How to use debug on CSM SSL module?

I'm installing a new CSM with SSL module (WS-X6066-SLB-S-K9) and can't get the debugs to work. Acutally, I enabled debugging (to troubleshoot SSL Handshake problems) but nothing shows up on the screen or in the log. Any ideas?
mcbconmrk105d1z2-ssl#show debugging
STE Mgr:
STE SSL Pkt debugging is on
STE SSL Handshake events debugging is on
STE SSL Alert events debugging is on
STE SSL detailed debugging is on
STE SSL error events debugging is on
SSL Subsystem:
SSL Handshake Message debugging is on
SSL Traffic debugging is on
SSL Error debugging is on
SSL Event debugging is on
mcbconmrk105d1z2-ssl#show log
Syslog logging: enabled (0 messages dropped, 31 messages rate-limited, 0 flushes, 0 overruns, xml disabled)
Console logging: level debugging, 254 messages logged, xml disabled
Monitor logging: level debugging, 241 messages logged, xml disabled
Logging to: vty4(0)
Buffer logging: level debugging, 284 messages logged, xml disabled
Logging Exception size (8192 bytes)
Count and timestamp logging messages: disabled
Trap logging: level informational, 324 message lines logged
mcbconmrk105d1z2-ssl#
Thanks in advance,
Daniel

the debug messages are displayed on a different console. The console is different depending on the type of debug.
telnet 2001 ? FDU cpu
telnet 2002 ? TCP cpu
telnet 2003 ? SSL cpu
Gilles.

Similar Messages

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to use a user defined function module in IP

Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,

Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards

How to use debug my jdevloper devloped jsp applications using tomcat 4.0?

hello,
how to use debug my jdevloper devloped jsp applications using tomcat 4.0?
how to run with using tomcat path with browser?
can any one help?
thanks
pullareddy

Hi Pullareddy,
Charles' answer will work for Servlets in Tomcat, but debugging JSPs is a bit more complicated than debugging Servlets.
Here's what you need to do:
(I don't have Tomcat, so I don't know the details of Tomcat configuration files and I can't guarentee that Tomcat provides the flexibility so that you can configure it for debugging JSPs. Each application server is configured a bit differently. Hopefully you can adjust the following instructions to Tomcat.)
1. You need to replace Tomcat's JSP engine with OJSP and you need to setup debugging parameters for OJSP.
This is not specifically in the JDev documentation, but you may be able to apply the information found in the topic "Remote Debugging in OC4J".
Here are some tips:
A. You'll probably need to specify the following jars in some Tomcat config file: ojsp.jar, ojsputil.jar, xmlparserv2.jar, ojc.jar, and jdev-rt.jar.
B. The OJSP class name is oracle.jsp.runtimev2.JspServlet.
C. The debug parameters are:
debug_mode = true
developer_mode = true
encode_to_java = true
emit_debuginfo = true
jspjavacompiler = oracle.jdevimpl.jsp.JspOjcCompiler
2. You need to make Tomcat start the Java command with debugging options. (This is what Charles was talking about. One of the debug options is -XXdebug). This is in the JDev documentation in the topic "Starting a Java Process in Debug Mode". Please read that documentation help topic.
3. You need to delete any old .java or .class files which were created in the past for your JSP. If you leave old .java or .class files around, then the debugger may not be able to stop at breakpoints in your JSPs. So, be sure to clean up old files.
4. Set your project settings for remote debugging. This is on the Debugger - Remote panel in the Project Settings dialog box. You probably want either Attach to OJVM or Attach to JPDA. Which radio button you choose depends on what command line options you specified in step 2.
-Liz

Load Balancing with a CSM & SSL Module

I'm trying to understand the best way to balance traffic to two servers when decrypting and re-encrypting with the CSM and an SSL module. I take the SSL traffic hitting the first CSM VIP and forward to the SSL module for decryption. Send the decrypted traffic back to another VIP on the CSM. Send the traffic to the client proxy VIP on the SSL which encrypts the traffic and forwards to the CSM VIP. That final VIP passes the traffic to the serverfarm containing the actual servers. How do I make sure the traffic is balanced between the final VIP and my servers. It seems that sticking on SSL session ID is the only way to go at that point which made decryption pointless. I feel like I'm missing something basic here.
Thanks..

Hi David,
Here find some full config example for your perusal for CSM and SSL Services Module Initial Configuration Example
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a0080216c16.shtml
2nd config example to Configuring CSM to Load Balance SSL to a Farm of SCAs for One-Armed Proxy Mode
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00801aca55.shtml
Sachin garg

HTTPS Keepalive with the CSM & SSL Module

Has anyone had any success getting a secured web page for a keepalive using the CSM with and SSL module. If so can post an example?
Thank you,
Dave

Hi David,
Here find some full config example for your perusal for CSM and SSL Services Module Initial Configuration Example
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a0080216c16.shtml
2nd config example to Configuring CSM to Load Balance SSL to a Farm of SCAs for One-Armed Proxy Mode
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00801aca55.shtml
Sachin garg

How to use SET & GET Parameters in Module Pool

Hi Friends,
Can anyone please tell how to use SET / GET parameters and PARAMETER ID for a text box (Input / Output field ) in module pool? What is the purpose and where do we need to do coding for it?
Note : I will definitely give the marks for good responses.
Thanks in advance,
Pradeep

Hi Pradeep,
You can save values in the SAP memory using a parameter ID. These
are user and terminal-session specific, but available to all internal and
external sessions.
SET Parameter copies the corresponding field contents into the SAP
System memory in the PAI processing block.
GET Parameter copies the corresponding field contents from the SAP
memory at the end of the PBO processing block, after data has been
transferred from the program, if the screen field still has its initial value
You can link an input/output field to an area of the SAP memory in the
ABAP Dictionary.
When you use an input/output field that is defined in the ABAP
Dictionary, its parameter ID is displayed in the Dictionary attribute
Parameter ID in the Screen Painter.
Usage
SET PARAMETER ID: CAR FIELD space,
CON FIELD space,
DAY FIELD space.
Here is the link that explains the usage of GET/SET in detail
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm</a>
Regards,
Sharadha

How to use Exceptions for a function module

Hi folks,
        I have created a new function module.Its working fine, but i am not aware of using exceptions for a function module. I hav just declared an exception in the 'exception' tab. Could any body explain me how to use that in my FM source code....Thanks...

Hi Shyam,
Have a look at this,
START-OF-SELECTION.
gd_file = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gd_file
      has_field_separator     = 'X' "file is TAB delimited
    TABLES
      data_tab                = it_record
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
    IF sy-subrc NE 0.
      write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
      skip.
    endif.
Regards,
Sai

How to use ET_ATTACH importing parameter Function module BBP_PD_SC_CREATE

hi,
how to use ET_ATTACH importing parameter of Function module BBP_PD_SC_CREATE, my requirement is to create SC with attachment.
an example would really help.
Kind Regards,
Kailash.

Hi,
Generally we create the SC from ITS or Portal, and there in the Create SC screen , once you add the item into the shopping cart , in the Item details, there is the section called , Documents and Attachements, where in you can upload the attachments which ever you want. Sometimes the extn .DOC, .pdf and .xls are allowed. but that also you can check which are the Authorized files extns avaialbe in Backend R/3.
Using the FM RFC_READ_TABLE, in table pass TDWP and in the i_field pass 'APPSFX' and then you can get the authorized file formats. in Backend Transaction DC30 you can verify which are the allowed file formats.
Moreover for restricting the User from uploading the attachment BADI BBP_ITEM_CHECK_BADI can be implemented for raising the error message if required.
Regarding the ET_ATTACH, it is the structure of type BBPT_PDS_ATT_T, so you have to provide the complete details for this structure. Like : GUID, P_GUID ,LOGICAL_SYSTEM, DESCRIPTION, URL, TYPE,DISP_URL, PHIO_EXT ,etc.
Once all the entries are fine.
You can create the SC, but the recommeded way for creating the SC is thru ITS or Portal.
I hope this will help. Feel Free while asking questions.
Thanks and Regards,
Ankur Goyal

How to use prepared statement by Application Module on ADF?

Hello
i am using a prepared statement on the view side of my project,
this is my code, i'm not sure about using this code.
AppModuleGFTImpl am = (AppModuleGFTImpl) Configuration.createRootApplicationModule(amDef,config);
try {
ps =am.getDBTransaction().createPreparedStatement("Select * from XXXXXX where kullanici_id=? and sifre=?",0);
ps.setString(1, kullanici);
ps.setString(2, sifre);
rs = ps.executeQuery();
if (rs.next()) {
girebilir = true;
} else {
girebilir = false;
ps.close();
rs.close();
//am.getDBTransaction().closeTransaction(); ? I'm not Sure
//Configuration.releaseRootApplicationModule(am, true); ? I'm not Sure
Is it True? How we use this code on the project view side? Must we close Transaction, or release application Module.
thanks for interest.
sorry my english.

Hello, for the SP you can use something like this in your application module
private static final String BULKSTAMMENN =
    "begin IVA_OWNER.IVA_UI_ALGEMEEN_PCK.USM_SNELLE_INVOER_GUI( P_RLE_ID => :1, P_AANTAL => :2, P_OJR_JAAR => :3, P_RAS_ID => :4, P_TOELICHTING => :5, P_SUCCES => :6 ); end;";
public void bulkStamen ( int rasId, int telerId, int jaar, int aantal, String toelichting ) {
    CallableStatement bulkStamenSP = null;
    try {
      bulkStamenSP = getDBTransaction().createCallableStatement( BULKSTAMMENN, 0 );
      bulkStamenSP.setInt( 1, telerId );
      bulkStamenSP.setInt( 2, aantal );
      bulkStamenSP.setInt( 3, jaar );
      bulkStamenSP.setInt( 4, rasId );
      bulkStamenSP.setString( 5, toelichting );
      bulkStamenSP.registerOutParameter( 6, Types.VARCHAR );
      bulkStamenSP.executeUpdate();
    } catch ( Exception e ) {
      log.warning( "Aanroep naar " + BULKSTAMMENN + " gefaald, " + e.getMessage() );
    } finally {
      if ( bulkStamenSP != null ) {
        try {
          bulkStamenSP.close();
        } catch ( Exception e ) {
          log.warning( e.getMessage() );
    log.info( "Stammen bulk uitgevoerd voor " + rasId + " " + telerId + " " + jaar + " " + aantal + " " +
              toelichting );
}You can then drag this method onto your page or right into your task flow if your using JDev 11.
Also you can access it from a backing bean although the methods above are preferred
-Anton

How to use SquirrelMail and Require SSL for IMAP Service?

Hello,
Mac OS X Server v.10.4.9 – Open Directory Master
Providing POP, IMAP, SMTP, web services including webmail via SquirrelMail.
PHP v.4.4.4 Nov. 1, 2006
OpenSSL v.0.9.7l Sept. 2006
I need to require SSL for IMAP access, however, I also need to provide webmail access. SquirrelMail does support TSL it seems and that can be configured from /etc/squirrelmail/config/conf.pl and is discussed briefly here: http://www.squirrelmail.org/wiki/SquirrelMailIMAPS .
When I turn on TSL on SquirrelMail and change the IMAP port number to 993 attempting to log into SquirrelMail provides the following error:
Bad request: IMAP server does not appear to support the authentication method selected. Please contact your system administrator.
According to the above noted page from the SquirrelMail site one needs PHP 4.3 and SSLv3 in order for TSL to work, one must also connect to the IMAP server over port 993. Requirements I appear to meet.
So – how can one require the use of SSL for IMAP and still provide webmail access via SquirrelMail?
I have reviewed these three threads:
http://discussions.apple.com/thread.jspa?threadID=912841&tstart=75
http://discussions.apple.com/thread.jspa?messageID=1457773&#1457773
http://discussions.apple.com/thread.jspa?messageID=3921004&#3921004
However they do not answer the fundamental question of how to use SquirrelMail with SSL required by IMAP. Essentially the conversation revolves around working around the SSL requirement or forgoing it.
Thank you for any assistance.

David,
Yet from time to time these same users are in a
circumstance where they need to use webmail, thus
SquirrelMail needs to work. I am not trying to
secure webmail by requiring SSL.
I see, your problem. In this particular case there is a workaround.
Use different ports for postfix and cyrus limited to localhost, thus catering only to SquirrelMail, thus not needing TLS.
Roughly do this (this is just off the top of my head, may contain errors):
For SMTP / Postfix:
Edit /etc/postfix/master.cf
and add:
465 inet n - n - - smtpd
-o smtpdrecipientrestrictions= permit_mynetworks,reject
-o mynetworks=127.0.0.1/32
-o smtpdenforcetls=no
# This will create a port 465 (if you use this alreay pick another one. choose the number wisely, depending ony what is in use on your server)
# This port is only accessible to IP number in "mynetworks"
For IMAP / Cyrus
Edit /etc/cyrus.conf and add (below imap):
imaplocal cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imap" prefork=0
Next duplicate /etc/imapd.conf and name it imapd-local.conf
Edit /etc/imapd-local.conf
Change
tlsserveroptions: require
to
tlsserveroptions: use
Next edit:
/etc/services
and create a port called "imaplocal"
(you could probably recycle 585 wich is deprecated, check what is in the services file, make sure no duplicate port numbers).
should look something like:
imaplocal 585/udp
imaplocal 585/tcp
When done with all config files:
Save & restart mail services
Point SquirrelMail to the new ports wich should only be accessible to localhost (check with an external client if it holds
Sorry for the "draft style" post, but I don't have much time.
Just ask, if anything isn't clear.
HTH,
Alex

**How to use Logic as a sound module with an MPC?!?!**

So I'm new to Logic, I love the program but don't know a thing about the environment... I've seen people discuss this a lot on the forums but I still haven't been able to figure it out.
Basically, I am using an MPC 2500 and would like to use Logic as a sound module.
I know you have to create a new multi track instrument in the environment but as a newbie I just can't seem to put the pieces together. I tried and tried but when I create a new instrument all I get is a box with 16 channels!?
Does someone have a similar setup? Would anyone mind sending me their environement?
MacBook Pro Mac OS X (10.4.7)

Pictures worth a thousand words and stuff:
http://bj.angeltowns.com/images/log_cs.jpg
Here I've disconnected the physical input object from the sequencer object (called "to recording & thru")
I've created a channel splitter object, and cabled the physical input object to it. I'm now in the process of option-clicking the channel splitter's output cables (one for each MIDI channel) - ()option-clicking the output cables is a shortcut way to cable to objects on different layers) - and selecting channel 1 (and thus cable 1) to go to Audio Instrument 1, channel 2 (cable 2) to Audio Instrument 2 etc.
So the MIDI comes in to Logic, gets split into individual channels, and each channel goes to it's own audio instrument via a cable, which you can put any plugins on.
You can't record into Logic this way now, as we've bypassed the sequencer, but I think you need it simple at this stage

How to use Auto layout in book module

Hi,
I got a MBP mid-2010 15" running OS X Lion.
I´m trying to get the auto layout to work with presets. I might be doing something wrong here though:
1. "Edit Auto layout preset"
2. Choose for instance "Wedding" layout
3. Save preset
If I then click on "Auto Layout" it creates the book, but only with "1 Photo" on each page
If I then click on edit "Auto layout presets" again and choose the preset I just created, the layout option says "1 Photo" (I chose wedding)
No matter how I try to save this it goes back to 1 Photo.
What am I doing wrong here? Is it some kind of bug?
Thanks,
Tor Olav

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to use ejbs for accessing Function Module.

Hi,
I want to call ABAP function module using ejb(Since I want to expose them as web service on different server). I know how to do that using Models, but dont know how to go ahead using ejbs.
Could you please guide me on this?
Regards,
Abhijeet.

Hi,
In another thread with a similar question I found these references:
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
And this code example:
          HashMap result = new HashMap();
          Object ret = new Object();
          JCO.Client mConnection = null;
          mConnection = getConnection();
          JCO.Repository mRepository;
          mRepository = new JCO.Repository("R3", mConnection);
          JCO.Function function =
               createFunction("Z_ISA_GET_ORDER_ITEM_INFO", mRepository);
          function.getImportParameterList().setValue(orderNum, "ORDER");
          if (function != null) {
               mConnection.execute(function);
               JCO.Table codes = function.getTableParameterList().getTable("INFO");
               for (int i = 0; i < codes.getNumRows(); i++) {
                    codes.setRow(i);
                    int tmp = new Integer(codes.getString("POSNN")).intValue();
                    String tmpStr = new String(Integer.toString(tmp));
                    ret = result.put(tmpStr, codes.getString("VBELN"));
          } else {
               System.out.print("Fxn call failed for Z_ISA_GET_ORDER_ITEM_INFO");
          JCO.releaseClient(mConnection);
Good luck,
Roelof

How to collect debug logs for custom module only in EBS by AppsLog.write?

Hi,
Customer is trying to retrieve logs for their custom module (XXKCZ) and
put it to /log/kcz.log by using AppsLog.write() method. (refer to sample code below)
Customer has set these profile values in the application level and removed the values
in the site level. But the file /log/kcz.log is created but does not have any lines in it.
Is there something wrong to the coding of AppsLog.write?
Application Name "xxkcz"
　FND: Debug Log Enabled "Y"
　FND: Debug Log Module "xxkcz%"
　FND: Debug Log Level "UNEXPECTED"
　FND: Debug Log Filename "/log/kcz.log"
　---- [Sample Code starts] ----
　Package jp.kaikei.oracle.apps.xxkcz.util.server;
　import oracle.apps.fnd.common.AppsContext;
　import oracle.apps.fnd.common.AppsLog;
　import oracle.apps.fnd.common.Log;
　public class CommonLog{
　public void initLog() {
　AppsContext appsCtx = new AppsContext();
　AppsLog appsLog = appsCtx.getAppsLog();
　appShortname = "xxkcz"
　message ="Message started"
　CLASS_NAME = "jp.kaikei.oracle.apps.xxkcz.util.server.CommonLog";
　String moduleName = appShortName + "." + CLASS_NAME + ".initlLog;
　appsLog.write(moduleName, message, Log.UNEXPECTED)
　---- [Sample Code ends] ----
Any advise?
Thanks.

May be some initialization is missing,
I have created my own writetoFile method,
if you want you can try this,
* Method to write the debug messages into a File
public void writeFile(String debugMsg, String userName)
String logDir = (String)this.getOADBTransaction().getProfile("XXPO_OA_PDT_PDT_DEBUG_DIR");
BufferedWriter out;
//DateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy HH:mm:ss");
Date date = new Date();
// if(logDir ==null)
// logDir = "/ebsgld/ebsgldcomn/temp/";
String fileName = logDir+userName+"-pdt_log.log";
//createDiag(XXPO_APP_SHORT_NAME,"[AM]fileName "+fileName);
try
out = new BufferedWriter(new FileWriter(fileName,true));
out.write("\n\n" + debugMsg);
out.close();
} catch (IOException e)
//System.out.println("exception in Writing the log file "+e.toString());
//createDiag(XXPO_APP_SHORT_NAME,"[AM] Exception in Writing the log file "+e.toString());
//Only start and end file
if(debugMsg.indexOf("##########")!=-1)
String impFileName = logDir+userName+"-pdt_imp_log.log";
// System.out.println("File Name is "+fileName);
try
out = new BufferedWriter(new FileWriter(impFileName,true));
out.write("\n\n" + debugMsg);
out.close();
} catch (IOException e)
createDiag(XXPO_APP_SHORT_NAME,"[AM] exception in Writing the log imp file "+e.toString());
With regards,
Kali.
OSSI.

How to use debug on CSM SSL module?

Similar Messages

Maybe you are looking for