How to use disk utility to repair an encrypted disk partition

I have run the Disk Utility verify function against my system partition.  It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.
Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.  I think this could be because the partition is encrypted.  The utility does not offer me the chance to unlock the partition with my passphrase.
How can I repair the filesystem errors on this partition?

Yes...
Actually I gave it another try.  I discovered that by right-clicking on the partition it prompted me to unlock the volume.  After entering my password I was able to run the repair.
All solved...!  Thanks for visiting my Q all the same.

Similar Messages

  • Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

    Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
    Sequence of events:
    The main error message is always:
    An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
    Yesterday, I opened Disk Utility and verified the disk. Got this error:
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
    Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 145601 files (11.88 GB) needing backup
    16.1 GB required (including padding), 620.77 GB available
    Copied Zero KB of 11.88 GB, 0 of 145601 items
    Copied 0 files (Zero KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
    Ejected Time Machine network volume.
    Starting automatic backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
    Does anyone know what the problem is here and what I should do?
    Thanks,
    Tery

    You have repaired your boot drive (which is good) but have you repaired your time machine drive?  I don't own a Time Capsule so I don't know if disk utility can operate on it.  If it can, you should repair it as well.  You may need to erase it and start a new backup.  That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

  • Can anyone help me?Time Machine couldn't complete the backup to...  An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk.  What is the problem?  I've made no changes.

    I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files.  The problem may be temporary.  If the problem persists, use Disk Utility to repair your backup disk.  I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently.  I've made no major changes.  I've ran a diagnosis on my back up drive with no problems.  The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message.  I can see the shared drive in Finder.  The light on the drive blinks while it starts the back up.  I can see the shared folders on the networked drive.  The backup process starts but for some reason it just stops.  Can anyone help?

    You can't repair a network volume in Disk Utility.
    Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
    If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

  • Time Machine Error: "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
    "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
    Anyone out there who might be able to help me fix this?

    I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
    "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
    Anyone out there who might be able to help me fix this?

  • HT3275 "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."

    The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.
    what does this mean?? why can't i backup before i have to get my hard drive replaced?!!? arghh

    brahr3 wrote:
    I am getting the same error message: "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk." I don't have a TC but rather an external drive, which is twice the size of my harddisc, and it still has plenty of free space. The problem has lasted for 5 days. I even used a different external drive -- still same error message. Needless to say that I have run Disc Utility several times. Can anybody help? Thanks
    I am having issues with some USB drives on Mountain Lion.. work perfectly on another computer with Snow Leopard.. not even recognised by ML.
    Is the disk recognised?
    If so and TM cannot pick it up.. do a full reset of TM and try again.
    A4 http://pondini.org/TM/Troubleshooting.html

  • HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

  • I keep getting this message: "The back up was not performed because an error occurred while copying files to the backup disk. The problem may be tempory. Try again later to back up.  If the problem persists, use Disk Utility to repair your backup disk."

    I've repeatedly "tried again" over the past month with no luck.  I'd rather not delete everything if that's what "repairing" the back disk involves. 

    On a time capsule the error message is meaningless. That would only apply to an external drive...TC is a network drive.
    I recommend you just reboot the whole network.. from off..
    Restart in order.. modem.. TC.. clients. Wait 2 min between each one.
    If the disk still won't mount give us more info..
    Are you using wireless or ethernet?
    How is the TC configured?
    What sort of internet?

  • The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk. Have tried disk utility to repair but still not working.

    My time machine backup has failed for the last couple of days. Im getting the message saying," error.  this may be temporary, if the problem persists, go to disc utility to repair the problem."
    I have done the first aid in the disc utility  and still not repaired. Do I erase the disc, as it says????

    1. Reboot the TC alone.. Just pull out the power cord.. count to 10 and plug it back in.
    If TM still cannot find the disk..
    2. Do a full network reboot.. everything off.. restart in correct order.. modem.. wait 2min.. TC wait 2min.. then all the clients..
    If TM still cannot find the disk..
    3. Factory reset the TC and do a fresh configuration. The TC is known to occasionally throw a wobbly and spontaneously forget its name.. part of old age.. (2years is starting towards old age for a TC).
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    If TM still cannot find the disk..
    4. Wipe the old backup.. and start afresh.. this sometimes also happens.
    You can try a verify of the disk. See A5 here.
    http://pondini.org/TM/Troubleshooting.html
    Sometimes a clean fresh TM backup is the only way.
    Good luck.

  • Disk Utility fails to create encrypted disk image

    When creating a disk image using 256 bit encryption and a purely numeric password longer than 13 characters the following message appears:
    Unable to create "ABC.dmg." (error -60008)
    the error happens upon typing the 14th consecutive number into the Password field. I have created images under the same conditions in the past, Not sure if this is caused by Lion.

    Looks like one of the drives is bad.
    While it passed being zeored with Disk Utility, it failed about 15 minutes into a 'Certify' using SoftRAID.
    Now waiting on a replacement drive from Newegg.

  • HT3275 My Time Machine Error persists even after changing from ex HDD to a new 3G Time Cap and using DU: "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    Thanks for your thoughts on this!

    Thanks for this Pondini!  I swapped back to my original 2TB back up from the new 3TB Time Cap with still no luck. It last succesfully backed up 16th June 2012 but has failed since then.  I'm getting multiple error -36's from the same folder ...Backup/599c... but involving different files eg .../02f... and .../03e... etc.  This is going to be a nightmare to exclude them all one at a time.  Can I just exclude the entire ...Backup/599c... folder?
    Dimitri.
    Aug  3 08:11:08 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/02f517f9d3de 637c63fad6447558fcea3f289734 to (null)
    Aug  3 08:12:08 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/03e718ec4f0e fa74179f2ddf4f690a397c7bfd83 to (null)
    Aug  3 08:12:47 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/0f4105650705 e06d625f3216693c054c7ab1bdba to (null)
    Aug  3 08:13:03 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/0f4f0381dc35 0a7b4911f13939631e8d19c9d3d6 to (null)
    Aug  3 08:13:37 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/114ae1ea6eda e56b90384d0fdb63290c0ca336c7 to (null)
    Aug  3 08:14:43 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/13e1187ef5a4 98ee59bd3a1ec80e0e148cd995fb to (null)
    Aug  3 08:15:17 cathy-hatchs-imac.local com.apple.backupd[23752]: Error: (-36) SrcErr:YES Copying /Users/DIMITRI/Library/Application Support/MobileSync/Backup/599c5ea5c84fd845b43fab22ce6d0dba3246b5df/180a9f76a50f f281515a50a5d89e3de044954ce3 to (null)

  • Every time I restart my computer, I need to run disk utility to repair my startup disk.

    Usually it corrects volume file counts, volume directory counts, and free block counts. Fortunately, I can use the Lion recovery volume, but it is starting to get annoying, and I am worried about my data. How do I fix this?

    How are you putting away your computer when you are done using it?

  • After using Disk Utility's Repair Disk Permissions, can't login when restart my macbook pro10.6.8 Snow Leopard

    Here's the log of my Macbook Pro, as I'm using a chinese version,
    so log can only appear as below.
    Reason I try to use Disk Utility's Repair is because the finder got not respond so ofter, it happen after my unscuessful power loss issues happen at home, before I doing Disk Utility's Repair I have try to build another admin account and guest user to reslove the ifnder not respond problem and it fix......
    I'm sure problem was cause after using Disk Utility's Repair tool..
    Now I can turn on by using Safy mode, just can't plugin USB =(
    Anyone can help for solving, thanks a lot
    Disk Utility's Repair log
    磁碟工具程式 as Disk Utility's Repair
    2011-05-28 14:58:27 +1000: “磁碟工具程式”已啟動。
    2011-05-28 14:58:45 +1000: “磁碟工具程式”已啟動。
    2011-06-08 04:45:07 +1000: “磁碟工具程式”已啟動。
    2011-07-07 01:21:13 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:12:15 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:12:34 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:13:02 +1000: 正在修復“Macintosh HD”的權限
    2012-07-18 17:13:10 +1000: “Library”上的權限不同，應該為 drwxrwxr-t ，它們為 drwxrwxr-x 。
    2012-07-18 17:13:10 +1000: 已修復“Library”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
    2012-07-18 17:14:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應 該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”。
    2012-07-18 17:15:02 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib” 。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib” 。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限 不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限 不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”。
    2012-07-18 17:15:44 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:44 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的 權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib ”。
    2012-07-18 17:17:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:17:06 +1000: 警告：SUID 檔“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent”已修改，且將不會進行修復。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib” 。
    2012-07-18 17:17:12 +1000: “System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib”上的 權限不同，應該為 lrwxrwxrwx ，它們為 lrwxr-xr-x 。
    2012-07-18 17:17:12 +1000: 已修復“System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib ”。
    2012-07-18 17:17:47 +1000: “usr/libexec/cups/backend/fax”上的權限不同，應該為 lrwx------ ，它們為 lrwxr-xr-x 。
    2012-07-18 17:17:47 +1000: 已修復“usr/libexec/cups/backend/fax”。
    2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
    2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls”。
    2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls/ALRHelperJobs”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
    2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls/ALRHelperJobs”。
    2012-07-18 17:18:12 +1000:
    2012-07-18 17:18:12 +1000: 權限修復完成
    2012-07-18 17:18:12 +1000:
    2012-07-18 17:18:13 +1000:
    2012-07-18 22:19:33 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:21:36 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:22:34 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:22:47 +1000: 正在製作映像檔“Macintosh HD.dmg”
    2012-07-18 22:22:55 +1000:     正在準備用來製作映像檔的引擎⋯
    2012-07-18 22:23:03 +1000:     正在讀取整個磁碟 (Apple_HFS : 0)⋯

    I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
    FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
    Thanks,
    Chris

  • DISK UTILITY STOPPED REPAIRING MACINTOSH HD!

    So initially, my mac just was stuck on the white screen with grey apple logo and the spinning wheel. It wouldn't move! So I held down the power button and turned it off, let it rest for good 8 hours, turned it back on and it was still the same! With the help of some online postings: command + control + p + r, I got to the Disk Utility page and I tried checking for any damage. For most part everything was"ok" or "clear"! Then I ran 'VERIFY DISK' for MACINTOSH HD and some problems occurred. I clicked on 'REPAIR DISK' as promted. It said "DISK UTILITY STOPPED REPAIRING MACINTOSH HD: Disk Utitlity can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    I HAVE ABSOLUTELY NO IDEA HOW TO DO THAT ! I have not backed up a single thing on my mac!

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Disk Utility Cant Repair my OS X Drive

    Hello There,
    I Had A Problem With my OS X Basic 3TB Hard Drive. It Has Two Partition 1tb Is My OS X drive And 2tb Is For My Data. When I Start Up My I Mac It Gives Me A Loading Sign After That When It Completes My I Mac Shutdown. I Goto Power on By CMD+R And Select Disk Utility To Repair My Drive. There My OS X Drive Is Disable And My Data Drive Is Mounted And Working. I Click On Repair By Selecting My OS X Drive But It Give Me A Dialogue That "DISK UTILITY STOPPED REPAIRING MACINTOSH HD" (Disk Utility Can't Repair This Disk. Backup As Many Of Your Files As Possible, Reformat the disk, And Restore Your Backed Up Files.)
    Excuse Me... Mr. Computer I Need My Important Files In This Partition, So How Can I Reformat This
    Please Help Me Is There Is Any Way To Repair My Disk.. Please Please Please....
    I Am Using I Mac 27 Inch With Mavericks 10.9.3

    Why, why, why would you initial-cap every word in your post?
    Do you have a backup?
    Do you have an external hard drive? You should have an external HD with an operating system and some repair utilities installed on it, for backing up your internal drive and for situations like this. Disk Warrior may be able to help if the problem with your system partition is directory damage. Another app to have on hand is Data Rescue 3.

  • Disk Utility not recognizing Time Capsule Disk?

    Hi I'm receiving the following error message from Time Machine:
    "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
    I am able to access the Time Capsule's hard drive via Finder, and can see the sparsebundles there, but when opening Disk Utility the Time Capsule does not appear on the left sidebar along with other hard drives (such as that of the iMac and an external USB drive).
    I've gone through restore and factory resets, this message continues to come up...any suggestions?
    thanks

    disk utility can only repair directly attached drives. it can not work on network drives like Time Capsule. but you can try repairing the sparse bundle itself. drag it to disk utility's left pane, select it there and choose "repair disk".

Maybe you are looking for

  • Hp 8560w booting into black screen, seems to be booting without display

    Hi, Ive got this elitebook 8650w from a friend who asked me to help him try to get it to run. First thing noticable that something was wrong with this machine  is when it started shutting down/rebooting randomly,  i suspected overheating since it had

  • Executing procedures concurrently

    Hello All, I am trying to execute the following procedure and got the errors...can anybody please help me out 1 CREATE OR REPLACE PACKAGE BODY SCOTT.PKG_TRY_PAR IS 2 PROCEDURE try_par(num1 IN NUMBER, num2 IN NUMBER) is 3 begin 4 for i in num1..num2 l

  • Where to modify anonymous login channel?

    Hi, Q1. I know we can modify the anonymous login channel as I manage to do it for all the others but for the login, I can;t seem to find the Login folder as mentioned in the docs. i am using portal 6.2 (JES 2004Q2). Also the doc says not to modify Lo

  • Smartform how to determine the language of apurchase order.

    Hi, Maybe a simple question. But i cannot find it in my form because it isn't used in it so far. A purchase order must be printed in the language of the receiver of the purchase (vendor). Which variable is used to detemine in which language these for

  • Call procedure across schema

    I have oracle 8i i have multiple identical schema for different country. i write one procedure in one schema(country_1) and granted to all others for execute. now i am connected to country_2 which doesn't have procedure, and i am calling procedure of