How to use documents created from software on bootcamp, on my MBP at the same time?

I have a MBP. Bootcamp was installed. VM Fusion also installed. Two industry unique software programs, one that plots legal descriptions in deeds and one that creates forms have been installed on the bootcamp side and I can acces them through VM Fusion, but when I receive documents in "ndp" format in an email I can't direct it to the application in bootcamp or on the windows side in order to open it. Any suggestions? Also, the forms program creates documents but I'd like to save them somewhere where I can access them from the Mac side. I'm new to this. I could use some help.
Thanks.

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

Similar Messages

How to delete photo's from both Iphoto and source (external HD) at the same time

I've seen a few postings on this but none seem to answer the quetion. Sorry if this is a duplicate and I coudn't find the answer.
I have an external HD with over 4GB of pictures in various folders and subfolders. I would like to import one folder at a time and go through the photo's using iPhoto to choose which ones I want to keep and which ones I don't. If I come accross a picture I don't like I would like to delete it in iPhoto and at the same time have it deleted from my external HD. I have tried the following with no success:
1. Import photo's to iPhone and delete photo's I don't want. I did this in the photo's view, not events or albums.
2. After deleting the photo's I empited the iPhoto recyling bin which then sends the photo's to my Macbook pro recycle bin
3. I then emptied the macbook pro recyle bin.
From what I've read this is how you're supposed to be able to delete photo's permantently form you HD or External HD. The photo's I delete never end up getting erased from my external HD though. So now I'm still stuck with a back up of a bunch of pictures I don't want on my external HD. They are gone from iPhoto but this doesn't help or avoid taking up space. This only cleans up iPhoto library but not my actual external HD.
So am I correct that there actually isn't any way to do this other than going through the photo's on my external HD using Finder and deleting them before importing to iPhoto?

A managed library is the default type that iPhoto creates. Make sure you have the option selected to copy photos into iPhoto when importing:
was hoping it would at least keep thumbnails of all my photo's.
I use a DAM (digital asset management) program which will do exactly what you want: Media Pro 1. It creates catalogs (libraries) of thumbnails, up to 640 x 480, that is uses to manage the photos. You can do anything to the photos except edit, slideshows, or anything that requires the full source image when the source files are not available. You can arrange photos in Catalog Sets (like iPhoto albums), add keywords, etc. to them even when the sorce files are not available. When the source files are available you can write that metadata to the source file and rename files. You can use Media Pro in demo mode for about a month I believe.
A catalog file for 44,000 photos (178 GB) with the thumbnails set for 320 pixels at high resolution is only 1.5 GB. The larger the thumbnail selected the larger the catalog file will be.

How you create a group to send many txt msg at the same time?

How you create a group to send many txt msg at the same time?

The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

When in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

when in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

If you mean searching for a song that you already have in your Library, then you can select "Music" first. Then, go across horizontally to Genres and select that; then by using the drop-down menu found under "View" & (of course) select "View Options"-- you will be presented with a limited # of choices to sort by.
My iTunes 11.0.5 shows 4 parameters to choose from: Title, Artist, Year and Rating. Then you can sort & finally...
Enjoy,
mm~

Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

Some programs do not run: update software, mac App Store, Calendar, ibooks.V the same time, the program iTunes, iPhoto and other work normally. What to do?

Hello JohnnyChin95,
You absolutely can just reinstall OS X Mavericks without having to erase and install. The steps to do that are almost the same as the only thing you do differently is that you do not go to Disk Utility to erase the drive. Just go to the Reinstall OS X option and pick your Hard Drive and follow the on screen instructions to get it going. Check out the article below for the step by step process.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Regards,
-Norm G.

How do I keep my husbands apps from appearing on my device? While at the same time sharing content so we don't have to pay twice for music and apps?

How do I prevent my spouse's apps from appearing on my device, and visa versa while at the same time sharing music and apps so that we don't have to pay twice?

Okay. Your personal iCloud account really isn't involved here. If apps purchased on another person's device are automatically downloading to your device, it's because you have Apps turned on under Automatic Downloads in Settings>iTunes & App Store. If you turn it off, the downloads will stop. If desired, also turn off Music and Books to prevent these from automatically appearing on your device when purchased by someone else.
You can then control which of these, if any, you download to your device by selectively download them from your purchased list as explained here: http://support.apple.com/kb/HT2519. As long as everyone is sharing the same Apple ID for their purchases, they will all appear on this list.
As far a music organization, you should be sure all your music is in your iTunes library on your computer. You can then create the playlists you want and sync them to your device using iTunes.

How to create a proxy that accept requestes get/post in the same time?

Hi everybody,
I have two questions with Service Bus 11gR1.
I have to create a proxy in https that accept request get/post in the same time, also this proxy should be able to recognize the common name of the certificate.
Is it possibile?
Thanks a lot.
Ettore

The approach I mentioned is part of correctly configuring client cert authentication. For client cert authentication to succeed weblogic expects the user derived from the certificate by the user name mapper class to exist ( just exist , it wont check the password) in its security realm. The problem you have mentioned is common for any type of 'authentication' and not just specific to this approach.
The user name mapper class can be configured to accept any attribute in the certificate DN as the mapped user. Since the thread starter is interested in CN, then he has to set CN as the mapping attribute.
Edited by: atheek1 on Nov 10, 2010 1:33 AM

How can collect the data from laptop sound card and serial port at the same time?

I'm working on a project, I need to collect the data from laptop sound card, and also from serial port at the same time.
The attachments are my VIs for sound card and serial port communication, I'm wondering that can I combine these two VIs together? Or can I run these two VI at the same time?
Thank you!
Attachments:
AC_Radar_Receive.vi ‏46 KB
RadarAudioPlug.vi ‏774 KB

A smarter way is just to put all your code in the same VI.
Two parallel loops if rates are different.
Attachments:
RadarAudioPlug.vi ‏450 KB

Can I use Creative Cloud for students on more than one computer at the same time?

I get different info when I read about how I could use creative cloud.
Somewhere it say I can install and activate on two computers but only run the applications on one computer at the time.
On antother place I read that I can use the applications on two computers at the same time.
So what is correct?
Can I install and activa Creative Cloud for students on my PC and my Mac and also run the applications on both computers at the same time?

I already gave you the info you seek, but you don't seem to want to accept it. Here it is in writing from Adobe's EULA (find it at: General-terms)
"4.1 Subscription-Based Software License.
If we provide the Software to you as part of your subscription to use the Services, then subject to your compliance with these terms, we grant you a non-exclusive license to install and use the Software: (a) in the Territory, (b) so long as your subscription is valid, and (c) consistent with these terms and related documentation accompanying the Software. “Territory” means worldwide, but excludes any U.S. embargoed countries and countries where you are prohibited from using the Software or the Services. You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation. However, you may not use the Software on these devices simultaneously."
You appear to want to believe that because you think you have a way of getting around the agreement without being caught it would be okay to do. You are bound to the agreement if you purchase the subscription. Do you understand what intentionally (and with fore-knowledge) failing to honor a contract constitutes?

How to input/output a digital signal and acquire an analog signal at the same time?

Dasylab, version: 8.0.04
Acquirement Card: PCI1002L
When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
same time, DasyLab tell me the rate is too high and stop.
so, I searched the manual book1 (user guide) for that, it showed me :
To internally equalize measurement time and system time in the analog input, digital input and counter
hardware modules, use the following settings:
   Synchronization: PC Clock
   Sampling rate: <= 5Hz
   Block size: =1
the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
application.
so, how to improve it? who can give me a example programm for me. thanks!
by the way, I come from China, my English isn't good, I'm sorry.
Allen, China.

Hi,
Have things changed over the years?
I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
1. What can be done to synchronise AI with DO?
2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
Thanks in advance!

How do I listen to music on my iMac and Bose Soundlink at the same time???

I just bought a Bose Soundlink Color. However I can only listen to either the iMac or the soundlink. Not both at the same time. Can you do this and if you can how do I fix it. Thanks for any help.

Welcome to the Apple Community.
Use the multiple speakers option from the AirPlay menu.

Acquiring a signal from two separate DAQs at different rates at the same time

Hi I am trying to setup a system where I need to build two separate arrays one from two separate sets of data. The data needs to be brought in at the same time, but at a different rate. One set is from the PCI-4472 and will come in at ~10Hz, while the other is from a SCXI-1102 that is connected one channel on a PCI-6070E at ~3-5Hz. I was wondering how to have the two be read at the same time, but at the different speed. I am using LabView 6.1. Thanks in advance.

Hi Muheesh:
Since your DAQ's are working at an exact multiple of one another, what you could do is fill alternate channels with some "DUMMY" data...like zeros. Then you could index the array and match it up with the faster card. It might seem like a waste of memory, but it will give you two sets of aligned data, which seems to be what you need. If you're operating them at some weird multiple, it's a bit trickier. Whatever you do, you're going to have to insert some bits somewhere. Look for a least common factor (LCF) of your sample rates, and see if you can divide by that before logging the data.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

In osx 10.8.2, how do I maintain two Bluetooth devices (mouse and head-set) connected at the same time?

I want to use both a Bluetooth mouse and head-set at the same time, is that possible?

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

Can takes from more than one track be comped at the same time?

Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542&#9527542), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.

You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

How to use documents created from software on bootcamp, on my MBP at the same time?

Similar Messages

Maybe you are looking for