How to use "DHCP Server"?

Hi,
I don't know how to use DHCP Server.
#Features > Networking > Network Management > DHCP Server
There seems to be no item to setting a DHCP Server in the Administrative Tools.
Is there function to which installation is necessary to use DHCP Server.
Thanks,

DHCP server role is typically for Windows Server, but you can get some DHCP capability when you enable Internet Connection Sharing -http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/make-windows-7-act-as-a-dhcp-server/8ff345f2-99b5-4670-bb6f-32d7bb63de3c
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

Similar Messages

How do I setup 'local' dns lookups for hostnames using DHCP server on WRT610N?

Said router with latest firmware has DHCP reservation setup with reserved clients names mapped to specific MAC addresses/IP addresses. I'd like my clients (a mixture of Mac and W7) to access mapped devices via hostnames and not IP addresses. I have static IP address provided by my ISP configured on the router with it's corresponding ISP DNS server addresses. FYI, the DHCP server DNS settings on the router are masked out (can't be changed) on the router and looks to be inherited from the Internet setup (in which I've entered the DNS IP addresses of my ISP's DNS).
On my clients, nslookup (or equivalent) clearly specify that the DHCP is pumping out the DNS servers from the ISP. Why would it not look for the reserved client hostnames first?
I know I can setup local /etc/hosts (or equivalents) or override the DNS and point to the router's IP address on the clients but I'd rather not - that's a lot of maintenance. I can also setup an internal DNS server, but again, overkill.
Is this feature available on this router or am I doing something wrong? An aging integrated Westell 327W DSL model/router used to be able to provide internal network DNS - but this more modern capable WRT610N router does not? Thoughts? Thanks.

Well its not possible to access the storage driver using the host name.. You can access the storage driver using only the IP address. As the Linksys Router doesn't work on a Host Name.

How to enable dhcp server on my mac

I am using OSX10.5 and I am wondering if there is some way to enable it to be a dhcp server for other devices on my home network?

Do you have a hardware router? If so the router handles DHCP serving. If you don't have a router but connect directly to a cable or DSL modem, then you can use Internet Sharing. Select Mac Help from the Finder's Help menu and search for "internet sharing" without quotes. You will find an article that tells you how to set that up on your computer.

Remote access VPN with ASA 5510 using DHCP server

Hi,
Can someone please share your knowledge to help me find why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
ASA Version 8.2(5)
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
ip local pool testpool 10.6.240.150-10.6.240.159 mask 255.255.248.0 !(worked with this)
route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface inside
crypto isakmp enable inside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
vpn-addr-assign aaa
vpn-addr-assign dhcp
group-policy testgroup internal
group-policy testgroup attributes
dhcp-network-scope 10.6.192.1
ipsec-udp enable
ipsec-udp-port 10000
username testlay password *********** encrypted
tunnel-group testgroup type remote-access
tunnel-group testgroup general-attributes
default-group-policy testgroup
dhcp-server 10.6.20.3
tunnel-group testgroup ipsec-attributes
pre-shared-key *****
I got following output when I test connect to ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDO
4024 bytesR copied in 3.41 0 secs (1341 by(tes/sec)13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ISA_KE payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received DPD VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode:        True Aggressive Mode: False
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received NAT-Traversal ver 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, Connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing IKE SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA Proposal # 1, Transform # 9 acceptable Matches global IKE entry # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ISAKMP SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for Responder...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Cisco Unity VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing xauth V6 VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Traversal VID ver 02 payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Fragmentation VID + extended capabilities payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
kens-mgmt-012# P = 10.15.200.108, Automatic NAT Detection Status:     Remote end is NOT behind a NAT device     This   end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing MODE_CFG Reply attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: IP Compression = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling Policy = Disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Setting = no-modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Bypass Local = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, User (testlay) authenticated.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg ACK attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=49ae1bb8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg Request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 net mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DNS server address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for WINS server address!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Received unsupported transaction mode attribute: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Save PW setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Default Domain Name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split Tunnel List!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Browser Proxy Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for backup ip-sec peer list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Smartcard Removal Disconnect Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Application Version!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Client Type: WinNT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DHCP hostname for DDNS is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=b04e830f) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE received response of type [] to a request from the IP address utility
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Cannot obtain an IP address for remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE TM V6 FSM error history (struct &0xd8030048) <state>, <event>: TM_DONE, EV_ERROR-->TM_BLD_REPLY, EV_IP_FAIL-->TM_BLD_REPLY, NullEvent-->TM_BLD_REPLY, EV_GET_IP-->TM_BLD_REPLY, EV_NEED_IP-->TM_WAIT_REQ, EV_PROC_MSG-->TM_WAIT_REQ, EV_HASH_OK-->TM_WAIT_REQ, NullEvent
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE AM Responder FSM error history (struct &0xd82b6740) <state>, <event>: AM_DONE, EV_ERROR-->AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL-->AM_TM_INIT_MODECFG_V6H, NullEvent-->AM_TM_INIT_MODECFG, EV_WAIT-->AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG-->AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK-->AM_TM_INIT_XAUTH_V6H, NullEvent-->AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b terminating: flags 0x0945c001, refcnt 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending delete/delete with reason message
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing IKE delete payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=9de30522) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
Regards,
Lay

For RADIUS you need a aaa-server-definition:
aaa-server NPS-RADIUS protocol radius
aaa-server NPS-RADIUS (inside) host 10.10.18.12
key *****
authentication-port 1812
accounting-port 1813
and tell your tunnel-group to ask that server:
tunnel-group VPN general-attributes
authentication-server-group NPS-RADIUS LOCAL
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

How to use Weblogic Server 6.1 build.xml with ant

Hi Java's
I have downloaded the latest version of BEA Weblogic server 6.1,they have changed the build.cmd to build.xml for compiling and building the ejb applications.they are telling that we have use $ant to run the build.xml but i couldn't able to do that.i'm getting "command not found error"..i'm using winnt.please help me how to use $ ant.Is it a seperate exe or batch file that i have to download ?if so where to download it.how to use it.please help.
Regards
Balaji

To use it after installation, set your path to your
<ant_installation_dir>\bin, then navigate to the diectory containing the build.xml. then follow the instructions in the weblogic documentation for running ant.

How to use VM server's disk space to store VM?

Hi!
I've installed Oracle VM Server on my Sun Server. The server has 4 hard drives, which are combined in RAID 10.
The final disk space is approximately 600 gigabytes. This is df command's output:
Filesystem
Size Used Avail Use% Mounted on
/dev/sda2
50G 1.2G   46G   3% /
tmpfs
666M     0 666M 0% /dev/shm
/dev/sda1
477M   47M 401M 11% /boot
none
666M   40K 666M   1% /var/lib/xenstored
For the needs of the server uses about 50 gigabytes of disk space.
Oracle VM server Installation and Upgrade Guide says:
Partitioning is performed automatically by the installer, and you do not have
the option to define how partitions should be created on the drive during the
installation process. Partitions are created in such a way that only the maximum
amount of disk space required to run Oracle VM Server is attributed to the
partition where it runs. A separate partition is created for any remaining disk
space to be used as a discoverable local disk that can be used to host a
repository or assigned to any virtual machine that runs on the Oracle VM Server.
So where is this separate partition, that I can use to server pool and storage repository in OVMM?
I want to use free disk space to share it using NFS. Later I use these NFS shares to create server pool and storage repository.
Thanks!
Konstantin

Hi Konstantin,
you should not use a OVS to export NFS shares to create a server pool or storage repo on it. Such shares should come from a dedicated NFS server, especially, if you plan on ever configuring a sever pool with multiple OVS. The point it, if you're using an OVS to act also as the NFS server for your server pool and storage repo, you will make it impossible to restart that one OVS, due to tha fact that you'd blow up your OVM cluster.
If you only want to run a single server pool, then nothing prevents you from usind fdisk on the OVS itself and claim the remaining drive space, by making it available as a /dev/sda3
Cheers,
budy

How to use SQl server 2005's SQLXMLBulkLoad with JAVA

Hi All,
I am in a big problem identifying how to use xml bulk insert functionality of sql server 2005 with java.
I need to enter millions of data into the sql server 2005 database.
All the material i saw on net includes vb script or asp.net sripts to do so.
Somebody please tell how I can do this with JAVA.
Thanks.

In this forum we commonly discuss connections from Oracle to foreign databases. When you want to connect with your SQL Server to Oracle it would be better to ask that in a Microsoft forum as they support their LINKED SERVER mechanism.
The linked server set up is for example described in the Microsoft knowledge base as:
280106 - HOW TO: Set Up and Troubleshoot a Linked Server to Oracle in SQL Server
In newer SQl Server releases the name changed see for example:
How to run a SQL Server 2005 Integration Services package as a SQL Server Agent job step
View products that this article applies to.
Article ID : 912911
As you can see they are commonly using OLEDB driver. So you might have to install Oracle's OLEDB driver as well. Else you might think about using OLEDB to ODBC bridge

How to use iCal Server with clients?

Ok, so since I can't find this anywhere... How do I use iCal Server with other desktop clients? I've selected the user, enabled calendaring, the user can authenticate in web-based group calendars. But then I'm stuck.
How do I give them their own calendar?
In iCal, I go to Accounts and try and enter the info but it fails every time. I tried the dns name like so: "calendar.example.edu" but it generates an error. But the user can log in to the web calendar for groups. Where is the users individual calendar located?
The help menu ignores that field as if it's not needed, but then it fails because the calendar doesn't know where the server is. The clients can't all be OD bound, so this has to work outside of Open Directory. According to Apple other CalDAV clients can connect too. How? Computers just don't "connect" on their own.
Anyone know the answer?

I was getting the same error when I tried to subscribe to a calendar using:
Subscribe to: http://myserver.example.com:8008/
principals/users/usershortname
I found that if I added a trailing slash to the URL then it would work :
Subscribe to: http://myserver.example.com:8008/
principals/users/usershortname/
(the way I found this was to navigate via the web browser to http://myserver.example.com:8008 then authenticate as a user, then navigating through to http://myserver.example.com:8008/principals/users/ where you can see all the user names all with a trailing slash after them)
hope this helps
Message was edited by: maximumjack

How to replace DHCP server from domainA with DHCP from domainB?

Hello fellow Administrators,
We have one remote site with one subnet. There's domainA domain controller and about 100 domainA's client computers in that subnet. We're about to send 100 domainB's client computers there as well.
There's also domainA's DHCP server running on the same subnet. DHCP scope options include domainA's domain name, gw and domainA's DNS server addresses.
DomainA and DomainB belongs to separate forests and there's two-way trust between them. DomainA DNS has stubzone for DomainB and DomainB has stubzone for domainA. That's how
clients can resolve hostnames of other domain.
All domainA's clients in remote site will be replaced gradually with domainB's client computers, but this can take a long time.
I want to note, that I cannot create second subnet for domainB at the moment.
At some point, we need to deploy DHCP server to domainB's member server in the remote site. What are the steps I should take to replace existing domainA's DHCP server with domainB's DHCP server while still allowing clients from domainA and domainB to successfully
find domain controller of their own domain and being able to resolve hostnames from both domains?

When the devices on your network first request an IP address or reach the end of their leases (or you force them to check their lease is still valid) they will simply
broadcast a request for a DHCP server, and will accept an offer from the first DHCP server
to reply.
Multiple DHCP servers PT 1: Spanning multiple subnets.
If you have several VLANs or physical network segments that are separated into different subnets, and you want to provide a DHCP service to devices in all those subnets then there are two ways of doing this.
If the router / layer 3 switch separating them can act as a BOOTP/DHCP relay agent, then you can continue to keep all your DHCP server(s) in one or two central parts of your network and configure your DHCP server(s) to support multiple ranges of addresses.
In order to support this, your router or layer 3 switch must support the BOOTP relay agent specification covered in section
4 of RFC 1542.
If your router does not support RFC 1542 BOOTP relay agents, or if some of your network segments are geographically dispersed over slow links, then you will need to place one or more DHCP server in each subnet. This ‘local’ DHCP server will only serve its own
local segment’s requirements, and there is no interaction between it and other DHCP servers. If this is what you want then you can simply configure each DHCP server as a standalone server, with the details of the address pool for its own subnet, and not worry
about any other DHCP servers on other parts of the network. This is the most basic example of having more than one DHCP server on the same network.
http://www.arabitpro.com

How to change DHCP server

Hi,
Current DHCP svr (10.10.232.66), I have installed a new DHCP svr (10.10.232.71)
I don't want to turn off current server and run both in parallel in order to make sure new svr work properly.
So can I force some client to get IP from new svr ?? current svr assign 10.10.232.2-99 / new svr assign 10.10.100-200
If test completed, I will use new svr to replace whole DHCP service on current svr.
Thanks

Hi,
In general, you can run “ipconfig/release” and “ipconfig/renew” commands to force a DHCP client
to obtain a new IP address. However, since you have two DHCP servers in the same subnet,
clients can be leased at either server. Actual leases distributed to clients can depend on which server responds first to any given client. The clients can obtain
IP addresses all from the new DHCP server only if the current server is unavailable.
Besides, you can choose to reserve some IP addresses in the new DHCP server for permanent lease assignment
to specified clients. Or you can use the 80/20 rule to set the new DHCP server with 80 percent of the addresses distributed and the remaining 20 percent provided by the current DHCP server. In these scenario, the new DHCP server responds to requests from DHCP
clients most of the time and the current DHCP server assigns addresses to clients when the new DHCP server is not available or is out of addresses.
The links below may be helpful:
DHCP Best Practices
Best regards,
Susie

How to use DNS server for name resolution for items which don't exist in active directory domain controller DNS

Dear Experts,
In our office we have a domain controller call it 'Office.com', all computers and corporate servers e.g. exchange, antivirus etc. are member of this 'office.com', it is also having a DNS. All users in office have there preferred DNS set to the corporate
DNS
We are working for ministry and offering services to them from our data center so have many servers which are for ministry but they are in our data center. For all these servers we created another DNS server which contains all entries for these servers in
forward and reverse lookup zones. In this DNS we also created a forward lookup zone for our corporate servers and zone name is 'office.com'
What we are trying to have is name resolution of all servers which are listed in other DNS build in our office on Win 2008 R2 for ministry servers
If the user change his preferred DNS to ministry DNS he can resolve the ministry server but then we can not control any thing through group policy since they are using other DNS and not the corporate DNS.
How this can be done ? like any group policy applied to corporate domain controller must take effect on users and in addition to this user must also be able to resolve server names in ministry project DNS
Please assist ASAP.
regards,

Hello,
ok so the GPO setting doesn't apply in any case.
Clients machines use the first DNS server in the list of configured ones on the NIC. If that one is available search for additional DNS servers will stop.
What i can not really understand is your description about the second DNS server. This should normally either another DC with AD integrated DNS, so everything is replicatedwithin AD replication or you use a secondary DNS on domain member server that pulls
the informations from the Master.
It sounds for me that you have configured a machine with DNS server role and created manually the zone with the same name as the domainand manually create there the required A records?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

How to use Access Server SDK

Hi All,
Can someone please brief me how we can use the Access Server SDK and purpose of it

Its an SDK to impement you own custom Access Gate.
Typically OAM is used to protect Web applications but if you want to protect a Windows Client server application / Microsoft Smart Client type of applications, you can write Custom Access Gate and protect the resource.
the Advantage of OAM is to define resources and policieis in one central place and enforce those policies. You can leverage Access Server SDK to implement custom access gate.
its also used in directly if you have both OAM and OWSM.
I have used it to protect Smart client applications ( Microsoft client server app) , Web Services that are called from a Web Application which is protected by OAM ( passing the same cookie in the header and validating the privileges)
Thanks
Ram
www.identris.com

FMS 3.5 - How to use remoting Server Side

I am very interested in using Remoting in order to connect to a Drupal AMFPHP service module. On the client side this is easily done and I have had limited success on the Server side, but a good guide on how to do this properly and be able to get the data being returned would be great.
Thanks,
Chris
ChrisMcIntoshDesigns.com

I don't know if Drupal's AMFPHP implementation is any different than a straight install of AMFPHP, but this article should help to get you started:
http://www.sephiroth.it/tutorials/flashPHP/flashcomm_AMFPHP/index.php

How to use LPD server with CUPS

Hello,
could you help me please, how to add support of cups-lpd? Some info is here: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man8/cups-lpd.8.html. I know how to add this to linux but not to OS X. I was trying to connect to MAC with LPD protocol, but I was not successful (but with IPP was everything OK - CUPS doesn't support LPD server defaultly), so it should help me. Thank you for your advices!

Looking through the CUPS documentation, I can only find reference to using IPP on the client to connect to shared printer on the Mac. There is no mention of being able to use LPD on the client and in testing this morning I can confirm that LPD is not supported.

Looking for a tutorial on how to use VI Server

Hello. Can anyone link me to a tutorial or article that covers the usage of VI Server across machines on the same network?
Also, can VI Server functionality be used inside executables created by developers suite w/o any running LabVIEW instances?

The VI server allows you to programmatically access and control VIs running in any LabVIEW instance. That instance can be the current one, another one on the same computer, on a different computer around the world or even on an RT target and working with them is the same in all cases.
It starts with calling Open App Reference, which recieves a computer name (or IP address) and a TCP port number. These determine the specific LabVIEW instance and from that point on you work on that instance using the reference you got from the function. See a simple example of connecting to a remote VI here. The same works with property and invoke nodes.
You should note that not all properties and methods work on remote instances. Each has a table in the online help with one of the lines being Available on Local LabVIEW Only. If this is true, it means that you can not use that property in a remote instance.
Try to take over the world!

How to use "DHCP Server"?

Similar Messages

Maybe you are looking for