How to use CS4 with iOS 10.10.3

It seems that I'm unable to connect through iPhoto to photoshop. will there be an update?

I doubt it.

Similar Messages

How to use Siri with an IPad 2 iOS update to 7

Hello all, i would like to Know How to use Siri with my iPad 2. My iPad turn on iOS 7.0.2 and i don t view this possibiliy . Thank you all

Sorry, there's no Siri on iPad 2.
Siri is available on iPhone 4s or later, iPad with Retina display, iPad mini, and iPod touch (5th generation) and requires Internet access.

How to use GPS with google maps in ios 6.01

How to use GPS with google maps in ios 6.01

Settings > Privacy > Location Services.
Make sure Safari is On.

Hello. I m Harminder Singh from punjab. Currently i m using iphone5 with ios 6. 1 .bt now i want to upgrade it to ios 7. I want to know that can i upgrade it now. If yes then pls help me how can i upgrade at home

Hello. I m Harminder Singh from punjab. Currently i m using iphone5 with ios 6. 1 .bt now i want to upgrade it to ios 7. I want to know that can i upgrade it now. If yes then pls help me how can i upgrade at home

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

How to Use CS4 using C#

Hello guys am new to adobe forum. please help me. am in trouble!!!
i have got one project regarding IN DESIGN. am .net developer, i have downloaded CS4 server free trail.
can any one please tell me how to use CS4 using c# ? urgent please.

(Disclaimer: I have no personal experience with C# and IDS. My
comments are based on what I've seen from comments of others on the
scripting forum...)
Very painfully!
In InDesign there's a lot of pitfalls using C# being its a very
strongly typed language, and not really supported.
I strongly suggest you try to do it in VBS or JS instead.
You can pass VBS or JS to the doScript method from C#. Search the
scripting forum for further clues.
In Server, it's less painful, but unless absolutely necessary, you
might want to carefully consider your choice of language...
Here's some docs (taken from my archives of the scripting forum):
http://www.adobe.com/devnet/indesign/sdk/InDesign_CS3_Server_SDK_Readme.txt
(I don't have a link handy to the CS4 version.)
http://www.codeproject.com/KB/COM/Adobe_s_Indesign_COM_obje.aspx
http://p2p.wrox.com/net-framework-1-x/62966-implementing-indesign-files-asp-net.html
Also, download the SDK. There's details in the guides on how to
control IDS with SOAP using C# among other languages.
Harbs

Screens, like them? hate them? also, how to use actionscript with them.

So I haven't used a flash version since Flash 8. I've now been given CS4 and inheritid a flash document that uses screens. After 2 weeks of figuring out how the presentation is made to 'go' from slide to slide on keydown, I finally discovered today that it is the default behaviour.
Ok, so this leads me to my next question. How do people here feel about screens? Like them? Hate them? I feel like I could do half of this stuff easier with actionscript. I feel constrained by this. Not to mention I put some animation into a movie clip and it seems like it's not playing, like it's just poping right to the stop action at the end of that clip.
Can anyone tell me how to use actionscript with screens? I looked at help, but of course, the help file doesn't give me what I really need to know. I'd like to put my actions on frame one of the root and let that control everything else. But what is the syntax like? The help file recommends external scripts, but that is not an option as the CEO takes this presentation with him and I can't risk having him lose the code.
Please give me any advice you may have. Thank you!
Stan

Not that I'm any kind of expert on this matter, but I've never heard of screens, at least not by that name, and I have been fiddling with Flash for about 9 years now (like this case, I still learn new things all the time... though I'm still clueless as to what they are... chances are I won't miss 'em).
When you mentioned scenes though, my personal recommendation is along the party lines of avoid them like the plague... use one timeline and/or movieclips for everything. I have never used them in my own work, and my bias is partly due to having inherited them in other people's work... they make it hard to find things, especially when you have to first discover they're being used to begin with. From a technical stance, I have found them to be problematic to manage as far as navigation goes.

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to use variables with

I need to get the number of lines in internal table, which would
be easy, using DESCRIBE TABLE itab LINES lines. But the problem
is, that I get the name of this internal table in the field of
another internal table, so I have to use the name of internal
table as variable, but I don't know how to use variables with
DESCRIBE TABLE (or if this is possible).

Hi,
REPORT ZPRUEBA782 .
define two tables with diferent structures.
data: begin of table1 occurs 0,
registro type i,
end of table1.
data: begin of table2 occurs 0,
registro type i,
repid like sy-repid,
end of table2.
data: rows type i.
start-of-selection.
fill them with data
do 1000 times.
table1-registro = sy-tabix.
append table1.
enddo.
do 1757 times.
table2-registro = sy-tabix.
table2-repid = sy-repid.
append table2.
enddo.
call a form that receives as input the table and returns the number
of rows as output.
perform howmanyrows tables table2 changing rows.
break-point. "evaluate the number of rows
perform howmanyrows tables table1 changing rows.
break-point. "evaluate the number of rows
end-of-selection.
form howmanyrows tables itable changing rows.
rows = 0.
loop at itable.
add 1 to rows.
endloop.
endform.
You can try it if you don't find a better solution.
Cheers,
Chaitanya.

How to Use Gmail With Apple's Mail?

Answer:
Now Itis not a Problem, Please go to this link and know how to solve this problem, Ihave configuir this in my mac pro. Have enjoy.
http://picturemuseum.blogspot.com/2011/08/how-to-use-gmail-with-apple-mail.html
http://mobilesuggestion.blogspot.com/2011/08/how-to-use-gmail-with-apples-mail.h tml

I notice that it's possible to have sticky posts in these forums. See
http://forum.java.sun.com/forum.jspa?forumID=534
the Concurrency forum for an example. Posting a link to the FAQ in a sticky post might reduce the number of FAQs asked here by maybe 1%? Or posts like this one might do well as a sticky?

How to use Count with Date Parameters

Hello,
I am having issues using the Count() function in conjunction with date parameters.
This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
Anyone have a suggestion on how to use Count() with date parameters?
Thanks.

Any chance you can get the date formats in the correct format from siebel?
I don't know Siebel - so I can't help you with that. If you get the correct format it is just
<?count(row[(FromDate>=date) and (date<=ToDate))?>
Otherwise the approach would probably need to use string function to get year/monthd/day from the date
and store it into a varialbe and compare later the same way
<?variable@incontext:from; ....?>
<?variable@incontext:to; ...?>
<?count(row[($from>=date) and (date<=$to))?>
Potentially you can use the date functions such as xdofx:to_date to do the conversion
[http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
But I am not sure if they are available in your siebel implementation.
Hope that helps

How to use javap with jar files ?

how to use javap with jar files ?
thanks

As long as the jar is on the class path, your gold. So,
javap -classpath myjar.jar mypackage.MyClass
Chuck

Help me!! How to use JavaScript with JSP ??

I am using JDeveloper and I created a screen in JSP which uses a bean for database connectivity and retriving info onto the page.
The page has a ListBox where list items are populated from the database.My requirement is
whenever the list is changed the page shuold be refreshed with the selected item info.
I tried to use 'JavaScript' for triggering the event with 'onChange' event of the ListBox.But the event is not getting invoked. I think JavaScript is not working with JSP.
Please help me with how to Use javaScript with JSP or any other alternative where I can meet my requirement.
I have one more question...I have gone through the JSP samples in OTN and I am trying do download the sample 'Travel servlet' which show list of countries...etc
I have also gone through the 'readme' but I don't know how to extract .jar file.
I would be great if you could help me in this.
Thanks!!
Geeta
null

We have a similar need. We have used Cold Fusion to display data from Our Oracle Database. We have a simple SElect Box in HTML populated with the oracle data. When someone selects say the State of Pennsylvania. then we have an On change event that runs a Javascript to go get all the cities in Pennsylvania.
Proble we are having is that inorder for the Javascript to work , we currently have to send all the valid data.
Do you know of any way to dynamically query the the Oracle database in Javascript

How to use log4net with C# clients

Hi,
Can anybody please give an example of how to use log4net with C# clients? Foe java clients you can use the
<logging-config>
<destination>log4j</destination>
How do we use it with C# clients? Any example will be appreciated.
Thanks.
-ali

Ali,
The following is an example on how to define a custom logger (including log4net) in tangosol-coherence-override.xml for coherence .NET client; you need Coherence .NET client 3.7.1 patch 1.
<coherence xmlns="http://schemas.tangosol.com/coherence">
<logging-config>
<destination>common-logger</destination>
<logger-name>log4net</logger-name>
<severity-level>9</severity-level>
<message-format>(thread={thread}): {text}</message-format>
<character-limit>8192</character-limit>
</logging-config>
</coherence>
You also need to configure log4net in app.config. Please see the following web page for more information:
http://netcommon.sourceforge.net/docs/2.0.0/reference/html/ch01.html
-Luk

How to use assert with wireless toolkit?

Hi,
I am trying to find out how to use assert with wireless toolkit. I have found that I need to pass "-source 1.4" to the java compiler. But I can't find any documentation on how to do it.
I'm using J2ME Wireless Toolkit 2.2.
thanks
Ludde

Here's a quote from an article on Java World at http://www.javaworld.com/javaworld/jw-11-2001/jw-1109-assert.html
"To support the new assertion facility in J2SE 1.4, the Java platform adds the keyword assert to the language, an AssertionError class, and a few additional methods to java.lang.ClassLoader."
So I really think it's part of 1.4.

How to use setSoTimeOut() with socket ??

HI All!
I eagerly need to know how to use setSoTimeOut() with socket (on server side).
Actually the scenario is that My Server accepts connection and waits for connected client to send data to it. I WANT TO KEEP, IF CLIENT DOENS'T SENDS ANY DATA TO SERVER WITHIN 5 min. THEN SERVER MUST CLOSE THE CONNECTION, BUT IF SERVER RECEIVES STILL A BYTE FROM THE CLIENT WITHIN 5 mins., THE SERVER MUST RESET CHECKING TIME OUT FOR NEXT 5 MINUTES.
How can i do that??
Any help with example will be appreciated!!
Thanx in advance

you'd have to do something like this:
(this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
ServerSocket ss = new ServerSocket(myPort);
Socket s = ss.accept();
s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
boolean running = true;
while(running)
try
String readIn = in.readLine();
// do whatever you want with the data read
catch(SocketTimeoutException)
running = false;
Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
Good luck,
Radish21

How to use CS4 with iOS 10.10.3

Similar Messages

Maybe you are looking for