How to use CONCATENATE statement?

Hi all,
the below statement is giving an error when i try to place quotes on either side of the field. Could you tell me what is wrong with this statment.
concatenate ''' p_lv_kappl ''' into lv_kappl.
Rgds,
YJR

Hi,
Try this sample code it is working with output 'JUDY'
DATA: c_a(1) TYPE C VALUE '''',
 (here specify two single quotes within single quotes)
 c_x(4) TYPE C VALUE 'JUDY',
 c_z(6) TYPE C.
CONCATENATE c_a c_x c_a into c_z.
write: / c_z.
This solves ur problem.
If u want u display as "JUDY" the give a double quotes with in single quotes.
DATA: c_a(1) TYPE C VALUE '"',
 c_x(4) TYPE C VALUE 'JUDY',
 c_z(6) TYPE C.
CONCATENATE c_a c_x c_a into c_z.
write: / c_z.
This is what u want or?
If this solves ur problem, kindly reward points and close the thread.

Similar Messages

How to use perform statements in sap scripts

how to use perform statements in sap scripts . and pls send me one progam for this
thnaks
raja

Hi Raja,
PERFORM key work is used to include subroutine in sapscript form...
But the processing is lttle bit different form the one we use in ABAP.
Here the paramters passed to form is stored in internal table of name-value table. there are two table one for inbound parameter and other for outbound parameters.
Check out the example below to see how this is used..
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Hope this is clear to understand...
Enjoy SAP.
Pankaj Singh.

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use CASE statement in WDA

Hi All,
Can any one Please expain me ' How to use CASE statement in Web dynpro ABAP? '
Please give me an example also.
Thanks in Advance !

Hi,
The usage of case statement in webdynpro is same as used in general ABAP.
Data: l_id type string.
l_id = wdevent->get_string( 'ID' ).
case l_id.
when 'BTN1'.
when 'BTN2'.
when 'OTHERS'.
endcase.
Regards,
Radhika.

How to use collect statement for below

data : begin of itab,
         n(3) type c,
      n1 type n,
      k(5) type c,
      end of itab.
select n n1 from into itab table /zteest.
*internal table has
n      n1    k
gar    100 uji
hae    90   iou
gar    90   uji
hae    87   iou
I want
gar 190
hae 177
How to use collect statement as n1 is n ..?
let me know..
Thanks

try this..
DATA : BEGIN OF itab OCCURS 0,
n(3) TYPE c,
n1(3) TYPE p DECIMALS 2,
k(5) TYPE c,
END OF itab.
itab-n = 'gar'.
itab-n1 = 100.
itab-k = 'uji'.
COLLECT itab .CLEAR itab.
itab-n = 'hae'.
itab-n1 = 90.
itab-k = 'iou'.
COLLECT itab .CLEAR itab.
itab-n = 'gar'.
itab-n1 = 90.
itab-k = 'uji'.
COLLECT itab .CLEAR itab.
itab-n = 'hae'.
itab-n1 = 87.
itab-k = 'iou'.
COLLECT itab .CLEAR itab.

How to use multiple statements inside the "THEN" block of CASE statement?

Below is the code:
SET @strTempString = case @strKeyMode
WHEN 'AUTO/CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'COMMERCIAL'
THEN @strRefID + '|' + @strRetID
WHEN 'ISNAP'
THEN set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
'' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType
WHEN 'ASNAP'
THEN @strRefID + '|' + @strRetID
WHEN 'MOAT'
THEN @strRefID + '|' + @strRetID
else '0'
end
The first 3 conditions are understandable. How to use multiple statements in 4th case?
Here I first want to set the value as:
set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
and then return the string '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType to @strTempString.
Please help me remove the syntax errors.
Thanks in advance.

Try below SQL
DECLARE @strKeyMode varchar(20) = 'ISNAP'
DECLARE @SQL VARCHAR(MAX)
DECLARE @strRefID int=1
DECLARE @strRetID INT=2
--FIRST WAY
IF @strKeyMode ='AUTO/CYCLE'
SELECT CAST(@strRefID as varchar(10))
ELSE IF @strKeyMode ='CYCLE'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
ELSE IF @strKeyMode='ISNAP'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE
SELECT @SQL='ABC'
print @sql
----SECOND WAY
SELECT @SQL = CASE @strKeyMode
WHEN 'AUTO/CYCLE' THEN CAST(@strRefID as varchar(10))
WHEN 'CYCLE' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
WHEN 'ISNAP' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE 'No Record'
END
PRINT (@SQL)
--Prashanth

How to use " PERFORM ", STATEMENT WITH OFFSET

hI,
How we use Perform statement with offset, like
Example:   " PERFORM READ_SEGRELEASE USING INT_EDIDC+11."
My requirement is to use Perform with Automatic length declaration.
Automatic length declaration in PERFORM statement
Kindly Explain and Provide some Example programm written in this situation.
Thanks,
P.N.Kumar

Hiere is an example of what you probably require:
DATA:
lv_offset        TYPE syoffi,
lv_length        TYPE flength,
lv_field          TYPE string.
lv_field = 'This is my value: hello world'.
lv_length = 5.
lv_offset = 18.
PERFORM read_segrelease USING lv_field
                                                        lv_length
                                                        lv_offset.
*&      Form READ_SEGRELEASE
*       text
*      -->P_LV_FIELD text
*      -->P_LV_LENGTH text
*      -->P_LV_OFFSET text
FORM read_segrelease USING    p_lv_field         TYPE string
                                                     p_lv_length      TYPE flength
                                                     p_lv_offset      TYPE syoffi.
DATA:
lv_result    TYPE string.
lv_result = p_lv_field+p_lv_offset(p_lv_length).
WRITE: / lv_result.
ENDFORM.                    " READ_SEGRELEASE

How to use collect statement

hi everybody,
how to use collect statement to get the total amount paid to different vendor payments
data : begin of wa occurs 0,
 bukrs type bsak-bukrs,
 lifnr type bsak-lifnr,
 land1 type lfa1-land1,
 name1 like lfa1-name1,
 dmbtr like bsak-dmbtr,
 count type i value 0,
 tot_vend type i,
 vend type i.
data :end of wa.
data : itab like table of wa.
select distinct bukrs lifnr waers from bsak into
corresponding fields of wa
 where bukrs in s_bukrs
 and lifnr in s_lifnr
 and bschl in s_bschl.
i want the total amount paid according to vendor i am using this way but i am not getting
loop at itab into wa.
wa-dmbtr = bsak-dmbtr.
collect wa-dmbtr into itab.
modify itab from wa transporting dmbtr.
i am unalbe to get it
can anybody help me regarding this if possible with example.
thanks in advance,
regards,
venu.

Hi Venu,
types: BEGIN OF ty,
 NAME(20),
 SALES TYPE I,
 END OF ty.
data : itab type standard table of ty,
itab1 type standard table of ty,
wa type ty,
wa1 type ty.
wa-NAME = 'Duck'. wa-SALES = 10.
append wa to itab.
wa-NAME = 'Tiger'. wa-SALES = 20.
append wa to itab.
wa-NAME = 'Duck'. wa-SALES = 30.
append wa to itab.
loop at itab into wa.
wa1 = wa.
collect wa1 into itab1.
endloop.
loop at itab1 into wa1.
write : / wa1-name , wa1-sales.
endloop.
COLLECT is used to create unique or compressed datsets. The key fields are the default key fields of the internal table itab .
If you use only COLLECT to fill an internal table, COLLECT makes sure that the internal table does not contain two entries with the same default key fields.
If, besides its default key fields, the internal table contains number fields (see also ABAP/4 number types ), the contents of these number fields are added together if the internal table already contains an entry with the same key fields.
If the default key of an internal table processed with COLLECT is blank, all the values are added up in the first table line.
In the program you mentioned yesterday,I am not able to get the logic since many lines are commented.

How to use collect statement properly

In PBID table , i will get 4 rows for a material . I will get the corresponding values of bdzei from the same table . Now i will pass this bdzei into pbhi table. then i will get some 200 rows of data. I have to sum up the field plnmg , by grouping the laeda field of pbhi. In short, i need to know the sum of pbhi-plnmg for a particular pbhi-laeda . I know a way to do it. But i want to know how to use the COLLECT statement for this purpose. My output should contain oly 1 line for 1 material ..
PBID table
Matnr BDZEI
p4471 457
 1002
 2309
 2493
PBHI table
BDZEI LAEDA PLNMG
1002 06.08.2004 0.000
1002 06.08.2004 83.000
457 07.08.2004 12.000
457 07.08.2004 24.000
Reqd O/p
MATNR LAEDA PLNMG
p4471 06.08.2004 83
p4471 07.08.2004 36
Hope u understood my situation .please help me out ...
Thanking you in advance ..
Shankar

REPORT zppr_zpipr NO STANDARD PAGE HEADING LINE-SIZE 150 LINE-COUNT 63.
TABLES: pbid,
 pbhi,
 makt,
 mseg,
 mkpf.
DATA: BEGIN OF it_pbid OCCURS 0,
 matnr LIKE pbid-matnr, " Material
 status TYPE c LENGTH 4, " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
 bdzei LIKE pbid-bdzei,
 laeda LIKE pbhi-laeda,
end of it_pbid.
DATA: BEGIN OF it_pbim OCCURS 0,
 matnr LIKE pbid-matnr, " Material
 status TYPE c LENGTH 4, " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
 bdzei LIKE pbim-bdzei,
 laeda LIKE pbhi-laeda,
end of it_pbim.
DATA: BEGIN OF it_pbid_pbim OCCURS 0,
 matnr LIKE pbid-matnr, " Material
 laeda LIKE pbhi-laeda, " Reduction Date
 dbmng LIKE pbhi-dbmng, " Planned quantity in the data base
 plnmg LIKE pbhi-plnmg, " Planned quantity
 status TYPE c LENGTH 4, " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
 mblnr LIKE mseg-mblnr, " Material Doc Number
 pbfnr LIKE pbid-pbdnr, " Plan Number
 maktx LIKE makt-maktx, " Matl Desc
 aenam LIKE pbhi-aenam, " User Changed
 erfmg LIKE mseg-erfmg, " Qty Invoiced
 budat LIKE mkpf-budat, " Invoice date
 bdzei LIKE pbid-bdzei, " Independent requirements pointer
 werks LIKE pbid-werks, " plant
 pirrednqty TYPE i, " PIR Reduction Quantity = pbih-plnmg - pbih-dbmng
 diff TYPE i, " Difference
 slno TYPE i, " Sl No
END OF it_pbid_pbim.
DATA: BEGIN OF it_allrows OCCURS 0.
 INCLUDE STRUCTURE it_pbid_pbim.
DATA: END OF it_allrows.
*DATA: BEGIN OF it_final OCCURS 0.
 INCLUDE STRUCTURE it_pbid_pbim.
*DATA: END OF it_final.
DATA: BEGIN OF line,
 matnr LIKE pbid-matnr, " Material
 laeda LIKE pbhi-laeda, " Reduction Date
 plnmg LIKE pbhi-plnmg, " Planned quantity
 maktx LIKE makt-maktx, " Matl Desc
 dbmng LIKE pbhi-dbmng, " Planned quantity in the data base
 mblnr LIKE mseg-mblnr, " Material Doc Number
 pbfnr LIKE pbid-pbdnr, " Plan Number
 aenam LIKE pbhi-aenam, " User Changed
 erfmg LIKE mseg-erfmg, " Qty Invoiced
 budat LIKE mkpf-budat, " Invoice date
 bdzei LIKE pbid-bdzei, " Independent requirements pointer
 werks LIKE pbid-werks, " plant
 pirrednqty TYPE i, " PIR Reduction Quantity = pbih-plnmg - pbih-dbmng
 diff TYPE i, " Difference
 slno TYPE i, " Sl No
 status TYPE c LENGTH 4, " For distinguishing materials from pbid and pbim .. will contain space for PBID and 'PBIM' for PBIM
END OF line.
DATA Itfinal1 LIKE STANDARD TABLE
 OF LINE
 WITH DEFAULT KEY.
DATA ITfinal LIKE ITfinal1.
DATA: BEGIN OF it_dates OCCURS 0,
 date TYPE sy-datum,
END OF it_dates.
DATA: l_slno TYPE i.
DATA: l_zebra TYPE c.
SELECT-OPTIONS:
 s_werks FOR pbid-werks obligatory.
SELECT-OPTIONS:
 s_matnr FOR pbid-matnr.
SELECT-OPTIONS:
 s_pbdnr FOR pbid-pbdnr.
SELECT-OPTIONS:
 s_laeda FOR pbhi-laeda obligatory.
parameter:
 c_print type checkbox.
SELECT matnr bdzei FROM pbid INTO (it_pbid-matnr, it_pbid-bdzei) WHERE werks IN s_werks AND matnr IN s_matnr AND pbdnr IN s_pbdnr.
it_pbid-status = 'PBID'.
APPEND it_pbid.
move-corresponding it_pbid to it_pbid_pbim.
Append it_pbid_pbim.
ENDSELECT.
SELECT matnr bdzei FROM pbim INTO (it_pbim-matnr,it_pbim-bdzei) WHERE werks IN s_werks AND matnr IN s_matnr AND pbdnr IN s_pbdnr.
APPEND it_pbim.
Append it_pbid_pbim.
ENDSELECT.
*break-point.
START-OF-SELECTION.
LOOP AT s_laeda.
 it_dates-date = s_laeda-low.
 APPEND it_dates.
ENDLOOP.
DATA: l_startdate LIKE sy-datum.
IF s_laeda-high EQ space.
ELSE.
 l_startdate = s_laeda-low + 1.
 DO.
 IF l_startdate <= s_laeda-high.
 it_dates-date = l_startdate.
 APPEND it_dates.
 ELSE.
 it_dates-date = sy-datum.
 EXIT.
 ENDIF.
 l_startdate = l_startdate + 1.
 ENDDO.
ENDIF.
*break-point.
LOOP AT it_pbim.
 LOOP AT it_dates.
 it_pbim-laeda = it_dates-date.
 it_pbim-status = 'PBIM'.
 MODIFY it_pbim TRANSPORTING laeda status.
 MOVE-CORRESPONDING it_pbim TO it_pbid_pbim.
 APPEND it_pbid_pbim.
 ENDLOOP.
ENDLOOP.
break-point.
l_zebra = 'X'.
DATA: l_toterfmg LIKE mseg-erfmg.
DATA: l_erfmg LIKE mseg-erfmg.
data: l_totpir type i.
**************************************PBID*************************************
LOOP AT it_pbid.
 move-corresponding it_pbid to it_pbid_pbim.
 append it_pbid_pbim.
 SELECT SINGLE maktx FROM makt INTO (it_pbid_pbim-maktx) WHERE matnr = it_pbid-matnr.
 MODIFY table it_pbid_pbim TRANSPORTING maktx.
 SELECT aenam laeda FROM pbhi INTO (it_pbid_pbim-aenam,it_pbid_pbim-laeda) WHERE bdzei = it_pbid-bdzei AND aenam = 'Abbau-'.
 MODIFY TABLE it_pbid_pbim TRANSPORTING aenam laeda. " debug here
 select single sum( dbmng ) sum( plnmg ) FROM pbhi INTO (it_pbid_pbim-dbmng,it_pbid_pbim-plnmg) WHERE bdzei = it_pbid-bdzei AND aenam = 'Abbau-' and laeda = it_pbid_pbim-laeda..
 MODIFY TABLE it_pbid_pbim TRANSPORTING dbmng plnmg. " debug here
 endselect.
 it_pbid_pbim-pirrednqty = it_pbid_pbim-dbmng - it_pbid_pbim-plnmg.
 MODIFY table it_pbid_pbim TRANSPORTING pirrednqty.
 IF ( it_pbid_pbim-laeda IN s_laeda AND it_pbid_pbim-aenam EQ 'Abbau-' ).
 MOVE-CORRESPONDING it_pbid_pbim TO it_allrows.
 append it_allrows.
 ELSEIF NOT it_pbid_pbim-laeda IN s_laeda.
 delete it_pbid_pbim index sy-tabix. " debug here
 ENDIF.
 ENDSELECT.
ENDLOOP.
**************************************PBIM*************************************
LOOP AT it_pbim.
 move-corresponding it_pbim to it_pbid_pbim.
 append it_pbid_pbim.
 SELECT SINGLE maktx FROM makt INTO (it_pbid_pbim-maktx) WHERE matnr = it_pbim-matnr.
 MODIFY table it_pbid_pbim TRANSPORTING maktx.
 SELECT aenam laeda FROM pbhi INTO (it_pbid_pbim-aenam,it_pbid_pbim-laeda) WHERE bdzei = it_pbim-bdzei AND aenam = 'Abbau-'.
 MODIFY TABLE it_pbid_pbim TRANSPORTING aenam laeda. " debug here
 select single sum( dbmng ) sum( plnmg ) FROM pbhi INTO (it_pbid_pbim-dbmng,it_pbid_pbim-plnmg) WHERE bdzei = it_pbim-bdzei AND aenam = 'Abbau-' and laeda = it_pbid_pbim-laeda..
 MODIFY TABLE it_pbid_pbim TRANSPORTING dbmng plnmg. " debug here
 it_pbid_pbim-pirrednqty = it_pbid_pbim-dbmng - it_pbid_pbim-plnmg.
 MODIFY table it_pbid_pbim TRANSPORTING pirrednqty.
 IF ( it_pbid_pbim-laeda IN s_laeda AND it_pbid_pbim-aenam EQ 'Abbau-' ).
 MOVE-CORRESPONDING it_pbid_pbim TO it_allrows.
 append it_allrows.
 ELSEIF NOT it_pbid_pbim-laeda IN s_laeda.
 delete it_pbid_pbim index sy-tabix. " debug here
 ENDIF.
 ENDSELECT.
ENDLOOP.
sort it_allrows by matnr laeda status.
**********************************ALL ROWS************************
loop at it_allrows.
line-matnr = it_allrows-matnr.
line-laeda = it_allrows-laeda.
line-plnmg = it_allrows-plnmg.
line-dbmng = it_allrows-dbmng.
line-mblnr = it_allrows-mblnr.
line-pbfnr = it_allrows-pbfnr.
line-maktx = it_allrows-maktx.
line-aenam = it_allrows-aenam.
line-erfmg = it_allrows-erfmg.
line-budat = it_allrows-budat.
line-bdzei = it_allrows-bdzei.
line-werks = it_allrows-werks.
line-pirrednqty = it_allrows-pirrednqty.
line-diff = it_allrows-diff.
line-slno = it_allrows-slno.
line-status = it_allrows-status.
collect line into itfinal1.
endloop.
loop at itfinal1 into line.
collect line into itfinal.
 write: / line-matnr, line-plnmg, line-dbmng,line-laeda,line-status..
endloop.
skip 4.
loop at itfinal into line.
write: / line-matnr, line-plnmg, line-dbmng,line-laeda,line-status..
endloop.
break-point.

HOW TO USE PERFORM STATEMENT IN SMARTFORMS

Hi,
Can anyone tell me how to use call subroutine in smartform?
Thanks & Regards,
Gauarv.

Hi,
Hope this helps you..
You can use the PERFORM command to call an ABAP subroutine
(form) from
any program, subject to the normal ABAP runtime
authorization
checking. You can use such calls to subroutines for
carrying out
calculations, for obtaining data from the database that is
needed at
display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed
when a
document is formatted for display or printing.
Communication between a
subroutine that you call and the document is by way of
symbols whose
values are set in the subroutine.
The system does not execute the PERFORM command within
SAPscript
replace modules, such as TEXT_SYMBOL_REPLACE or
TEXT_INCLUDE_REPLACE.
The replace modules can only replace symbol values or
resolve include
texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of
the four
SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must
therefore be
character strings.
The ABAP subroutine called via the command line stated
above must be
defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING...
are now
stored in the internal table IN_TAB . Note that the system
passes the
values as character string to the subroutine, since the
field Feld
VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR
80). See the
example below on how to access the variables.
The internal table OUT_TAB contains names and values of the
CHANGING
parameters in the PERFORM statement. These parameters are
local text
symbols, that is, character fields. See the example below
on how to
return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in
the ABAP
program QCJPERFO is called. Then the simple barcode
contained there
('First page', 'Next page', 'Last page') is printed as
local variable
symbol.

HOW TO USE "WITH" STATEMENT IN MESSAGES

MESSAGE e001 WITH WERKS SY-REPID
TELL ME HOW TO USE "WITH" IN MESSAGES SEND SYANTAX AND EXAMPLE CODE

Messages e001(zz) with Var1 var2 var3.
For this statement to be valie, the variables var1 var2 var3 should be defined alrteady in the program.
and in se91, you should define a message class (Say ZZ ).
In that message class you can create a message with number (Say 001) with place holders (&).
001: & is a sampele message for & hgh & hjknkn
The & will get replaced by the variables var1 var2 var3 in the run time.
YOu can also create success messages if yo say:
Messages S001(zz) with Var1 var2 var3.
Information
Messages I001(zz) with Var1 var2 var3.
Warning:
Messages W001(zz) with Var1 var2 var3.
Abend:
Messages a001(zz) with Var1 var2 var3.
REFER sample programs : DEMO_MESSAGES
DEMO_MESSAGES_SIMPLE
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana

How to use prepared statement by Application Module on ADF?

Hello
i am using a prepared statement on the view side of my project,
this is my code, i'm not sure about using this code.
AppModuleGFTImpl am = (AppModuleGFTImpl) Configuration.createRootApplicationModule(amDef,config);
try {
ps =am.getDBTransaction().createPreparedStatement("Select * from XXXXXX where kullanici_id=? and sifre=?",0);
ps.setString(1, kullanici);
ps.setString(2, sifre);
rs = ps.executeQuery();
if (rs.next()) {
girebilir = true;
} else {
girebilir = false;
ps.close();
rs.close();
//am.getDBTransaction().closeTransaction(); ? I'm not Sure
//Configuration.releaseRootApplicationModule(am, true); ? I'm not Sure
Is it True? How we use this code on the project view side? Must we close Transaction, or release application Module.
thanks for interest.
sorry my english.

Hello, for the SP you can use something like this in your application module
private static final String BULKSTAMMENN =
    "begin IVA_OWNER.IVA_UI_ALGEMEEN_PCK.USM_SNELLE_INVOER_GUI( P_RLE_ID => :1, P_AANTAL => :2, P_OJR_JAAR => :3, P_RAS_ID => :4, P_TOELICHTING => :5, P_SUCCES => :6 ); end;";
public void bulkStamen ( int rasId, int telerId, int jaar, int aantal, String toelichting ) {
    CallableStatement bulkStamenSP = null;
    try {
      bulkStamenSP = getDBTransaction().createCallableStatement( BULKSTAMMENN, 0 );
      bulkStamenSP.setInt( 1, telerId );
      bulkStamenSP.setInt( 2, aantal );
      bulkStamenSP.setInt( 3, jaar );
      bulkStamenSP.setInt( 4, rasId );
      bulkStamenSP.setString( 5, toelichting );
      bulkStamenSP.registerOutParameter( 6, Types.VARCHAR );
      bulkStamenSP.executeUpdate();
    } catch ( Exception e ) {
      log.warning( "Aanroep naar " + BULKSTAMMENN + " gefaald, " + e.getMessage() );
    } finally {
      if ( bulkStamenSP != null ) {
        try {
          bulkStamenSP.close();
        } catch ( Exception e ) {
          log.warning( e.getMessage() );
    log.info( "Stammen bulk uitgevoerd voor " + rasId + " " + telerId + " " + jaar + " " + aantal + " " +
              toelichting );
}You can then drag this method onto your page or right into your task flow if your using JDev 11.
Also you can access it from a backing bean although the methods above are preferred
-Anton

How to use prepared statement - For Everyone Help

public String count()
int count = 0;
String fetchsize = "";
try
Connection conn = getOADBTransaction().getJdbcConnection();
Statement statement = conn.createStatement();
String Query = "select count(*) count from fnd_lookups where lookup_type like 'SAPE_BILL_TO_SHIP_TO_UPDATE'";
ResultSet resultset = statement.executeQuery(Query);
while (resultset.next())
count = (int)resultset.getInt("count");
fetchsize = ""+count;
catch(Exception e)
return fetchsize;
}

Hi,
we can use prepare statement in Co....
import java.sql.PreparedStatement;
import java.sql.ResultSet;
try
PreparedStatement prpdStmt1 = am.getOADBTransaction().getJdbcConnection().prepareStatement("select full_name from per_all_people_f where person_id='"+empid+"' ");
ResultSet rs=prpdStmt1.executeQuery(); //Cursor fetch row
while(rs.next())
empname=rs.getString(1);
catch(Exception e)
System.out.println("Exception is"+e.getMessage());
t1.setValue(pageContext,empname);
Thanks
nani

HOW TO USE HIDE STATEMENT IN INTERACTIVE ALV.

Hi Friends,
              Actually i am writing the INTERACTIVE ALV.In this ALV i need to USE HIDE STATEMENT.
This is an urgent requirement.
Please anybody help me.
Thanks&Regards
Thummala Krishna Reddy.

Hi,
use the below code for Hide in ALV interactive report.
use hotspot in fieldcatalog
gwa_fieldcat-tabname   = gc_bsik.
gwa_fieldcat-fieldname = gc_bukrs.
gwa_fieldcat-outputlen = gc_12.
gwa_fieldcat-hotspot   = gc_x.
gwa_fieldcat-seltext_l = text-016.
APPEND gwa_fieldcat TO git_fieldcat.
CLEAR gwa_fieldcat.
and create dynamic subroutine like:
FORM sub_user_command1 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.                             "#EC CALLED
*Fi Documents-3rd level
CASE r_ucomm.
    WHEN '&IC1'.
      CLEAR gwa_bsik3.
      READ TABLE git_bsik3 INTO gwa_bsik3 INDEX rs_selfield-tabindex.
      MOVE rs_selfield-value TO gwa_bsik3-lifnr.
      IF rs_selfield-fieldname EQ 'LIFNR'.
        PERFORM sub_build_fieldcatlog2.
        PERFORM sub_data_retrieval2.
        PERFORM sub_display_alv2.
      ENDIF.
ENDCASE.
ENDFORM.                    "sub_user_command1
call the above user command in alv display like below code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = gv_repid
      i_callback_user_command = 'SUB_USER_COMMAND1'
      i_callback_top_of_page = 'SUB_F_TOP_OF_PAGE'
      it_fieldcat             = git_fieldcat1[]
      i_save                  = gc_a
      it_events               = git_events
    TABLES
      t_outtab                = git_bsik3
    EXCEPTIONS
      OTHERS                  = 0.
CLEAR : git_bsik3.
pl let me know if you need any more info.
Regards,
Mahesh

How to use session state protection

I use Apex 3.2.1
I access my site by a url passing a parameter like this : f?p=101:1:0::::ITEM1:1234567. There is no login and password to access the site.
The value of the parameter ITEM1 is the authorization of the first page, with a database function for the verification.
To secure my site I want to use session state protection so, I enabled it , then I defined "Arguments Must have checksum" for the page 1.
Now , when i try to acces my site with the same url it does not work.
it is the first time a try to use session state protection, could someone tell me what's wrong?

Hi user5719906,
I would suggest that as you need to pass an item and are unable to generate a checksum as you are not yet logged in, that you will need to allow arguments without checksum for this page.
This could be a bit of a hole in your security, but as long as you know it is there and clear the cache for all pages that you branch to, you should be able work around it.
The issue is that a malicious user can set page and application items via the url to an unsecured page.
Regards
Michael

How to use CONCATENATE statement?

Similar Messages

Maybe you are looking for