How to use command line

Hi All
I want to create a Adobe Reader that when it startup will auto open a file.
so I add this file to SYSDrive and modify startup command....I add a command line like @SYSDRIVE\test.pdf ,\Files\@SYSDRIVE\test.pdf or c:\test.pdf....
but all testing will show error message~~
about my purpose How ot set the "Command line" parameter ??
thanks!!
wyldkao

Are you including the file with your virtualized app?

Similar Messages

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

I want to use command line to execute an oracle report?

Dear all,
I am using Oracle Application. Does anyone know how to use command line to execute an oracle report?
I mean execute command from client to server.
Please advice,
Amy
Edited by: amychan60 on Dec 13, 2009 11:33 PM

Hi,
Using Oracle Application Server the standard way for a client to request a report is via a HTTP request. This doesn't really lend itself to use directly on a command line on a client however you could use the following:
explorer "http://your_server/reports/rwservlet?report=report_name.rdf&userid=userid/password@db_sid&paramform=no&destype=FILE&desname=c:\temp\filename.pdf&desformat=pdf"
This will load explorer and submit that URL for you and request the report. You can change the parameters depending on the report output you require.
If you need something that is silent (ie doesn't load in explorer) you'll need to investigate other ways of submitting that URL request, perhaps using Java. You could also use SRW.run_report (Event Driven Publishing) to submit the request using SQL.
Cheers,
Toby.

How to duplicate a target and add resources in xcode using command line?

I am trying to use command line tools to create, add resources, build, archive and export to ipa in xcode. I could do the Build, Archive and Exporting to IPA through the command line tools(xcodebuild). But I also wanted to duplicate the target in the same project,add a new Info.plist to the duplicated target resource through command line itself. How to do it? I could not find any valuable answers by Googling. I could not find any proper documentation also in Apple Sites.
Is there any tools that can be used to perform these? I don't want to use the UI. Please, help me out.

The Mac App Store is not appropriate for command line tools. You can use any language you want.

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How to Create Test Sequence Document in HTML using command line

How to Create Test Sequence Document in HTML using command line
I have lot of sequences and I want to create Test Sequence Documentation in HTML format using Command Line automatically, is there a way to automate this task using .bat file or using C# .Net

If you aren't able to figure out how to call a C++ DLL in .net then there may be another option. Unfortunately I don't know how to do this off the top of my head and I don't have an example.
The other option would be to change docgen.seq a little bit to the dialog doesn't display and you just hardcode the options. Then you can use a command line to call testexec.exe: http://zone.ni.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/startup_opt/
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to call a ODI Job using Command line?

Hello All,
Please help me on this..
How to call an ODI Job using Command line?
Thanks
Ravikiran

Generate a scenario of your package. Then go to <ODI_HOME>/oracledi/agent/bin in command prompt and invoke startscen command .
startcmd.sh OdiStartScen -SCEN_NAME=scn_load_data -SCEN_VERSION=001 -CONTEXT=GLOBAL -AGENT_CODE=odiSchedAgent001
Bhabani
http://dwteam.in

How to print a specific page from a given PDF document, using command line, please?

Hello,
I need your advise, please. My customer requires to print a specfic page from a pdf document they receive, using command line or 3rd party solution.
Anything you can advise, please? I have seen AcroRD32.exe options, but can only print the whole document.
Kind Regards

Not sure if there are any examples. The Acrobat SDK is a must, but it is best treated as documentation to study rather than examples to copy. The examples only illustrate a tiny fraction of the capabiliies.
(One other note: the solution must involve the client owning Acrobat; Acrobat is not for server use).

How to open url in acrobat reader using command line

Hi,
I need to open file from url using command line, but I'm still getting some error (wrong filename).
I've tried for example this command:
AcroRd32.exe http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Can anyone help me and tell me what's wrong?

You can't use a URL as parameter for AcroRd32.exe.

How to purge data cache table using command line

Hi:
Is there a way to purge the data cache table using command line?
thanks!

Thanks, Mike.
I'm thinking about the ldconsole provided with ALDSP.
The ldconsole has a link for purging the cache. Is there anything I can leverage from there? Is it a JMX component that I can call?

How to test ODI Agent - using command line / scripts ?

We can test ODI scheduler Agent from Topology manager, is there a way to test it using command line options / scripts ?

Go to <ODI_HOME>/oracledi/bin in command prompt and invoke startscen command with teh below parameters.
Edited by: Guru Sankar on Feb 28, 2011 4:19 PM

How to create user in workspace using command line with Internal APEX

Hi fellows,
I'm newbie with APEX and my i try doing something different. I need to build one application in Internal for create users in another workspaces. So, for do this, need use command line and PL/SQL code.
I know exists a CREATE_USER procedure. But, this procedure just create a user in Internal, not in workspace, like i want.
Its possible? Someone can help me?
Example of create_user procedure:
BEGIN
APEX_UTIL.CREATE_USER(
     p_user_name => 'NEWUSER2',
     p_first_name => 'FRANK',
     p_last_name => 'SMITH',
     p_description => 'Description...',
     p_email_address => '[email protected]',
     p_web_password => 'password',
     p_developer_privs => 'ADMIN:CREATE:DATA_LOADER:EDIT:HELP:MONITOR:SQL',
     p_default_schema => 'MY_SCHEMA',
     p_allow_access_to_schemas => 'MY_SCHEMA2',
     p_change_password_on_first_use => 'N',
     p_attribute_01 => '123 456 7890');
END;
Thank you.

Did you try it like this?
DECLARE
   l_workspace_id      number;
BEGIN
    l_workspace_id := apex_util.find_security_group_id (p_workspace => 'MY_WORKSPACE_NAME');
    apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
APEX_UTIL.CREATE_USER(
     p_user_name => 'NEWUSER2',
     p_first_name => 'FRANK',
     p_last_name => 'SMITH',
     p_description => 'Description...',
     p_email_address => '[email protected]',
     p_web_password => 'password',
     p_developer_privs => 'ADMIN:CREATE:DATA_LOADER:EDIT:HELP:MONITOR:SQL',
     p_default_schema => 'MY_SCHEMA',
     p_allow_access_to_schemas => 'MY_SCHEMA2',
     p_change_password_on_first_use => 'N',
     p_attribute_01 => '123 456 7890');
END;

Read in file name + path using command line arguments

Hi guys,
I am trying to use command line arguments to read in the name of two files. The code below works as long as the files are on the class path.
public class cmdLineArguments {
     public static void main(String[] args) {
          String xmlFile1 = args[0];
                String xmlFile2 = args[1];
          System.out.println ("\nXmlFile1: " + args[0] + "\nXmlFile2: " + args[1]);
}I would like to be able to read files that are not on the class path as well by entering their full path along with their names.
In other words, It works if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs file1.xml file2.xmlbut not if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlWould anyone please explain how I can edit the code to make it work? I guess I could take them both as a String, modify them manually (add a \ to it etc) but is there an easier way to do it? Even a reference to a tutorial, article etc about this would be very much appreciated.
Also, any idea why a code would compile and run fine in Eclipse but would create an error from command line?
Thanks a lot.

You need to learn about cmd.exe which is used to process the command line. The arguments passed to any program is the command line split at white space so your command line arguments of
c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlis turned into an array of
"c:\Documents", "and", "Settings\user\desktop\file1.xml", "c:\Documents", "and", "Settings\user\desktop\file2.xml"In other words instead of 2 arguments you actually have 6.
To get round this the file names need to be quoted
java cmdLineArgs "c:\Documents and Settings\user\desktop\file1.xml" "c:\Documents and Settings\user\desktop\file2.xml"

How to give command line arguments

does anyone help me out in how to give command line arguments after run my program
m using netbeans6.0.1

If you want your program to take console input while it's running (as opposed to command line arguments, which are passed once, when you start your program), you can wrap a BufferdInputStream or a Scanner around System.in.
[http://java.sun.com/docs/books/tutorial/essential/io/index.html]

OIM11g R1: Exporting Objects using command line utility

Hi All,
Is it possible to export/import OIM objects using command line utility (As per my requirement, I am not suppose to use the OIM Deployment Manager from UI)?
I am looking for something like oimtool if provided OOTB by oracle.
Regards,
Sunny
Edited by: 968494 on Nov 2, 2012 3:35 PM

Sunny,
What kind of objects do you want to export/import. I am asking because we have such command tool with Weblogic and OIM. Check this out:
1-http://itnaf.org/2012/09/23/how-to-import-and-export-metadata-from-oim-mds/
2-ttp://docs.oracle.com/cd/E14571_01/doc.1111/e14309/utils.htm
I hope this helps,
Thiago Leoncio.

How to use command line

Similar Messages

Maybe you are looking for