How to use Desktop Manager to synchronize several address books?

Customer found on BlackBerry device - address book options - there's 2 Desktop under Address Books. How to specify which address book will be synchronized with outlook via desktop manager as  a wired sync?

Your having this issue, because at first, your blackberry was trying to sync via the BES, then you hooked it up to the desktop manager. The desktop managed then tried to sync the device over the wire via the desktop manager and turned of wireless sync, how do you wanna sync, wirelessly, or through the BES?
If you wanna do it through the BES, you have to delete desktop cmime, desktop sync and desktop cical and resent those from the server to get wireless sync back.
to get to servic book, go to settings/options/advanced options/service book and scroll to these service books and delete them, then from the bes manager, repush service books will resent them, this  can take up to 15 minutes though.
If you wanna sync via the wire, just sync with the desktop manager, you should not be trying to do both
If someone helped you give them kudos. Research all info!

Similar Messages

  • Add or edit address book using Desktop Manager

    Is there any way that I can add or edit my address book using the Desktop software? I would like to input email addresses and other information into my address book on my blackberry without having to type everything in on the blackberry. I was hoping there would be a way to do that on my PC and have it sync to my phone.

    he following steps will help you to configure synchronization -
    Connect your device using Desktop Manager and click on Synchronization
    From the menu on the left click Synchronization under Configuration
    Again click Synchronization button on the right which will give you option to Select Device Application that you want to synchronize
    Put the check mark and you'll get a prompt to Select Desktop Application
    Highlight the application name and click next button
    Under Synchronization Option you get Direction of Synchronization
    Check the radio button with Two way sync 
    Note: above mentioned steps are explained as per Desltop Manager 4.5
    Example: Synchronize addressbook -
    Connect you HH with your desktop Manager in your PC. If you device is set to wireless sync then you need to turn off wireless synchronization. To do so go to Address Book -> click Menu -> Options -> Wireless Synchronization: No -> click Menu and Save the changes.
    Click on the Synchronize button on Desktop Manager -> Click on Configuration Tab then click on Configure Synchronization -> Click on Choose under Address Book (on the right side of the pop up window) -> Click on you organizer apps (like, MS outlook, Lotus notes etc) -> Select desired apps -> select Synchronization radio button and click OK twice go back to Synchronize tab ->click on Synchronize Now.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Automatic file upload using desktop manager!!

    hi everyone! im new to this forum so dont knw how long it will take before people reply. lets give it a shot lol
    i just wanted to know if its possible to set up their blackberry manager in such a way that it automatically uploads files to to a computer once connected to a network?
    all sugestions will be much appreciated
    thanks,
    ricky

    You're welcome.
    Let's start with your device model, you've gotten to post that.
    But we gotta have some detail of what you're trying to do. In your first post and thread title you mentioned with using Desktop Manager, then you most recent post says without using any "middleman".
    You can use Bluetooth to transfer from the BlackBerry to the PC. You can use Desktop Manager for that, but not for document files like Word. You can use Media Manager for that transfer, but there's another middleman you don't want.
    Automatic? Maybe not. Even using a simple application on your PC like SyncToy will require some user interaction.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to use application managed entity manager in EJB?

    I finish reading The EntityManager Interface in JEE tutorial.
    I know I can use container manager entity manager in EJB, but I want to explore how to use application managed entity manager in EJB.
    Can I use application managed entity manager in EJB (container management JTA transaction is used)? Where do I should close entity manager if can?
    The following is an example from JEE tutorial, but didn't find where to calose entity manager. and can I create mutiple EntityManagerFactory objects and Entity Manager objects to use them in a JTA transaction?
    @PersistenceUnit
    EntityManagerFactory emf;
    EntityManager em;
    @Resource
    UserTransaction utx;
    em = emf.createEntityManager();
    try {
      utx.begin();
      em.persist(SomeEntity);
      em.merge(AnotherEntity);
      em.remove(ThirdEntity);
      utx.commit();
    } catch (Exception e) {
      utx.rollback();

    Seems like a very poor example, the whole power of EJBs is to use Container Managed Transactions so you don't NEED to manage the transaction and the entity manager yourself. What you posted is code I would expect in a non-JEE application, or in a piece of code which requires fine-tuned transaction boundaries such as batched data importing logic.
    If I were you I'd research JPA in steps.
    a) learn about JPA as an API outside of the scope of EJBs (recommended reading: the book 'Pro JPA 2')
    b) learn about Container Managed Transactions in EJBs
    c) learn about Bean Managed Transactions in EJBs
    Right now you're rushing into c). I can understand that it raises many question marks at this point.

  • How to use file manager to copy music to ipod?

    How to use file manager to copy music to ipod so can bypass iTunes?

    You can't.
    There are 3rd party apps that will load music onto your iPod.

  • E-mail issue after using Desktop Manager

    I am a new BB user (Curve 8530). So I am confused with this issue. Couple of days back I connected phone to my laptop and used desktop manager (ver 5.0.0.11). I just wanted to explore the features of DM. After I disconnected from laptop, the company account emails stopped coming to the handheld nor I could send any from the company mail-id from the phone. I have configured gmail and hotmail on the BB. These were operational perfectly. Only the official mail-id was not getting synched. And I started getting mails with etp.data files in my outlook. The company BB admin guys resolved the issue. So everything was fine. But no one could tell what was wrong. So today I again connected to the phone to DM cause I wanted to move contact from outlook to phone. Now again, i have the same issue. No official emails on my phone. I am sure the admin guys will again solve the issue. But I need to know why is this happening, else i won't be able to use DM at all. can some one explain as to why this could happening. should i check/change any setting on phone or DM.

    I am not sure this could help, but when you first intalled DM, did you onfigure it for Enterprise Use? Are you running 5.0.1 or 6.0? In the 5.0.1 version, you had to set it up for BES use when first installing the software.
    Also, validate with IT the email and other security policies they have in place for BES users...
    I know I am providing more questions than solutions, but hopefully they will steer you in the right way...

  • Can't sychronise BB8520 using Desktop Manager 5.0.1

    When I try to synchronise my Blackberry 8520 using Desktop Manager 5.0.1 I get the following message:
    "Your computer must be connected to the internet to perform this operation. Please ensure that you are able to connect to the internet and try again."
    Well, my computer is connected to the internet (I'm writing this aren't I?!).
    Any ideas as to what the problem is,anyone?
    Thanks in advance...

    Hi and Welcome to the Forums!
    This KB has information about that message -- hopefully it contains something useful for you.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Synchronize my Address Book using desktop Software Version 6.0 with the BlackBerry 8900

     Everytime I try to Synchronize my Address Book with the BlackBerry 89000 using desktop Software Version 6.0 it crashes. I try doing task and calendar they work just fine, just on the address book it seems to crash anyone else has this problem? Desktop 6.0 phone software 5.0

    Hiya!
     Please be a little more specific.
    What do you mean by crashes? Does your entire system shut down? do you get any error codes?
    Thanks!
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Update software without using Desktop Manager

    I'm trying to update my BB 8520 because it's been playing up (again) and I've tried using the desktop manger to update it but it doesn't seem to let me complete the update even though it says there is one. Is there anyway of updating it through the internet like a website or something, or does it have to be through the desktop manager? 
    Thanks. 

    See the link below for the download, and follow these simple installation instructions.
    First locate your carrier and the OS file you wish to use.
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to export Date book and Address book from Palm Desktop to Apple iCal and Address Book?

    I have my calendar information and addresses stored in Palm Desktop date book and address book, respectively. I am running Palm Desktop 4.2.1. Everytime I try to export the date book or address book to my desktop using the vCal format, the Palm desktop crashes. My goal is to export all my data from Palm Desktop to iCal and Address Book on the Apple OS (10.6.1). Does anyone have any advice as to how I can do this or do I just have to start from scratch and manually enter the data from Palm Desktop to Apple iCal and Address Book? I looked at the Missing Sync software, but I don't think this will do the trick. The Genius Bar at the Apple Store didn't offer any solutions either. Any advice would be greatly appreciated. Thanks.
    Post relates to: Palm V

    Hello tay8000m and welcome to the Palm forums.
     Have you tried running the "Repair Disk Permissions" command in Apple's Disk Utility application yet?  Launch Disk Utility, select "Macintosh HD" from the left side of the window, and then click the "Repair Disk Permissions" button.
     After the utility has run, try launching Palm Desktop again and then exporting your data as vCard or iCal files.  If the exports aren't working for you, you can always export the data as comma separated values (.csv) file and then import that into the Apple apps you want to use.
    Alan G

  • How do I manage duplicates in my address book

    How do I manage duplicates in my address book.
    I am using iOS 7 and iCloud

    Hi nacnud1234,
    If you are having issues with duplicates when using iCloud Contacts, you may find the following article helpful:
    iCloud: Resolving duplicate Contacts after setting up iCloud Contacts
    http://support.apple.com/kb/ts4147
    Regards,
    - Brenden

  • How can i synchronize mac address book and calendar to icloud

    how can i synchronize mac address book and calendar to iclod?

    What version of OSX do you have.

  • How to connect a Razr to iCal and Address Book w/ bluetooth

    How to connect a Razr to iCal and Address Book w/ bluetooth
    Hello. I am going to post this in multiple forums because I searched but couldn't find anything on how to sync my Razr with Tiger's iCal and Address Book so this is the How To.
    First, download the software Pacifist which can be found on www.versiontracker.com. After the download, put your Tiger DVD into the drive, open the packages in Pacifist, and do a search for iSync.app. Drag that app into your Applications folder. Go to www.versiontracker.com again, and download the iSync 2.1 update. Run that update, and after the restart, use the bluetooth setup to connect to your phone. After pairing, the bluetooth setup should say that you can sync your contacts and ical list. Go to your Applications folder and find iSync. Using this application, you can now adjust the settings for your iCal and Address Book apps.
    Good luck!

    Hi,
    There's a dedicated forum for Server customers.
    Good luck,
    S.

  • How can I do a Find & Replace in Address Book?

         I asked this question in a different forum & they suggested I post the same question here because someone might have an Apple Script?! 
    Here is the link:  https://discussions.apple.com/community/feeds/messages?thread=3187576 but to keep things simple, I want to find certain words and phrases in the note section of my address book and update those to something else.  How can I accomplish this?
    I have tried exporting and using numbers to make the changes but when I re-import those changes back to address book I get a huge mess of information.  Duplicate contacts and triplicate notes to say the least.  A suggestion was made to export ALL the information in the address book and then re-import it ( I was only exporting the names & notes previously ).  That poses new problems such as how to keep my custom categories in tacked.  Most of my contacts have things such as, 'John's Cell' and 'Susan's Work E-mail'.
    Thanks in Advance!
    R

    The basic idea is as follows:
    set keyWords to {"word 1", "word 2", "phrase 3"}
    repeat with thisWord in kewWords
              tell application "Address Book"
                        set p to (every person whose note contains thisWord)
      -- modify the text - depends on what you're trying to do
              end tell
    end repeat
    exactly what code you need to modify the text will depend on how you want to modify it, but the basic idea will be something like (using text item delimiters):
              tell application "Address Book"
                        set q to my tid(p's note, thisWord)
                        set p's note to my tid(q, replacementText)
              end tell
    on tid(input, delim)
              set {oldTID, my text item delimiters} to {my text item delimiters, delim}
              if class of input is list then
                        set output to input as text
              else
                        set output to text items of input
              end if
              set my text item delimiters to oldTID
              return output
    end tid

  • How to display the field "Country" in the Address Book UI ?

    How to display the field "Country" in the Address Book UI ?

    Using an add-on, MoreFunctionsForAddressBook gives you that opportunity.

Maybe you are looking for