you can check my blog
http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
Regard
Helios

Similar Messages

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

How to use old nano ipod on new computer

How to use old nano ipod with new computer

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Unable to make a new instance of a class?

Why can't I make a new instance of this object?
This doesn't work:
        static void generateConfirmationDialog(String s1, String s2,
            String s3)
            int optionConfirmation = JOptionPane.showConfirmDialog(null,
                "Confirm inputs: \n" +
                "\n1: " + s1 +
                "\n2: " + s2 +
                "\n3: " + s3,
                "Input Confirmation",
                JOptionPane.YES_NO_OPTION,
                JOptionPane.QUESTION_MESSAGE);
            if (optionConfirmation == JOptionPane.YES_OPTION)
                //A new instance of an object.
                //Class UserInterface
                //Inner Class FileChooser
                UserInterface.FileChooser fc = new
                    UserInterface.FileChooser.FileChooser();
            else if (optionConfirmation == JOptionPane.NO_OPTION)
                //Returns the user to the main menu, with inputs intact.
        }Here's that class:
    public class FileChooser extends JFrame
        FileChooser()
            JFileChooser filechooser = new JFileChooser();
            int returnValue = filechooser.showDialog(this, "Upload");
            //Not done yet, but it should be able to display it
    }But this works:
    public static void main(String args[])
        UserInterface menu = new UserInterface();
    }

1. Does class FileChooser need direct access to any nonstatic member variables or methods in the enclosing class (by your claim UserInterface)?
If not, then just make the nested class static by:public static class FileChooser extends JFrame
    // body
}note the static qualifier in the class definition. People frequently make inner classes where static nested classes would do equally as well or even better. Only if the nested class is "attached" to the instance is it necessary to make it non-static.
2. If so, does the generateConfirmationDialog() have to be static?
If not, simply remove the static qualifier from the method.
3. If so, you will have to pass the instance created in your main() method to the method and use it to instantiate the inner class. The syntax isUserInterface menu = new UserInterface();
FileChooser fc = menu.new FileChooser();4. Is there some reason you can't just use a filechooser from Swing?

How to use a repository in a new report

Hello,
I am starting to learn OBIEE and installed it in my home environment. I installed OBIEE, and used the RCU to install a repository in an Oracle database.
Then, I used the BI Administration tool to make a 'repository' which connects to my data (also in an Oracle database).
In the BI Administration tool I now have a physical layer, a business model and mapping, and a presentation layer. I saved this as a rpd file on my harddisk.
Then, in the Oracle BIEE Home I choose 'New report'. But I cannot find how I can choose my 'repository' with my data. I also tried to make a new datamodel, but here I am also not able to choose my repository.
How can I connect to my data in a report ? How does it work ?
Many thanks in advance,
Best Regards,
André.

You are totally getting Confused..
Have these understanding first.
You have DB installed.
You will create schema(Two users) in DB using RCU(Repository Creation Utility:Basically stores metadata required for OBIEE).
You will install OBIEE and use these schema there.
Above installation installs weblogic and then deploy BI files to weblogic to make them work.You should remember weblogic password.
Now when you open up Admin tool --Repository password should be 'Admin123' (A in capital) and username is weblogic and password should be weblogic password.
You will be able to open up the RPD in online mode.
I suggest you to first go through the Architecture of OBIEE and then start installation and start exercises.
mark correct or helpfull if it helps.Also let me know if you were able to open RPD and answers.
Regards,
Veeresh Rayan

How to use FC to make a sub-component for Flex

Most of the examples and tutorials I've seen so far assume you are creating the app itself in FC.
However, what I need to do is create a custom component that will be a "screen" in a large Flex app, like a page in a Wizard.
So if I was doing this without FC, I'd make a new mxml component in Flex, e.g. "WizardStep.mxml" and then in the main app,
<mx:ViewStack>
<h:WizardStep id="one" label="Step One" />
<h:WizardStep id="two" label="Step Two" />
</mx:ViewStack>
For example, assuming I have set up the namespace "h" to like "com.handycam.*"
How would I accomplish this scenario if "WizardStep" is what I have been building in FC?

Thanks for your answer!
Unfortunately it still doesn't work.
In FC I used the file menu item "publish as swf" ( or however it's called in English -
I'm also struggling with the -unwanted- German workspace terms). This generated
the deploy-to-web and run-local folders. In Flex3, I imported haupt.swf (=main.swf)
from the run-local folder.
When I use the imported file in the Image tag with the
loadForCompatibily attribute set to "true",the application compiles,
opens the IE, the remaining LinkBar buttons are not affected - they
show/run the Flash Pro .swfs and their controls,
but the attempt to access the .swf in question produces:
VerifyError: Error #1053: Illegal override of z in mx.core.UIComponent.
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/deferredNextFrame()[C:\autobuild\3.2.0\frameworks\projects\fra mework\src\mx\managers\SystemManager.as:319]
at mx.managers::SystemManager/preloader_initProgressHandler()[C:\autobuild\3.2.0\frameworks\ projects\framework\src\mx\managers\SystemManager.as:2945]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()[C:\autobuild\3.2.0\frameworks\projects\framework\ src\mx\preloaders\Preloader.as:398]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
The alternative approach:
<mx:SWFLoader x="3" y="35" width="970" height="425" loadForCompatibility="true" source="insets/haupt.swf"/>
produces:
VerifyError: Error #1014: Class flash.text.engine::TextLine could not be found.
at global$init()
If I code the SWFLoader tag as:
<mx:SWFLoader x="3" y="35" width="970" height="425" loadForCompatibility="true" source="
@Embed(source='insets/Haupt.swf')"/>
I get the same errors as I did for the Image tag approach.
Hope this helps.

How to use Dashcode to make HTML Widgets in iBooks Author?

I'm writing books on iBooks Author, and I got a problem:
I wanna add some HTML Widgets to my books, and I was told I should use Dashcode to make them. So I downloaded the Xcode, but I don't know how to open the Dashcode on my Mac. I really hope someone could give me some lessons, I would be very grateful!

Start here: iBooks Author: About HTML widget creation

How i use catalyst to make phone app

can any one know how i use flash catalyst to make cell phone application like black berry ???

Are you thinking of targeting the BlackBerry Playbook? You can use Flash Catalyst to prototype up your application for mobile, but the skins that it creates are not optimized for mobile nor are they usable in the Flex Hero mobile components. So Flash Catalyst's output will not be very useful by Flash Builder.
I would not recommend using Flash Catalyst as part of a production workflow for mobile at this time. You can still use it for prototyping you concept, but you not have any touch/gesture support in any of the components, making the interactions with the prototype a bit limited. Flash Catalyst only targets the desktop version of the Flex framework, so although you can compile the FXP in Flash Builder for a mobile device, you will be running the full desktop version of the Flex Framework and not the mobile-optimized version.
Hope this answers your question,
Chris

How to use Buffering to make image better

Rigth now I have a DFS maze program, that basically is like a grid maze with three buttons. Randomize (which, duh, randomizes the maze), Solve, and Statistics. When I click on the statistics button, another "wing" opens up on the left showing a text area. But when the text area is being built, what is actually going on in the background processing, is that thousands of maze iterations are running, and then the statistics is printing out. Of course when these iterations are running the maze screen goes blank, and there is one long blink. I would like to make it so that the last maze image stays, until all the statistics in the background is done, and then just the statistics is shown, and not the final maze iteration. So basically the maze image on the right will just be the maze image right before the statistics started running.

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use hdmi converter make notebook video become high-definition

Yesterday, i bought a notebook. When i connect with my TV and watch video. it is not definition. I ask for my friend. he told me that get a hdmi converter from hdgenius.com and use hdmi converter make signal become hdmi,Then it will become high-definition and watch perfect video. It is OK ?

Hey there SSaccio,
I'm having a little trouble determining exactly which system is yours. The site everymac.com has a list of all standard mac products and I don't see a 2.4 G5. So the info I'm going to give you is based on the 2.3 G5 duo.
This model ( http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_2.3dp.html )
Has the ATI Radeon 9600 with 128 MB of DDR SDRAM occupies an 8X AGP Pro slot. Dual monitoring is supported with this card up to 1920x1200. So you might be good to go with what you have already. If you know that you don't have this card, then let me know what you have and I might be able to suggest something else.
BTW
Graphics cards for Mac have a different card BIOS (or firmware, whatever it's called) than the PC versions. Therefore, you can't use a PC card in a Mac and viceversa, without reflashing it.
Nvidia, unlike ATI, does not sell their Mac cards as retail cards.
So if you don't have the ATI Radeon 9600 card then that's what you wanna get. It runs about $150-200
Cheers
-B

Recover Datafile Using Old Control File in New Instance

How to Recover Datafile in condition :
Old Instance was dropped but old controlfile still exist to new instance.

SigCle wrote:
If there is RMAN .bkp backup, I won't post a thread in here, and just do :
RMAN> STARTUP FORCE MOUNT;
RMAN> RESTORE DATABASE;
RMAN> RECOVER DATABASE;
RMAN> ALTER DATABASE OPEN;
The fact is there is no RMAN backup at all. Old database just dropped and uninstalled careless by my friend.
Fortunately there is still oradata folder(contain of control files and all datafiles).
But, I don't know to restore it manually and by system. I don't know file id of each datafile.
Helps / clues very appreciated.Well.If you have all control/online log/data files then there is no problem(also if you do not have pfile then create it manually according sample file).If your system is windows then create instance using oradim as
set ORACLE_SID=<SID>
oradim -new -sid <sid name> -intpwd <syspass> -pfile <pfile location>
sqlplus "/as sysdba"
startupif linux/unix then
export ORACLE_SID=<SID>
sqlplus "/as sysdba"
startup

How to use clone to make a new instance

Similar Messages

Maybe you are looking for