How to use Draw documnet wizar to a user form?

Hi all,
         I have created one form with matrix.I want to get a copy of sales quotation's data in my form. How to get through coding.
(How to use Draw document wizard through coding)
         My form using UDO.Just like In my form i have created one button .If i click that button the list of sales quotations for the particular cutomer has to be displayed.
          From that i have to select one quotation,that data has to be filled   in my form.
         Please help me.How to do that?
        What is the menu ID for Draw document wizard.If i get that how can i link it with the my form having datas using UDO.
         Please help me to solve this problem
Regards
V.Rangarajan

Hi,
If you want to search for a specific menu ID you only have to activate the "System Information" with the B1 menu View -> System Information. After that when you use the Menus in the top of B1 application (all menus included the same ones as in the Modules form) you will be able to ee the MenuIDs in the bottom of B1 application.
If you want to open a document form with information inside it I will say to better create a grid with the list of documents you want to show everytime (please have a look to UI API Grid item in help file, there is also a sample in the SDK UI samples) and make one of the columns a LinkButton, when the user will click in the link button the document form will open automatically. You have also many posts talking about how to create a link button in a grid, please use the search capabitility of this forum.
Hope it helps
Trinidad.

Similar Messages

How to use Ajax Get Multiple Values in Tabular form?

Hi All-
I am trying to use AJAX to get multiple values in tabular form by using Denes Kubicek's example in the following link -
http://apex.oracle.com/pls/otn/f?p=31517:239:9172467565606::NO:::
Basically, I want to use the drop down list to populate rest of the values on the form.
I have created the example(Ajax Get Multiple Values, application 54522) on Oracle site -
http://apex.oracle.com/pls/apex/f?p=4550:1:0:::::
Workspace: iConnect
login: demo
password: demo
I was able to duplicate his example on page 1 (home page).
However, I want to use system generate tabular form to finish this example, and was not able to populate the data correctly.
Page 2 (method 2) is the one that I am having trouble to populate the column values. When I checked application item values in Session, and the values seems to be populated correctly.
This is what I have done on this page:
1. Create an Application Process On Demand - Set_Multi_Items_Tabular2:
DECLARE
v_subject my_book_store.subject%TYPE;
v_price my_book_store.price%TYPE;
v_author my_book_store.author%TYPE;
v_qty NUMBER;
CURSOR cur_c
IS
SELECT subject, price, author, 1 qty
FROM my_book_store
WHERE book_id = :temporary_application_item2;
BEGIN
FOR c IN cur_c
LOOP
v_subject := c.subject;
v_price := c.price;
v_author := c.author;
v_qty := c.qty;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="f04_' || :t_rownum || '">' || v_subject || '</item>');
HTP.prn ('<item id="f05_' || :t_rownum || '">' || v_price || '</item>');
HTP.prn ('<item id="f06_' || :t_rownum || '">' || v_author || '</item>');
HTP.prn ('<item id="f07_' || :t_rownum || '">' || v_qty || '</item>');
HTP.prn ('</body>');
END;
2. Create two application items - TEMPORARY_APPLICATION_ITEM2, T_ROWNUM2
3. Put the following in the Page Header:
<script language="JavaScript" type="text/javascript">
function f_set_multi_items_tabular2(pValue, pRow){
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=Set_Multi_Items_Tabular2',0);
if(pValue){
get.add('TEMPORARY_APPLICATION_ITEM2',pValue)
get.add('T_ROWNUM2',pRow)
}else{
get.add('TEMPORARY_APPLICATION_ITEM2','null')
    gReturn = get.get('XML');
    if(gReturn){
        var l_Count = gReturn.getElementsByTagName("item").length;
        for(var i = 0;i<l_Count;i++){
            var l_Opt_Xml = gReturn.getElementsByTagName("item")[i];
            var l_ID = l_Opt_Xml.getAttribute('id');
            var l_El = html_GetElement(l_ID);
            if(l_Opt_Xml.firstChild){
                var l_Value = l_Opt_Xml.firstChild.nodeValue;
            }else{
                var l_Value = '';
            if(l_El){
                if(l_El.tagName == 'INPUT'){
                    l_El.value = l_Value;
                }else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
                    l_El.parentNode.innerHTML = l_Value;
                    l_El.parentNode.id = l_ID;
                }else{
                    l_El.innerHTML = l_Value;
    get = null;
</script>
Add the follwing to the end of the above JavaScript:
<script language="JavaScript" type="text/javascript">
function setLOV(filter, list2)
var s = filter.id;
var item = s.substring(3,8);
var field2 = list2 + item;
f_set_multi_items_tabular2(filter, field2);
4. Tabular form query:
select
"BOOK_ID",
"BOOK",
"SUBJECT",
"PRICE",
"AUTHOR",
"QTY",
"BOOK_ID" BOOK_ID_DISPLAY
from "#OWNER#"."MY_BOOK_STORE"
5. In Book_ID_DISPLAY column attribute:
Add the following code to element attributes: onchange="javascript:f_set_multi_items_tabular2(this.value,'#ROWNUM#');"
Changed to -> onchange="javascript:setLOV(this,'f03');"
Now, T_ROWNUM2 returns value as f03_0001. But, TEMPORARY_APPLICATION_ITEM2 returns as [object HTMLSelectElement]...
Please help me to see how I can populate the data with this tabular form format. Thanks a lot in advanced!!!
Ling
Updated code in Red..

Ling
Lets start with looking at what the javascript code is doing.
function f_set_multi_items_tabular(pValue, pRow){
/*This will initiate the url for the demand process to run*/
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
                          'APPLICATION_PROCESS=Set_Multi_Items_Tabular',0);
if(pValue){
    /*If there is an value than submit item name with value*/
    get.add('TEMPORARY_APPLICATION_ITEM',pValue)
    get.add('T_ROWNUM',pRow)
}else{
    /*Else set the item TEMPORARY_APPLICATION_ITEM to null*/
    get.add('TEMPORARY_APPLICATION_ITEM','null')
/*Submit the url and te returned document is of type XML*/
gReturn = get.get('XML');
if(gReturn){
    /*There is something returned*/
    var l_Count = gReturn.getElementsByTagName("item").length;
    /*For all elements of the tag item*/
    for(var i = 0;i<l_Count;i++){
      /*Get the item out of the XML*/
      var l_Opt_Xml = gReturn.getElementsByTagName("item")[i];
      /*Get the id of the item*/
      var l_ID = l_Opt_Xml.getAttribute('id');
      /*Get the element in the original page with the same id as
      **the item we have in the XML produced by the ondemand process
      var l_El = html_GetElement(l_ID);
      /*Now get the value of the item form the XML*/
      if(l_Opt_Xml.firstChild){
        var l_Value = l_Opt_Xml.firstChild.nodeValue;
      }else{
        /*There is no value*/
        var l_Value = '';
      if(l_El){
        /*There is an element with the same id as the item we are processing*/
        if(l_El.tagName == 'INPUT'){
          /*The element is an input item just set the value*/
          l_El.value = l_Value;
        }else if(l_El.tagName == 'SPAN' && l_El.className == 'grabber'){
          /*If it is a span elment and has the class grabber
          **Then set the innerHTML of the parent to the value
          **and the id of the parent to the id
          l_El.parentNode.innerHTML = l_Value;
          l_El.parentNode.id = l_ID;
        }else{
          /*Else set the value as innerHTML*/
          l_El.innerHTML = l_Value;
get = null;
Now where it went wrong in your initial post
The XML that was returned by your XML process would be something like
<body>
<desc>this xml genericly sets multiple items</desc>
<item id="f02_1">CSS Mastery</item>
<item id="f03_1">22</item>
<item id="f04_1">Andy Budd</item>
<item id="f05_1">1</item>
</body>
When you don't use apex_item to create your tabular form a item in the table will look like
<input id="f02_0001" type="text" value="CSS Mastery" maxlength="2000" size="16" name="f05" autocomplete="off">
Notice the id's f02_1 and f02_0001 don't match.
So to make it work the XML would have to look like
<body>
<desc>this xml genericly sets multiple items</desc>
<item id="f02_0001">CSS Mastery</item>
<item id="f03_0001">22</item>
<item id="f04_0001">Andy Budd</item>
<item id="f05_0001">1</item>
</body>
To do that simply use lpad in the ondemand process like
HTP.prn ('<item id="f02_' || lpad(:t_rownum,4,'0') || '">' || v_subject || '</item>');
HTP.prn ('<item id="f03_' || lpad(:t_rownum,4,'0') || '">' || v_price || '</item>');
HTP.prn ('<item id="f04_' || lpad(:t_rownum,4,'0') || '">' || v_author || '</item>');
HTP.prn ('<item id="f05_' || lpad(:t_rownum,4,'0') || '">' || v_qty || '</item>');
Keep in mind that the above is based on your original post and #ROWNUM# not being lpadded with zero's.
Nicolette

How to use migration assistant without creating dual user accounts

I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!

If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.

How to use add row button of a tabuler form.

Hi all,
I have created a Tabuler form in my application.Could you please tell me 'How can i use the add row button of this form' as When i click the button "NOTHING HAPPENS".
Thanks
Regards,
Neha

Hi,
If you edit the button, the button name has to be 'ADD'. You can make the text / label whatever you like. On the form edit page, the button should appear with this text next to it: submit as "ADD".
HTH

How to use Microsoft DateTime Picker ActiveX control in Forms 6i?

Does anyone have idea on how to use Microsoft Date-Time Picker ActiveX component in Forms 6i? Please give me coding examples for using this control to retrieve & store date at the backend.
Regards

when u load activex (spreedsheet) the corresponting menu also u can see when u run through which also you can set the attribute values
im also check the same it is working
sorry i saw it on design time
kansih
Edited by: Kanish on Apr 28, 2009 2:54 AM

How to use advanced PL/SQL concepts in oracle forms/reports

Hi all,
Can any one suggest me how to use the advanced PL/SQL Concepts(nested tables,PAA,Varrays,Objects...) in Oracle forms.
Actually i Created a Table having column of Varray datatype. now i want to create a item in oracle forms on this field. can any one suggest me the way to do this.
Thanks,
Kumar

Hello,
Have a look at this one:
http://sheikyerbouti.developpez.com/tutoforms10g/tutoforms10g.htm
particularly the chapter about block that contain a collection (2.3.3). The sample is built around a nested table but you have the idea to adapt it to work with a varray.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

How best use the four internal disks for user folder?

Hi everyone
With the addition of a new boot disk in the second optical bay i wish to restructure my user folder. It has so far lived on one drive which i have backed up every day to one of the other internals (i also have external backups). One reason i have installed a new boot disk in the optical bay is that i have run out of space on the user folder drive (and its backup drive).
I am now wondering how i should set up the four internals if i want to use all of them for the user folder and an internal backup. Performance is an important consideration for me.
I know raid setups are not backups but given that i also have external backup could i use, for instance, raid 1 or 1+0 to mimic the current two-disk setup? Which would be preferable and are there other alternative (such as having some subfolders of the user folder, like photos and documents, on one disk and the rest of the subfolders on another disk)?
Thanks for your help
/p

I said forget those fancy software 0+1 or 10; they aren't supported, have high overhead, and you need 4 drives of same and would still not have enough space. Why bring it up again, it's still no in my book and from trouble it can be.
I'm not even a fan of Apple mirror arrays. they are fine for where 24/7 and live audio recording and to protect from the rare drive failure is all. And then I use SoftRAID.com ($149).
Full to me means less than 20% free. Though I tend to keep drives closer to 35-40% free. Less than 10-15% or less than 10-20GB can be hazardous.
Don't put scratch on boot drive. Get more RAM, have another drive or two for scratch if necessary unless it doesn't impact you. It should though. Spotlight can get in the way, needs to be disabled so having a dedicated volume on another drive has always worked best.

How to add a new tab on modify user form

Hi,
In OIM11g, we can assign roles to a user using a tab named Roles in the modify user form. I want to add a new custom tab alongside all the already present tabs.
The new custom attribute functions the same as 'Roles' in OIM.
Does OIM11g provide any functionlity to do so?
Thanks..

Have you seen the 11g tutorial thing about adding a Custom ADF tabs in OIM Self Service Console at
http://apex.oracle.com/pls/apex/f?p=9830:37:3242381082783477::NO:RIR:IR_PRODUCT,IR_PRODUCT_SUITE,IR_PRODUCT_COMPONENT,IR_RELEASE,IR_TYPE,IRC_ROWFILTER,IR_FUNCTIONAL_CATEGORY:,,,OIM_11g,,,
Is that any help?
Also, more general advice on customising OIM 11g is available at:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm
Try metalink too because there may be examples of how to do stuff with OIM 11g there.
Good luck

How to use single JSP page for multiple users.

Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.

SuneelGoodatJava wrote:
Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.HTTP is a request/response protocol. You can't do what you're suggesting without "pushing" what you type to all the other users. That's not the way HTTP works. Maybe an applet and servlet.
%

How to use Final Cut Pro with multiple user accounts?

Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?

I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

How to use your own database with your users to authenticate in a Web app?

Hello, everybody!
I'm starting to write my first web application and I'm going to use JSF, JPA and EJB3 in this application. One of the first things that I have to do on it is the authentication part where I'll have a page with a user name and a password for the user to login. So, as I'm new to all this in Java (I've already implemented this on .NET in the past), I was studying the Java EE 5 Tutorial, especifically the section "Example: Using Form-Based Authentication with a JSP Page". But I saw that the users that the sample application uses come from the file realm on the Application Server. The users are created there and assigned a name, a password and a group. After the users are in the Application Server we can simply uses forms authentication declaratively in the deployment descriptor (web.xml).
But the problem is that this doesn't work to me as I already have my own database with my users, so I want to use it instead of having to create the users on the Application Server.
So, I'm asking you how to do that. Of course I'm not expecting that you place the code here to me as I know that such a thing could be complicated. Instead, I'm asking if you know about some tutorial, article, book or something that teaches how to do what I want. But I would like to see theses examples using JSF and/or EJB3 because these are the technologies that I'm using to develop. It's a pity that the Java EE 5 Tutorial doesn't have an example using a custom database as I know that this situation is very common in the majority of web sites.
Thank you very much.
Marcos

From memory, it goes like this... You just create a
raw jdbc connection on your user database using a
special "login" DB user account, which has
permissions only to an "authenticate" stored query,
which accepts two arguments: username & password, and
returns a boolean 0 or 1 rows found.When I implemented this in .NET's ASP.NET I had the same solution. I had an special user created in the database that I used to log in. When the real user entered his username and password I was already logged in and I had just to check his username and password agains the right table in my database.
But that was only possible bacause when I connected to the database using my hidden user, I used the rights APIs in ASP.NET that coordinate the authentication process. This means that before login in, no one could access any resources (pages, atc...). So what I'm saying is that I can't manager this manually in Java. Java has to have some API or whatever to allow me to control the login process programmatically, while letting the Application Server control the access to the resources.

How to use AT LINE-SELECTION and AT USER-COMMAND in one report????

Dear all,
I have a problem in reports I want to use AT USER-COMMAND.and AT LINE-SELECTION.both in the one report.
But as soon as I use SET PF-STATUS my AT LINE-SELECTION event stop workingand only AT USER-COMMAND is working.
How can I use both of them in one report for your reference I am giving my test program below.
REPORT ZTEST111 .
SET PF-STATUS '100'.
DO 10 TIMES.
WRITE:/ SY-INDEX.
HIDE SY-INDEX.
ENDDO.
START-OF-SELECTION.
AT LINE-SELECTION.
MESSAGE I002(SY) WITH SY-INDEX.
AT USER-COMMAND.
MESSAGE I002(SY) WITH 'USER COMMAND'.
END-OF-SELECTION.
Thanks in advance
Sachin Gautam

hi
Syntax
AT USER-COMMAND.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named abap.lst in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel

How to use same jsp for edit and add form

Hi,
I would like to use the same .jsp file for edit and add. I just want to change a few controls based on edit/add mode. How do I configure this in the jsp?

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

How to use pl/sql code as ODI user defined function

Hi All,
i have a pl/sql code and i want to create ODI user defined function using this code .
please find the pl/sql code below:
============================
declare
v_no_of_duplicate_rec number := 0;
begin
select count(*)
into v_no_of_duplicate_rec
from ( select 1
from temp_pre_selections
group by svb_number, selection_id
having count(*) > 1);
if v_no_of_duplicate_rec = 0 then
return 'N';
else
return 'Y';
end if;
end if;
==========================
please help me how to achieve the same .
Thanks
Vinod

2 ways:
a. implement logic in odi function directly: getCount, Oracle implementation:
select case count(1) when 0 then 'N' else 'Y' end
from hr.employees
when you use this function to refresh a variable, the refresh statement should only be getCount, you shoueld not write select getCount from dual, otherwise it will become
select select .... from ... from dual
b. if your logic is complex, I suggest to write function directly in your database, then call this function in your ODI function
eg:
CREATE OR REPLACE FUNCTION hr.test RETURN varchar2 IS
tmpVar NUMBER;
BEGIN
select count(1) into tmpVar from hr.employees;
if tmpVar=0 then
return 'N';
else
return 'Y';
end if;
END test;
then create a ODI function, Oracle implementation is
hr.test
in your variable refresh statement, you can write select getCount from dual
if you use the odi function in other locations expect for refreshing variable, the idea is similar

How to use the 'Username' filed's value in form level scripting?

Hi,
I have applied the Rights Management for a form. I wanted to use the 'Username' field's value, which is present in below image for the form side scripting. How can we get this value? Any script is there to extract this value in the form?
Thanks in advance,
Arjun

Hi Jo,
Thanks for the reply. The settings (MobileEngine.Security.SyncPasswordFieldAtLogon=true) in my Mobile client is such that when i open it i am asked the User, Logon Password and the Synchronization password(which is not mandatory). So if I dont even enter it during logon i am asked to enter it when i hit the sync button on the client.
But if i have entered it during logon and then hit the sync button on the client, that time i am not asked to re-enter my sync passwd and the client syncs with the b/e. Which means that the sync passwd i had entered during logon is definitely stored somewhere.
What i mean by using the sync passwd in applications is this :-
-> In a generic sync appln before synchronising with the b/e we need to give the sync passwd to the SyncManager. How do we get this sync password from the user of the appln?
-> We can either ask him to enter it as in input to a jsp OR else since he has already entered it during logon we need not ask him to enter it again and retrieve it via some API.
Is this possible.
Thanks & Regards,
Saurabh.
Message was edited by:
Saurabh Agarwal

How to use Draw documnet wizar to a user form?

Similar Messages

Maybe you are looking for