How to use different domains in SharePoint

Hi
i am having a SP 2010 environment with a single domain now i need to add multiple domain to this same environment how is it done
Alen Austin

Hi,
is it possible to add other domain user without creating trust between domain. we can not create trust domain relationship between 2 domain.
i have some different requirement. i have 2 domain domainA and domainB. domainA is being used for user authentication, farm join this domain and did all installation and configuration.
same user id is being created on both domain.
domainB contain user email address and all user profile hierarchy like manager. department, team and so on.
pls tell how do i get user profile details from domainB.
thanks.
iffi

Similar Messages

Is possible to site mailbox email address with different domains in sharepoint online - office 365

Can I set site mailbox email address with different domains in sharepoint online - office 365?
For eg I have two dns link with office 365 account - abc.com, xyz.com
So can i set site mailbox email according using powershell like follwoing
New-SiteMailbox –DisplayName "test" -Name "[email protected]" –SharePointUrl $NewlyCreatedsiteurl
New-SiteMailbox –DisplayName "test" -Name "[email protected]" –SharePointUrl $NewlyCreatedsiteurl

Hi Biraj,
From your description, you would like site mailbox to have two email address.
Since the issue is related to SharePoint online and Exchange online, I'd recommend you contact online support engineer for sufficient resource and more assistance. For your convenience:
http://community.office365.com/en-us/f/154.aspx
In addition, I find some information that might be relevant for your reference:
Quotes from
https://support.office.com/en-sg/article/Prepare-for-using-site-mailboxes-in-Office-365-6381daa5-3d98-4629-972d-d19e1dc48c1b
Can I rename a site mailbox?
The display name of a site mailbox is the SharePoint team site display name. If you change the display name of the site in SharePoint, the display name also changes in Outlook. However, the site email address won’t be changed.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to use different page scapes in smartforms

hi
How to use different page scapes in smartforms.
I want Potrait format in the 1st page and Lanscape format in 2nd page is it possible if so plz suggest me an idea

Hi,
It is possible in smart forms, but not in scripts.
we can have 3 tabbed options for pages in smart forms.
General...
Output options
Conditions.
In output options u can define whether a page can portrait or land scape in print attributes.
Reward if helpful.
Regards,
Sandhya

I want to know how to use my domain name in business catalyst

please I want to know how to use my domain name in business catalyst

Hello marionussen,
This issue of your's is specific to Buisness Catalyst and me have a forum for Buisness Catalyst. I would suggest you to post your query to forum: http://forums.adobe.com/community/business_catalyst for help.
Let me know for any further query.
Regards,
Ratandeep Arora

How to use STSADM commands in sharepoint 2007

How to use STSADM commands in sharepoint 2007

Hi,
There is no such STSADM commands to get the user groups. There are two separate STSADM commands get either users or groups for particular site.
STSADM -o enumusers <<url>>
STSADM -o enumgroups <url>
For complete reference, please refer to the following article.
http://blogs.technet.com/b/josebda/archive/2008/03/15/complete-reference-of-all-stsadm-operations-with-parameters-in-moss-2007-sp1.aspx
One such console application available to get the user groups. Please refer to the below article.
List all SharePoint groups a user belongs to
Please don't forget to mark it as answered, if your problem resolved or helpful.

How to create different Graphs in SharePoint 2013 without using Excel service?

Hi All,
I want to create different graphs in SharePoint without using Excel Service.
I do not want to create excel and then upload that to SharePoint.
Any one knows how to do that? Isthere any option to do that?
Thanks in Advance

Hi Darsh,
You can use
SharePoint chart webpart to display charts. Or you can use any jQuery charting library and feed data using JSOM or REST. Ex. high charts:
http://www.highcharts.com/products/highcharts
http://office.microsoft.com/en-us/sharepoint-server-help/sharepoint-lists-vi-exciting-ways-to-display-your-list-data-RZ102425636.aspx?section=3
Best Regards,
Brij K

How to use Different Main Windows in Multiple pages to print internal table

Hi experts,
I have a problem regarding how to have multiple different main windows in smartforms..the problem is that i want to print an internal table in the third page of the smartform and that table can have dynamic values ..sometime it may have more than 400 values also which can not be printed in one or two pages ...
so to accomplish the same what i did was..
i tried creating a new main window in the third page but it is throwing an error saying two main windows not allowed and i also tried by copying the first page's main window but it is just repeating the same content what was there in second page..
i also tried by creating a secondary window in the third page and in that window i tried giving my internal table and tried by giving the next page to itself but that also is not allowed and it throws an error saying a page without a main window cannot point to itself as a next page....
i also tried using a secondary window and in that window i was trying to display the internal table but it is only showing third page content and fourth page itself was not created....although in my next page field value of the third page , i have given the third page itself as a next page ....but this also is not working ,.....
please suggest how to have different main windows(not copy of first main window) in smartforms in order to display the dynamic contents of an internal table

HI ,
Just check with your smart styles with assigned paragraph allignment .
Try to create character style with your required font ,size and Allignment .
Hope u this will solve your issue .
Let me know if any concerns......
Regards,
Lokesh

How to use different xsl's for user first time logon in OAM

Hi,
We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
Any pointers on this is appreciated.
Thanks in advance..
Srikanth

XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
You can do this in various locations -> from the web server, from the url, custom plugins, etc....
-Raj

How to use different (not local) user for NTLM auth in Authenticator?

Hi All,
I use custom authenticator to provide user / passwords to connect to .NET Web Services. I overloaded function getPasswordAuthentication() that returns right user / password combination for the requested URL. It all works perfectly for many kinds of HTTP connections: basic, ntlm, ntlm-v2, through proxy, ssl, etc.
My problem is that during NTLM authentication from Windows computers JVM uses credentials of the currently logged in domain user instead of calling Authenticator to get other user / password provided by the user. In case when local user credentials fail to authenticate, JVM calls my Authenticator but in case authentication is successful it does uses local domain user and never calls my Authenticator. The issue is when this local domain user does not have enough permissions but authenticated correctly there is no way to supply JVM with another user to begin with.
What can I do to force JVM to ignore local domain user and to use Authenticator to collect credentials during NTLM authentication requested by the server in case the software runs on a Windows box with currently logged in domain user?
I am looking for the answer for a long time already but found only questions and suggestions to switch server from NTLM authentication which is not an option for me. From the developer's view it has to be pretty simple change for Sun to do in Java networking API. Is there any way to escalate it to Sun support? Maybe there is some property in some JRE patch level that allows to do this?
Thank you very much!
Mark

Thank you for the reply. I have kind of an opposite problem. I can perfectly connect from Linux computers to Microsoft IIS servers using NTLM or even NTLMv2 authentication. My problem is connecting from Windows client computer joined to the same domain as IIS server with the domain user logged in to this computer. In this case this user account will be used in any HTTP connections I initiate to this IIS server instead of the one that I want to supply in my custom Authenticator.
I have graphical interactive application that connects to IIS Server. When user runs it and connects to IIS server I want to prompt for the user/password regardless whether JRE may correctly authenticate using current user account credentials. The current user may not have enough permissions in IIS application so I want to use different user to login to IIS application.
Thank you anyway,
Mark

How to use different Vlans outside another gateway in sg-300 28?

dear all
how shall i use different vlans outside another gateway in sg-300 28?
Example:
vlan2 192.168.2.0/24 gateway 192.168.2.1 outside router gateway 192.168.2.254
vlan3 192.168.3.0/24 gateway 192.168.3.1 outside router gateway 192.168.3.254
should me doing in sg-300 28?
thanks.

Hi Amin,
Leave the switch in Layer 2 mode
Cable VLAN2 to the to the outside router gateway 192.168.2.254 interface
cable VLAN3 to the to the outside router gateway 192.168.3.254 interface
Excuse the rough diagram
Make the port going to the outside router gateway, untagged in the vlans they will be transporting. (I am assuming that the router gateway is not vlan aware.)
IP hosts will most likely get DHCP from the router gateway. The IP hosts will then automatically send IP traffic to the router gateway.
VLAN 1 in my switch, could then be the only interface within the switch that has a IP address associated with it, for management purposes.
I can see from you post, that English is not your first language, if you want to speak to someone, you can ask a question by going to;
www.cisco.com/go/sbsc
regards Dave

How to use different stylesheets for ChangeAttributeRequest workflow in OAM

Hi,
We have a requirement to invoke different change attribute request workflows (change password ,change email etc..) from external JSPs..
I want to apply different stylesheets for each workflow. In the workflow URL if i enter style=stylesheet-name its not using that stylesheet. Always its using the same base stylesheet (wf_changeattr.xsl). How can i use different stylesheets? Any pointers on this is appreciated.
Thanks inadvance..
Regards,
Srikanth

Hi Colin,
Thanks for your response. Now i am able to invoke different xsls for different workflows.
I did a mistake by entering style=stylesheet-name. I verified the same with xsl=stylesheet-name.
Its working fine now..
Thanks & Regards,
Srikanth

How to Use different icons for JTree in the same level

Hi guys, i come cross a problem with JTree. The module need a JTree which need to represent items in the same level using different icons. For example:
[Icon for Root]Root
|
|_____________[Icon for Table] TABLES
|
|_____________[Icon for Index] INDEXS
|
|_____________[Icon for Views] VIEWS
As i know, the default behavior for JTree is using the same icon for all leaves and
the same icon for all node that has children. How can i achieve that?
Thansk a lot!

subclass DefaultTreeCellRenderer. if you overwrite the method below, then you can set the icon to whatever you want....!
    public Component getTreeCellRendererComponent(JTree tree, Object value,
                                boolean sel,
                                boolean expanded,
                                boolean leaf, int row,
                                boolean hasFocus) {
     String         stringValue = tree.convertValueToText(value, sel,
                           expanded, leaf, row, hasFocus);
        this.tree = tree;
     this.hasFocus = hasFocus;
     setText(stringValue);
     if(sel)
         setForeground(getTextSelectionColor());
     else
         setForeground(getTextNonSelectionColor());
     // There needs to be a way to specify disabled icons.
     if (!tree.isEnabled()) {
         setEnabled(false);
         if (leaf) {
          setDisabledIcon(getLeafIcon());
         } else if (expanded) {
          setDisabledIcon(getOpenIcon());
         } else {
          setDisabledIcon(getClosedIcon());
     else {
         setEnabled(true);
         if (leaf) {
          setIcon(getLeafIcon());
         } else if (expanded) {
          setIcon(getOpenIcon());
         } else {
          setIcon(getClosedIcon());
        setComponentOrientation(tree.getComponentOrientation());
     selected = sel;
     return this;
    }

How to use differing 'My Info' on iPhone/iPad

Hi everyone,
I am using an iPhone and my wife an iPad. Both devices are set up using the same Apple ID in order to easily share App Store purchases and for iCloud as well. In Settings.app under Mail, Contacts, Calendars you can tell the device who you are by selecting your contact info under My Info. So I did select mine on the iPhone and my wife’s contact on the iPad. So far so good. But sometimes, and I haven’t quite found out how and why, this Info automatically changes!
It is always the last edited setting which propagates to the other device. So for example, if I set my info on the iPhone and afterwards my wife’s on the iPad I well end up with her info on my iPhone as well. It happens the other way around, too. I haven’t yet figured out how this happens. So it could be over the air or while syncing via USB which I sometimes do for faster device backups. It could also happen when using a specific app or service.
Maybe someone can shed some light on this? I’m sure that I could just use separate Apple IDs on both devices, but I’d rather not. Everything works and is easier to handle. Even FaceTime and iMessage support different Caller IDs when using the same Apple ID. So it’s only this little thing that’s left…
Thanks and hoping for a solution
Björn

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

How to use Different Calendars in one DP Planning Area

Hi Experts,
I would like to know that whether it is possible to use different calendars in single planning area ? Will explain the scenario in details as under
We have 3 plants having separate calendars (different weekly offs). Now using single planning area in DP, I have to plan the demand for all the 3 plants in weekly buckets.So I need to refer to 3 different calendars in single planning area. Is this possible in DP ? As far as I know, we can attach only one fiscal year variant to the planning area through storage bucket profile. Also in this case, the system do not refer to public holiday calendar there by assuming all day working except the weekly off.
Thanks in advance
Regards
Sandeep

Thanks Sujay for immediate reply. The time bucket profile will just help me see the data in different buckets say Daily, weekly or monthly. However this still doesn't solve my problem. As only 1 Fiscal Year Variant is attached to the storage bucket profile, the system still will read the same profile for all the plants & will assume the same weekly off for all the plants which is not true in reality.
Any other suggestion for considering different weekly offs for different plants in the same planning area ?
Thanks & Regards
Sandeep

HLOC Chart: How to use different stroke for different items in a HLOCSeries?

I want to use different color for the stroke in a HLOC chart based on the openfield, closefiled value.
It's just like the fillFunction in a ColumnSeries.
Anybody got any ideas to make this?
And I would also like to know which class is responsible for the drawing of charts? So that I can alter it and develop one that suits my needs.
Thanks very much!

Natasha, thanks!
I need to override the updateDisplayList function in HLOCItemRenderer to make it draw what I want.

How to use different domains in SharePoint

Similar Messages

Maybe you are looking for