How to use delagated google task OsX iCal (not iOs, OsX!)

Hi,
So I have this little problem here. In Os10.7 I managed to get my gmail calendar in iCal, but the delegated TASKS are not showing in the Reminder.
I somehow have the same problem no my other computer, with Mountain Lion.
Is it simply impossible, or am I just forgetting something? This is crucial, because I have little interest in using iCal & Reminders if I cannot sinc with google (reason is, I am also using a PC)
thanks

NULCGI wrote:
My problem is; How can I get the Software back again - off these old Installer disks?
Use Pacifist.
Also, be aware there is software that will run fine in Mt. Lion but fails to function properly in Mavericks. Logic 8 is apparently one example of this phenomena.
Snow Leopard, if it will boot and run on your iMac is probably your best option; even over Tiger or Leopard. Be sure to install the optional Rosetta (and IMHO, QuickTime 7).
You have a computer that is running 10.9.x Mavericks and put in your DVD drive your old install disk only to find a line crossed through it? The universal "no" symbol meaning it won't run?
This is usually a sign of PowerPC software which should run in Snow Leopard with Rosetta installed but not in Lion or thereafter without virtualization of SL.
I would not want to run this (CAD) software under any form of emulation mode - that would really kill its performance.
If virtualization becomes your only option: Do not forget that your older software will have better performance running on today's more powerful CPU's (i5, i7, etc.) in emulation/virtualization than they did on the older G4, G5 PowerPC CPU platform.
That being said CAD may have complex graphics that do not work well in virtualization.
You're just going to have to experiment and find the best operating environment for your software.

Similar Messages

How do I sync exchange tasks with iCal?

How do I sync exchange tasks with iCal?

For all of the wonderful and awesome things Apple has done and is doing (including winning me over from the Microsoft camp) there are certain things they absolutely are failing at. Syncing is one of them. If you want/need Exchange tasks synced with iOS 5 Reminders, USE OFFICE 2011 on Mac OSX Lion instead of iCal, Mail and Address Book and then LIFE IS WONDERFUL!!! Works beautifully... Exchange notes work great on Mac in Office 2011 but doesn't yet sync to iPhone notes (hopefully that will eventually get there too). Pass this around, I spent hours to figure this out...

View google tasks in ical

I didn't see any other users asking this question! Only 11 "related" questions. None applied.
So here goes:
I can see my google calendar events just fine in iCal.
How can I see my google tasks in iCal???
thanks for insight!

Whether the solution is the problem? since it is very inconvenient.
I like I bring to contact children's birthdays, anniversaries, date of death, and so on.
And I want to make it all displayed in the calendar.
Then the meaning of the item in the contacts if it can not be controlled?
It turns out a half-measure, and those with no no value, not to speak about the practicality!

How to use the Google Android Emulator in Flash Builder on Windows 7?

I want to try out Flash Builder to create an app, but I cannot find out how to use the Google Android Emulator in Flash Builder. The simulators in Flash Builder work, and the android emulator is installed correctly and can run. I just can't seem to connect them. How do I do that?

Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store

SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

Pratik,
Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
An emergency workorder is created in SAP and assigned to the technician.
The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
If you are looking to do something else with GCM that would be outside of Agentry.
--Bill

I have no idea how to use Firefox. I used to have Internet Explorer 7 but am unable to connect to it anymore. How do I use Firefox? I know how to use a computer, somewhat, but am not as savy as I'd like to be. I will appreciate your help.

I have no idea how to use Firefox. I used to have Internet Explorer 7 but am unable to connect to it anymore. How do I use Firefox? I know how to use a computer, somewhat, but am not as good at it as I'd like to be. I will appreciate your help.

You can look at this post in this MozillaZine forum thread about inspecting a sessionstore file and possibly extract URLs.
*http://forums.mozillazine.org/viewtopic.php?f=38&p=12098147&start=60#p12098147
You can open the Browser Console (Firefox/Tools > Web Developer).
Paste the JavaScript code in the command line and press the Enter key to run the code.
*Toggle the devtools.chrome.enabled pref on the <b>about:config</b> page to true to enable the command line
*https://developer.mozilla.org/Tools/Browser_Console#Browser_Console_command_line

I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

Step by step:
1. On your main vi Front Panel, create your boolean indicator.
2. On the block diagram, right click the new boolean indicator and select Create - Reference.
3. On sub-vi front panel, create boolean indicator (or use one that is already created).
4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
7. Wire the BoolRefnum to the reference input of the property node.
8.
Right click on the property node and select Change to All Write.
9. Move mouse to point to Visible inside property node box, left click and select Value.
10. Wire the boolean indicator from step 3 to the Value input of the property node.
11. On sub-vi front panel, right click on icon and select Show Connector.
12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
14. Save and run.
Here are the modified vi's.
- tbob
Inventor of the WORM Global
Attachments:
Pass_a_Reference.vi ‏20 KB
GL_Flicker_mod.vi ‏83 KB

How do I synch the tasks in ical with my Iphone?

The tasks in ical on miy Imac do not synch with ' herinneringen' on my iphone. Does anyone has a solution?

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iDevice on your devices, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do you link Google calendar to iCal in Maverick?

Just downloaded Maverick (great) to my late 2008 aluminium laptop but cannot link Google Calendar with iCal. In iCal tried deleting old account and re-entering but still iCal does not sync, although it still does on iPad and iPhone. Any ideas?

Hi there,
I have tested this out on my backup disk and there is a slight modification to the method. Will highlight this with quotation.
================================================================================ ==
It appears that once upgraded to Mavericks, the calendar folders are no longer compatible with the latest version of iCal. Hence why it crashes.
To remediate,
Close the iCal App
Duplicate the folder (For Backup reason) /Users/YOURPROFILE/Library/Calendar
Delete all content with in /Users/YOURPROFILE/Library/Calendar
Go to:-
System Prefences | Internet Account | iCloud
Uncheck Calendars, Recheck Calendars
Select the iCloud profile
Press "-" to delete the whole iCloud profile.
Recreate the iCloud profile by select "+" then iCloud
Enter your iCloud Username and Password
It will asked you if you wish to merge the database. (You may have to do this more then once)
For every other google calendar
Uncheck Calendars (if already checked), Recheck Calendars
Hopefully this will recreate all the calender folders within /Users/YOURPROFILE/Library/Calendar and start re-syncing.
Once you are satified that all your calender are syncing, delete the /Users/YOURPROFILE/Library/Calendar copy
Good Luck.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

ISight - Green Scree, not connected/in use - Works in windows... not in osx

Sorry to create ANOTHER thread here, but no one has seemed to mention this yet.
I got my macbook pro 4 days ago (first mac!) and i love it!
On opening it up, had a bit of a blast around, then tried photobooth and was greeted with the No camera, or camera in use message.
Lovely! rebooted, still the same, checked in the sys profiler and it wasnt even appearing as a device (should be under usb).
I tried many things to fix it, Resetting NVRAM and Power Cycling, nothing working...
I got fed up with fixing it and installed bootcamp.
After installing the drivers i loaded the camera in XP... and it worked!
Jumping back into osx, i see that the camera is now reconised by the system (under USB in the system profiler) but every program that can access it is either displaying green or black.
I read that bootcamp had updated isight drivers, so i checked my version... wich is 1.84
the latest drivers supplied with bootcamp are 1.82??
perhaps this is the problem? even a fresh install of osX did not get the cam working! odlly... only windows managed it!
I love this machine, its great! wish it 'just worked'
i was thinking i will try extracting the isightdrivers.pkg from the bootcamp installer and see if i can downgrade!
I may just take it in to an apple shop though... ive only had it 4 days!
also Apple didnt forward on my house number to the couriers (they had it, it was the billing address!), so the package wasnt delivered, the courier just put it through as 'unable to collect'... then the courier didnt re-schedule my delivery when i asked them to so i had to go pick it up!!!!!! - not impressed apple!
iSight could be a driver problem! Has anyone else who has the green screen probs found that the isight works in windows?
The iSight on mine hasnt worked once in Osx! It annoys me though that its working in windows... i dont like software problems i cant fix...
Macbook Pro 2.16 / 2gb / 120Gb / 128mb Mac OS X (10.4.9)

Welcome to Apple Discussions, MrNibbles
You did well in creating your thread - a perfect use of Apple Discussions.
As explained in the Apple Discussions Help pages, Apple Discussions is a user-to-user support forum.
Therefore, your comment that you are "not impressed apple!" with your Apple Store service regarding delivery may be better addressed via item "9." on the right side of this page
http://www.apple.com/support/store/
This method will allow you to send written comments about your problem directly to Apple. I know that contacting Apple now cannot undo the fact that you needed to travel rather than having your parcel delivered, but your message will get directly to Apple if you use the web mail page.
<hr width="85%">
Your new Mac certainly ought to work properly out of the box. You sound like an experienced computer user. It is unfortunate that you are having problems with your new Mac's iSight. I do not have an iNtel Mac, but, if you get no better suggestions here, here are a couple of ideas you can consider.
Have you tried Apples suggestions re: the Built-in iSight in How to Troubleshoot iSight?
If your OS X System Profiler still does not recognize your (USB) built-in iSight after trying those suggestions, I think you are wise to follow your instinct to "take it in to an apple shop".
If the trek to your "apple shop" is an inconvenience for you, and if you have not already done so, you might want to try a software reinstall.
Back up any important data you have already accumulated, and then use the "Restore" Software disk that came with your new Mac to zero your hard drive. Finally, reinstall the software and finish with a Permissions Repair.
Once you have performed a known-good installation of all software, you should never need to reinstall again. There are no guarantees, but a fresh install might save you a trip.
Jim
Mac OS X (10.4.9) G5 DP 1.8 External iSight

How to use formatter if binding syntax is not complex

Hello all,
i know how to use formatters in UI5 HTML views when data-sap-ui-xx-bindingSyntax="complex"
But currently i have an app where the bindingSyntax is not set to complex, and for certain reasons i don't want to change that at the moment.
How do we use formatters in non-complex binding mode? I cannot find anything about that in the docs. Constructs like data-something="{path: ' ', formatter : ' ' }" seem not to work in non-complex mode.
Thanks in advance,
Jan

Hi,
you can use formatter function. refer SAPUI5: How to directly bind two data properties into one control property using OData model? and javascript - SAPUI5: How to directly bind two data properties into one control property using OData model? - Stack Overf…
Regards,
Chandra

How can I edit google tasks on my ical?

Please help. I don't know how to do. Is there any possibility how can I manage this? Thanks a lot

YOu can't just go to the site. It has protocols that the iPad won't run, but like the others have said, the app version will since it was made just to work with the iPad

How to use styled google maps in muse cc??

i've been searching for styled maps for muse but to no result.using google maps styler i generated a source code but its not usable in muse.
give me some suggestions please..
thanks..!!

    "featureType": "road",
    "stylers": [
      { "saturation": -92 }
    "featureType": "transit" },{
    "elementType": "labels.text.stroke" },{
    "stylers": [
      { "visibility": "on" },
      { "weight": 1 },
      { "lightness": -6 },
      { "hue": "#ffe500" },
      { "saturation": 8 }
its a javascript code..how can i implement it in muse...

How to use the google search from inside a java program

Hi guys
How can i use google search in my java program?
What will be the type of the reply i get back from google?
Thanks in advance
[http://javamilestone.blogspot.com/|http://javamilestone.blogspot.com/]

Hi,
You have here some examples about how to make search on google from a Java application.
The type of reply is JSON
Here some documentation about it:
[http://code.google.com/apis/ajaxsearch/documentation/#fonje|http://code.google.com/apis/ajaxsearch/documentation/#fonje]
And here some snippets:
[http://code.google.com/apis/ajaxsearch/documentation/#fonje_snippets|http://code.google.com/apis/ajaxsearch/documentation/#fonje_snippets]
Regards,
David.

How to use the google play RSA code on a Mac?

Hi,
I´ve just finished my first Android App using Flash CC and I´d like to upload it to the Google Play Store.
Now Google says there is a RSA-Key Code I have to use ... somehow.
Can anyone tell me what I´ve got to do with it? And please explain it for Dummies
I´ve been searching for some hours now, but I didn´t find anything helpful / anything I could work with. Most Tutorials and Instructions are for FlashBuilder or PC users. Nothing I could use or even understand
I´m working on a Mac using Flash CC - so I´m stuck right now.
So please - HELP ME!
Best regards
Jan

Hi Pahup,
Thank you for your reply!!
I adapted an Android App using Flash CC on a Mac. I already published this App for the Apple App Store. When I published the App for Android I chose Air 3.7.xxx for Android. I also created the p12 certificate using Flash CC in the publishing settigns for Android. So my App is theoretically finished and ready for Upload.
When I went to the Google Play Store Developer Console I had the options to
1.) Upload APK
or
2.) Prepare Store Entry
...so I prepared the Store entry first. When I go to "APK"-Tab in the console it looks like this:
... it says "Upload APK" and the Button below "Get Licence Key". When I click on the license Key Button it looks like this:
So I think I should enter this RSA-Key somehow into my App BEFORE uploading it to the Google Play Store. This is recommended when an Ap is set to be paid. My Application is set to paid.
I did not use any kind of licensing API (until now - cause I don´t know how and what it is for)
This is all new to me. It is the first App I want to bringt to the Android market. I really hoped it would be as easy as getting an app into the Apple App Store. I found so many step by step instructions for dummies on "How to get an Flash iOS App into the App Store plus creating all the certificates needed", so I thought it would be the same for Android. But there is no help at all at the moment. I am totally confused.
So any help, hint or instrusction would be great!!
By the way - this is the App I want to get into the Google Play Store

How to use delagated google task OsX iCal (not iOs, OsX!)

Similar Messages

Maybe you are looking for