How to use dynamic list box in survey builder?

Hello,
Could someone give me a little bit of thread? How to use dynamic list box in survey builder?

Hi Liu,
Dynamic combo boxes::A combo box is dynamic if it references a document property for which a value set is defined in the configuration (System Administration ® System Configuration ® Content Management ® Global Services ® Property Metadata ® Properties ® Parameter Allowed Values).
At runtime (when you open the creation form) the system reads these values from the configuration and displays them in the dropdown list.
If you link a combo box for which list entries already exist to a document property with a value set, the system asks whether you want to delete the list entries. it is recommend that you accept this suggestion and delete the list entries from the XML Forms Builder. Otherwise inconsistencies could arise between the entries in the XML Forms Builder and the value set in the configuration. This can cause errors when saving.
Also you may Refer the Link for Further help:
http://help.sap.com/saphelp_crm50/helpdata/en/29/c40d3d2a83752de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/00/9e7f41969e1809e10000000a155106/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a7/5a874174a8050de10000000a1550b0/frameset.htm
Hope it Answers your Queries..
Thanks and Regards,
RK.

Similar Messages

"Dynamic List Box with Single Selection" Survey Suite in CRM 6.0

Hi
I am using CRM 6.0. There in Survey Suite there are 2 answering options "Dynamic List Box with Single Selection" & "Dynamic List Box with Multiple Selection". I am able to make out, how we can assign values to this. I have seen example "Example_Dynamic_survey" also.
I believe we have to use programming for populating this. But how do we have to carry that out.
Thanx and Regards
Hitesh

Hi Hitesh,
There is no need of programming for populating values for Answer category 'List Box with Single Selection' or 'List Box with Multiple Selection'. You have to follow the following steps to populate values for those:
- In the Answer Category select List Box with Single Selection from drop down list
- Then on left hand side tree, right click on Answer and select Insert Answer Option (Answer->Insert Answer Option)
- Then on right side, provide Text for the answer (value)
- To add more values, repeat the process Answer->Insert Answer Option and providing text for those answers in the right side.
Similarly you can populate values for 'List Box with Multiple Selection' also.
This has to be done in the transaction CRM_SURVEY_SUITE.
Hope this is clear to you
regards
Srikantan

Populating a Dynamic List Box in CRM Survey

Hi All,
I am currently creating a CRM Survey and am trying to use the 'Dynamic List Box with Single/Multiple Selection' options, but cannot see how i can populate these lists. I get the following error message when selecting the 'Insert Answer Option:
'Dynamic list boxes' cannot contain statistical answer options'
I have tried this through both Survey Suite and UI, but cannot go any further. Can anyone point me to where i can populate this list? Sounds like possible a backend table, but i cannot find which one.
Many Thanks
Indi

Would anyone be able to help please?
Thanks
Indi

Surveys - dynamic list box option

Hi,
How can I control the entries for the answer category "Dynamic list box with single selection"?
Thanks,
Susana Messias

Hello Susana,
To maintain dynamic values for a specific answer, select your survey in the Survey Suite and go to the maintenance of survey attributes (CTRL+F12). Under the tab 'Technical settings', you can maintain the 'Callback to PBO' function module, which allows you to modify the survey at runtime. (The function module you specify here is called by the survey tool runtime environment at PBO.)
As an example, you can have a look at the function module 'CRM_SVY_EXAMPLE_DYNAMIC_PBO', which contains a section to set answer options at runtime. Of course, you would have to program your own logic to meet your specific requirements for setting the values.
I hope this helps.
Kind regards,
Kristoff

Problem in using the list box

hi,
i have developed a dynamic list box, in html using java script.i have taken two list boxes. the values of second list box depends on the value selected in the first list box. after selection i was moving to the next page,then after i was moving back to original page, then the value of the second list box is changing.so how to retain the value of the second list box.
Help ASAP,
thank you,bbye

Either store it in the session scope, or pass it as a (hidden?) parameter along the request.

Display selected items in dynamic list box

I need to display the selected items in a dynamic list box -
this worked great - but now client wants multiple selected. I do
have the items comma delimited in single field (but I can change
that if I need to) - so how do I make those items display as
selected in list. I'm using asp and standard dreamweaver list based
on a recordset.

There is a better approach. I faced a similar problem and put all the logic in a Javascript function. I modified my code to suit your needs.
My HTML will have the following.
<body onLoad="javascript:initLanguages();">
<form name="languageForm">
    <select size="1" name="languagesList">
    </select>
</form>
</body>I created a Javascript function
<script language="Javascript">
//-- put all your languages here in a Javascript Array if they are fixed.
//-- If you get the langauges from a Java object (dynamic or configurable), generate the Javascript in that object and insert a scriptlet in the HTML that plugs in the generated Javascript into this HTML. If so, take care of the quotes and double quotes. They are tricky !!!
var languageArray = new Array("Fran?ais", "English", "Espanol", "Deutsch", "Italiano");
function initLanguages ()
    var listCounter = 0;
    for (var ind=0; languageArray != null && ind < languageArray.length; ++ind)
      var obj = eval("new Option" + languageArray[ind]);
      eval("document.languagesForm.languagesList.options[listCounter]=" + "new Option" + languageArray[ind]);
      if(document.languagesForm.languagesList.options[listCounter].value == "<%= selectedLanguage %>")
        document.languagesForm.languagesList.options[listCounter].selected = true;
      listCounter += 1;
</script>
selectedLanguage is something you get in the Java code
<%
selectedLanguage = myObj.getSelectedLanguage();
%>

How to edit the list box items in labwindow/CVI?

how to edit the list box items in labwindow/CVI?

Listbox items cannot be edited directly in the control: what you can do is to select a line an, transfer its content to a textbox control, edit text there and move text back to the listbox control. Available interactions with the listbox control are listed in the help.
An alternative to it is to use a tree customized to appear like a listbox: tree item labels can be edited directly in the control, at least those in the base column of the tree. You can look at the example \samples\userint\treelist.cws that shows how a tree can be customized this way. I haven't opened it, but this old example too should show the ability to edit tree cells.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to populate a list box linked to selection in combo box?

Hi All,
I am a beginner in Xcelsius. I am having problem on how to populate a list box based on the selection on my combo box.
I have a combo box and a list box. The combo box value consist of Countries. Values are:
Singapore
Indonesia
Thailand
When I select, for i.e. Indonesia, I want to populate the list box with all the Postal Code of Indonesia. When I select Thailand, i want to do the same.
Can anyone shed some lights on how to achieve this?
My spreadsheet data is as follow
Country         Postal Code
Singapore     680123
Singapore     680124
Singapore     680125
Indonesia     155123
Indonesia     155124
Indonesia     155125
Indonesia     155126
Thailand       333123
Many Thanks,
Harianto

Hi,
I am detailing the complete steps below:
In the combobox select the entire range of Country while seeing the records from the Combobox, Xcelsius will automatically show the unique values in the selection.
After that in the "Data Insertion" section for Combobox select the "Insertion Type" as "Filtered Rows" (please click on the question mark beside this option and it will show how the selection works).
In the source select the postal code, in the destination select the range which will be used as a data source for the list box.
This will resolve the concern. Please remember to select the question mark beside the "Insertion Type" option, it explains the working in specific details.
Best of luck.
Regards,
Gourav

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How-to create dependent list boxes in a table -Frank Sample

hi everyone i would like to ask a suggestion about Frank's example on How-to create dependent list boxes in a table -Frank Sample ...
i want to extend this example for 3 dependent lists... including locations, departaments and employes....
this the ListboxBean java that Frank is using in his example.... and this is only for locations and departaments tables and it works ok... i want to add the third list for employers wich is dependent only from departaments list.... as i am not good in java i would like to ask u a suggestion on how to develop the third list in this java class ...
public class ListboxBean {
private SelectItem[] locationsSelectItems = null;
private SelectItem[] departmentsSelectItems = null;
public SelectItem[] getLocationsSelectItems() {
if (locationsSelectItems == null){
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vbinding = fctx.getApplication().createValueBinding("#{bindings.LocationsView1Iterator}");
DCIteratorBinding locationsIterBinding = (DCIteratorBinding) vbinding.getValue(fctx);
locationsIterBinding.executeQuery();
Row[] locRowsArray = locationsIterBinding.getAllRowsInRange();
// define select items
locationsSelectItems = new SelectItem[locRowsArray.length];
for (int indx = 0; indx < locRowsArray.length; indx++) {
SelectItem addItem = new SelectItem();
addItem.setLabel((String)locRowsArray[indx].getAttribute("City"));
addItem.setValue(locRowsArray[indx].getAttribute("LocationId"));
locationsSelectItems[indx] = addItem;
return locationsSelectItems;
return locationsSelectItems;
public SelectItem[] getDepartmentsSelectItems() {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vbinding = fctx.getApplication().createValueBinding("#{row}");
JUCtrlValueBindingRef rwJUCtrlValueBinding = (JUCtrlValueBindingRef) vbinding.getValue(fctx);
Row rw = rwJUCtrlValueBinding.getRow();
if (rw.getAttribute(6) != null){
OperationBinding oBinding = (OperationBinding) fctx.getApplication().createValueBinding("#{bindings.ExecuteWithParams}").getValue(fctx);
oBinding.getParamsMap().put("locId",rw.getAttribute(6).toString());
oBinding.execute();
ValueBinding vbinding2 = fctx.getApplication().createValueBinding("#{bindings.DepartmentsView2Iterator}");
DCIteratorBinding departmentsIterBinding = (DCIteratorBinding) vbinding2.getValue(fctx);
departmentsIterBinding.executeQuery();
Row[] depRowsArray = departmentsIterBinding.getAllRowsInRange();
// define select items
departmentsSelectItems = new SelectItem[depRowsArray.length];
for (int indx = 0; indx < depRowsArray.length; indx++) {
SelectItem addItem = new SelectItem();
addItem.setLabel((String)depRowsArray[indx].getAttribute("DepartmentName"));
addItem.setValue(depRowsArray[indx].getAttribute("DepartmentId"));
departmentsSelectItems[indx] = addItem;
return departmentsSelectItems;
public void setLocationsSelectItems(SelectItem[] locationsSelectItems) {
this.locationsSelectItems = locationsSelectItems;
public void setDepartmentsSelectItems(SelectItem[] departmentsSelectItems) {
this.departmentsSelectItems = departmentsSelectItems;
Thanks in advance :0

Hi,
I think that all you need to do is to look at how I implemented the dependent detail for querying the Employees select items
Then you make sure the DepartmentsVO and the EmployeesVO have bind variable to query them according to the pre-selected value in their respective master list
Frank

How to Use Dynamic SQL

Can anybody please send me a small program on How to Use Dynamic SQL.
How to execute and run give details.
Thanks
null

You can certainly use the INTO (and USING) clauses of EXECUTE IMMEDIATE to pass in and return data, i.e.
EXECUTE IMMEDIATE sqlStmt
USING variable1, variable2
INTO output1, output2The more complex the statement, however, the more appropriate DBMS_SQL is. DBMS_SQL also has the potential to allow you to use bind variables rather than reparsing the statement many times.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to use the Combo Box In MAtrix Colums

HI Experts,
Good Mornong.How to use the Combo Box In MAtrix Colums?
Regards And Thanks,
M.Thippa Reddy

hi,
loading data in to the combobox on form load.but, it should be done when atleast one row is active.
the values what ever you are inserting in to combo should be less than or eqhal to 100 or 150.if it exceeds beyond that performance issue arises.it takes more time to load all the data.so, it is better to have 100 or less.
oMatrix.AddRow()
RS = Nothing
RS = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
RS.DoQuery("select ItemCode,ItemName from oitm")
oCombo = oMatrix.Columns.Item("ColumnUID").Cells.Item(oMatrix.RowCount).Specific
For i = 1 To RS.RecordCount
      If RS.EoF = False Then
            oCombo.ValidValues.Add(RS.Fields.Item("ItemCode").Value,RS.Fields.Item("ItemName").Value)
            RS.MoveNext()
      End If
Next
the above code is inserting data from database to column combobox.
you can fill combo directly also as shown below.
oCombo.ValidValues.Add("x","1")
oCombo.ValidValues.Add("y","2")
oCombo.ValidValues.Add("z","3")
oCombo.ValidValues.Add("","")
and what ever the values you are filling into combo should be unique.other wise it shows valid value exists.
regards,
varma

How to use intractive list in Alv REPORT

how to use intractive list in Alv REPORT with example.
thangs
venki.......

Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji

How to use dynamic select query which queries from 3 different table.

Hi All,
I am new to Toplink, i would like to use a named query to select some of the columns from 3 different tables with dynamic where clause.
I have used the following lines. Please tell me how to get code for the dynamic where clause.
First try :
Vector objPersons = (Vector)session.executeQuery("findPersonByGlobalID",Person.class,vQueryArguments);
The above method is not returning the vector or collection.
Second Try:
ReadAllQuery query = new ReadAllQuery(Person.class);
query.useCollectionClass(LinkedList.class);
LinkedList person = (LinkedList) session.executeQuery(query);
The second try is returning the collection but, this fetches all the record from the table.
1. How to query for range of records?
2. How to query from multiple tables for some range. How to use dynamic range values ?
Please reply with your answers or some pointers would help.
Thanks and Regards,
Vijay.B

Hi,
Did you try using a SQLCall ? It might be able to satisfy you requirements .. :-
Employee employee = (Employee) session.executeSelectingCall(
new SQLCall("SELECT * FROM EMPLOYEE WHERE EMP_ID = 44")
);You can get more information here :-
http://www.oracle.com/technology/products/ias/toplink/doc/1013/MAIN/_html/qrybas004.htm
Regards,
Sandeep

How to use dynamically column_name and column_name value in plsql procedure

hi,
how to use dynamically column_name and column_name value in plsql procedure.
for example, i have one table with column col1.i want write plsql code with dynamically execute the insert one schema to another schema.
by
siva

DECLARE
CURSOR C
IS
SELECT cc_cd
FROM TEMP1 WHERE s_flg ='A' AND b_num IN('826114');--,'709537','715484');
CURSOR D
IS
SELECT * FROM cONSTRAINTS_test ORDER BY SRL_NUM;
STMT VARCHAR2(4000);
p_target_schema VARCHAR2(30):='schema1';
p_source_schema VARCHAR2(30):='schema2';
BEGIN
FOR REC IN C
LOOP
FOR REC1 IN D
LOOP
STMT := 'INSERT INTO '||p_target_schema||''||'.'||''||REC1.CHILD_TABLE||' SELECT * FROM '||p_source_schema||''||'.'||''||REC1.CHILD_TABLE||' where '||REC1.COLUMN_NAME||'='||REC.cntrct_cd||'';
Dbms_Output.Put_Line('THE VALUE STMT:'||STMT);
END LOOP;
END LOOP;
END;
cc_cd='434se22442ss3433';
cc_t_ms is parent table-----------------------pk_cc_cd is primary key
cc_cd is column name
CONSTRAINTS_test table
CHILD_TABLE NOT NULL VARCHAR2(30)
CONSTRAINT_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(400)
R_CONSTRAINT_NAME VARCHAR2(30)
CONSTRAINT_TYPE VARCHAR2(1)
PARENT_TABLE NOT NULL VARCHAR2(30)
SRL_NUM NUMBER(4)
CHILD_TABLE     CONSTRAINT_NAME     COLUMN_NAME     R_CONSTRAINT_NAME     CONSTRAINT_TYPE     PARENT_TABLE     SRL_NUM
a aaa cc_CD     pk_cc_CD     R     cc_t_MS     1
bb     bbb      Cc_CD     PK_CC_CD     R     cc_t_MS     2
bb_v     bb_vsr     S_NUM     PK_S_NUM      R     bb_v      3
cC_HS_MS     cc_hs_CD     cc_CD     PK_CC_CD     R     cc_t_MS     4
cC_HS_LNK cc_HIS_LNK_CD     H_CD     PK_HS_HCD     R     cC_hs_ms 5
cC_D_EMP     cc_d_EMP     Cc_CD     PK_CC_CD      R     cc_t_MS     6
i want insert schema1 to schema2 with run time of column_name and column value.the column_name and values should dynamically generated
with refential integrity.is it possible?
can any please quick solution.its urgent
by
siva

How to use dynamic list box in survey builder?

Similar Messages

Maybe you are looking for