How to use coherence snapshot feature

Hi,
Refer - http://wiki.tangosol.com/display/COH33UG/Overview+for+Implementors
If long-term persistence of data is required, Coherence provides snapshot functionality to persist an image to disk. This is especially useful when the external data sources used to build the cache are extremely expensive. By using the snapshot, the cache can be rebuilt from an image file (rather than reloading from a very slow external datasource).
I want to take snapshot of my cache and persits in file system , and I need a feature to rebuilt the cache from the image.
Can someone provide me a details documents on cache snapshot.
Regards

I raised this with Oracle support and was told that they are planning to remove this from the documentation as this feature is not recommended to implement.
So I guess we will need to do something ourselves.
What I'm interested in is to be able to dump a node's data to disc before a shutdown so that we can do a full shutdown of the cluster and start it backup, load back in the snapshot dump and we are back to where we were. I was thinking this action could be triggered just before a release that requires a shutdown, perhaps via the invocation service.
Edited by: JTea on Jun 11, 2010 2:20 PM
Edited by: JTea on Jun 11, 2010 2:23 PM

Similar Messages

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

There is no current panorama feature. When iOS 6 is released (Sept. 19) we will find out.

Where can I find out how to use the Journals feature in iPhoto for iPhone

I am new to Apple Support Communities. Not sure if this is the place that will help me work with Journals. Is there a manual or video which helps with teaching the features of the Journals application and how to use them? I am stuck knowing how to move around the images and changing the page set-up, among other perplexing features.

You need the iPhoto for iOS forum is here
https://discussions.apple.com/community/app_store/iphoto_for_ios
Regards
TD

How to use the keystroke feature of applescript?

I am trying to use the keystroke feature of Applescript.
On page 200 of "Mac OSX Panther edition The Missing Manual" shows the following example (to select all of a document):
keystroke "a" using (command down)
I tried to use this with keystroke "o" and got the message that "using" can't be used this way. Where can I find a few examples of how to use this feature in Applescript? I particularly want to use keystrokes to copy rulers in Appleworks. The keystrokes to do this are "shift-command-v".
Thanks for comments.

While I agree with Hiroto as to how to implement 'AppleWorks 6's 'Format, Rules, Copy Ruler' ('Command <shift> C) sub-menu item selection, below is an example of performing the same action using 'keystroke'.
tell application "AppleWorks 6" to activate
tell application "System Events" to keystroke "c" using command down & shift down
Below is an example of performing 'AppleWorks 6's 'Format, Rules, Apply Ruler' ('Command <shift> V) sub-menu item selection using 'keystroke'.
tell application "AppleWorks 6" to activate
tell application "System Events" to keystroke "v" using command down & shift down
Mac OS X (10.4.4)

Where do I find information on how to use all the features of iPhoto on the iMac?

I was told that iphoto would be easy to use on IMac but I am not finding that true. Is there a guide to how to use Iphoto? Transferring photos from my external drive to iphoto is not working as I would expect. It imports them to a new "last import" and not to the folder I want. I am frustrated and can't find information that is helpful. help window only gives me connections I'm not looking for. I'm not seeming to ask the right questions. Can't even find the category I'm looking for. Is there a guide somewhere that I don't know about?

There's also this popular book: Amazon.com: iPhoto: The Missing Manual: 2014 release, covers iPhoto 9.5 for Mac and 2.0 for iOS (Missing Manuals) (9781491947319): David Pogue, Lesa Snider: Books
OT

How can use all vcenter feature such as HA and drs without shared storage

Hi
i have 2 esxi host dl 380g8
but i don't have any shared storage or san now i want use vcenter feature like ha and drs now for use this features do i have to run VSAN?
i readed for for use vsan we have to buy ATLEAST ONE ssd disk is this trure?
ssd disk is necessary?
atleast one ssd disk for each host ?
can use from all of vcenter feature with VSAN ?
please some help me

Hi,
For VSAN you need at LEAST 3 hosts (4 recommended).
Each host must have 1 SSD for read cache/write buffer.
Do you have any storage at all? How about running a NAS such as "OpenFiler" or "FreeNAS". That way you can present shared storage via that way. (I'd use this in Lab only). These NAS O/S's also work as virtual machines so you can turn any disk into shared storage.

How to use Acrobat sdk features in java application?

Hi
In my project i have an requirement to make static pdf in to dynamic form , So how can i make static PDF to dynamic one as my project platform is purely in java . How can i make use Acrobat SDK InterAppCommunicationSupport/ samples in my java code ?
Thanks & Regards,
Prashant P M.

Hi Leonard,
Thanks for your kind reply , I am attaching a sample SchollForm static PDF with this post, where it consist of student details like Name ,lastName ,section etc.
I like to convert this static PDF in to dynamic PDF means above field should be fillable ,So Using Acrobat SDK is it possible to achieve this above stuff.
If yes then Please can you give a brief idea how to do this one using Acrobat SDK with java? .
Thanks in Advance.
Prashant P M.

How to use NI CAN feature for extracting DBC information without a CAN Interface?

Hi,
I'm looking for some tricks in order to extract DBC Information using the NI CAN without a CAN interface...
Basically I have some DBC files and I would to analyze them to get hierarchy Messages and Channels (and their related information, offset, scale, etc.).
http://www.ni.com/white-paper/4294/en/
The function CAN Get Names is usefull and allow me depending on the mode to get a list of the Channels and Messages described in the DBC file. However, I'm encountering one major issue and none of the least, I cannot use the function the CAN Get Property... As it required a connector based on Task that I cannot provide since I dont have any real and physical CAN interface, for now. Therefore I cannot have any information about the channels neither about the messages...
Does anybody can give me a hand to fix that matter?
Solved!
Go to Solution.

Nelval wrote:
It seems that no matter the virtual port I am using, it does not work. Could you have a look at my sample.vi, I know it's poorly wired, especially since I'm more in .NET things than NI from my occupation ^^'. I also provided a dummy DBC file to simulate a very basic input.
And by the way is there any way then to get the Byte Array / Bit Array corresponding to a certain message (and how to set the signal values required to get the message)?
Your code isn't that bad, relativly easy to follow. In any case the problem had nothing to do with the CAN port being used. If you would probe the error wires around you would see that coming out of the CAN Init Start stated that the channel name didn't exist. Looking at how you had it wired you took the messages (or frames) and put them into the channels terminal, when I assume you wanted the channels. Then looking at your tree you were again trying to get the ID of a channel, but giving it the message name. I also added reading the Start Bit, Number of Bits, and Byte Order for all the channels read.
If you were to do this with XNET there would be completelly different functions, but the same operations can be done.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
DBC Extraction Hooovahh Edit.vi ‏29 KB

How to use the Answer feature in Forums?

Workspace forums offer a facility to show All Topic's or those Topics
* Open Questions
* Possibly Answered Questions
* Fully Answers Questions
Does this functionality apply to Topics as implied by its location on the screen, and if so how does a Topic get marked answered?

There is no current panorama feature. When iOS 6 is released (Sept. 19) we will find out.

How to use the transparent feature in Paint?

How do I use the Transparent? I thought it was to make a background disappear, like a dark background you don't want.
How does one "select" the background and make it transparent?
Win 8 and Paint.
Thanks.

Hi SHarenep,
When selecting parts of an image, you can decide if you want the background color to be included in the selection or not. Simply check or uncheck the
"Transparent selection" option. If you want the background included, uncheck the option and vice-versa.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1893 I just bought a MAC and can't figure out how to use the scan feature on my RX580 HP printer. Can anyone tell me where to find this? This used to be an option that was obvious under programs with my Dell. Please someone help!

I need some help! I was able to download my HP printer software on to my Macbook Pro, but cannot find the Scan feature on the computer to be able to scan a document. If someone could LMK what I need to do, or where I need to look to find this I would appreciate it!

That would be a function of the driver that came with the printer. Make sure you have the latest driver appropriate to your system, either from HP or:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

How to use standard text feature SO10 , dynamic text ?

hi i have to pass an email containing some information, information contains employee name and number , that I have to place at runtime in the message which is created in the SO10. How to do this ?
thanks,

Hi,
Please go through the links,
Re: Sending an Email
Sending Email. Urgent
Regards,
Azaz.

How to use coherence-web with a struts form bean

We are trying to switch to Glassfish 3.1 but when we switch the persistence-type from "replicated" to "coherence-web" our struts applications start failing. The first time we try the application the page loads. But all calls from then on end in error. The form bean is called FbCustomer. Any help is greatly appreciated!! Here is the error....
WARNING: StandardWrapperValve[action]: PWC1406: Servlet.service() for servlet action threw exception(Wrapped) java.io.IOException: readObject failed: java.lang.ClassNotFoundException: rav.einvoice.web.forms.FbCustomer
    at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:270)
    at java.io.ObjectInputStream.resolveClass(ObjectInputStream.java:623)
    at com.tangosol.io.ResolvingObjectInputStream.resolveClass(ResolvingObjectInputStream.java:66)
    at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1610)
    at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1515)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1769)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1348)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:370)
    at com.tangosol.util.ExternalizableHelper.readSerializable(ExternalizableHelper.java:2217)
    at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2348)
    at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2746)
    at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:262)
    at com.tangosol.coherence.servlet.OptimizedHolder.deserializeValue(OptimizedHolder.java:233)
    at com.tangosol.coherence.servlet.OptimizedHolder.getValue(OptimizedHolder.java:64)
    at com.tangosol.coherence.servlet.SplittableHolder.getValue(SplittableHolder.java:56)
    at com.tangosol.coherence.servlet.AbstractHttpSessionModel.getAttribute(AbstractHttpSessionModel.java:130)
    at com.tangosol.coherence.servlet.api23.HttpSessionImpl.getAttribute(HttpSessionImpl.java:81)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSession.getAttribute(CoherenceWebSession.java:461)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSessionFacade.getAttribute(CoherenceWebSessionFacade.java:87)
    at org.apache.struts.util.RequestUtils.createActionForm(RequestUtils.java:777)
    at org.apache.struts.action.RequestProcessor.processActionForm(RequestProcessor.java:364)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:253)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:668)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:770)
    at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1554)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
    at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:331)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
    at com.sun.enterprise.v3.services.impl.ContainerMapper$AdapterCallable.call(ContainerMapper.java:317)
    at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:864)
    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:761)
    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1050)
    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:231)
    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
    at java.lang.Thread.run(Thread.java:724)ClassLoader: java.net.URLClassLoader@695f18fe
    at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:266)
    at com.tangosol.coherence.servlet.OptimizedHolder.deserializeValue(OptimizedHolder.java:233)
    at com.tangosol.coherence.servlet.OptimizedHolder.getValue(OptimizedHolder.java:64)
    at com.tangosol.coherence.servlet.SplittableHolder.getValue(SplittableHolder.java:56)
    at com.tangosol.coherence.servlet.AbstractHttpSessionModel.getAttribute(AbstractHttpSessionModel.java:130)
    at com.tangosol.coherence.servlet.api23.HttpSessionImpl.getAttribute(HttpSessionImpl.java:81)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSession.getAttribute(CoherenceWebSession.java:461)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSessionFacade.getAttribute(CoherenceWebSessionFacade.java:87)
    at org.apache.struts.util.RequestUtils.createActionForm(RequestUtils.java:777)
    at org.apache.struts.action.RequestProcessor.processActionForm(RequestProcessor.java:364)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:253)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:668)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:770)
    at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1554)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
    at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:331)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
    at com.sun.enterprise.v3.services.impl.ContainerMapper$AdapterCallable.call(ContainerMapper.java:317)
    at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:864)
    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:761)
    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1050)
    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:231)
    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
    at java.lang.Thread.run(Thread.java:724)Caused by: java.io.IOException: readObject failed: java.lang.ClassNotFoundException: rav.einvoice.web.forms.FbCustomer
    at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:270)
    at java.io.ObjectInputStream.resolveClass(ObjectInputStream.java:623)
    at com.tangosol.io.ResolvingObjectInputStream.resolveClass(ResolvingObjectInputStream.java:66)
    at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1610)
    at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1515)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1769)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1348)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:370)
    at com.tangosol.util.ExternalizableHelper.readSerializable(ExternalizableHelper.java:2217)
    at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2348)
    at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2746)
    at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:262)
    at com.tangosol.coherence.servlet.OptimizedHolder.deserializeValue(OptimizedHolder.java:233)
    at com.tangosol.coherence.servlet.OptimizedHolder.getValue(OptimizedHolder.java:64)
    at com.tangosol.coherence.servlet.SplittableHolder.getValue(SplittableHolder.java:56)
    at com.tangosol.coherence.servlet.AbstractHttpSessionModel.getAttribute(AbstractHttpSessionModel.java:130)
    at com.tangosol.coherence.servlet.api23.HttpSessionImpl.getAttribute(HttpSessionImpl.java:81)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSession.getAttribute(CoherenceWebSession.java:461)
    at com.tangosol.coherence.servlet.glassfish31.CoherenceWebSessionFacade.getAttribute(CoherenceWebSessionFacade.java:87)
    at org.apache.struts.util.RequestUtils.createActionForm(RequestUtils.java:777)
    at org.apache.struts.action.RequestProcessor.processActionForm(RequestProcessor.java:364)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:253)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:668)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:770)
    at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1554)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
    at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:331)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
    at com.sun.enterprise.v3.services.impl.ContainerMapper$AdapterCallable.call(ContainerMapper.java:317)
    at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:864)
    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:761)
    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1050)
    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:231)
    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
    at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
    at java.lang.Thread.run(Thread.java:724)ClassLoader: java.net.URLClassLoader@695f18fe
    at com.tangosol.util.ExternalizableHelper.readSerializable(ExternalizableHelper.java:2225)
    at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2348)
    at com.tangosol.util.ExternalizableHelper.deserializeInternal(ExternalizableHelper.java:2746)
    at com.tangosol.util.ExternalizableHelper.fromBinary(ExternalizableHelper.java:262)    ... 38 more

Could you share with is the entire stacktrace?
It seems that your domain classes are not being founded by the classloader, and this could be a consequence of a lot of things, but in general, it is a classloader issue. Your classloader is broken by some reason. Check if dependencies are well solved, and check if there are some NoClassDefFoundErrors in the stacktrace. Sometimes when the classpath is wrong, the entire classloader brokes generating strange behaviors like this.
Also review the steps necessary to deploy Coherence*Web on GlassFish: http://docs.oracle.com/middleware/1212/coherence/COHCW/glassfish.htm#COHCW357
Remember for example that, different from WebLogic 12.1.2, you need to deploy coherence.jar and coherence-web.jar at your package deployment.
Cheers,
Ricardo Ferreira

Where Can I Go To Find Out How To Use New iOS 4 Features?

I have just updated my ipod touch to ios 4. I have the wallpaper feature so I am presuming the rest of the features should work. How to I find out how to use the other features such as App folder options, Multitasking etc as I can't seem to be able to ??
Thanks in advance to anyone who may be able to help

Start Here. Search Google.
You must have a 3G or later model to use multi-tasking and some other features.
Message was edited by: Kappy

How to use coherence snapshot feature

Similar Messages

Maybe you are looking for